PhyBase¶

simple module PhyBase

Base module for the Physical (PHY) layer of the LTE/NR protocol stack.

Provides the common functionalities for PHY operations at both the eNodeB and User Equipment (UE) sides, such as the initialization of ChannelModel module instances, one for each Carrier Component (CC) supported by the node, and the transmission of frames over the radio. It provides parameters to configure the transmission power and direction of the node, as well as to enable or disable handover procedures.

Inheritance diagram¶

Known subclasses¶

Name	Type	Description
PhyEnb	simple module	Extends the PhyBase module by providing the specific PHY functions on the eNodeB side. It is responsible for checking if a frame received on the air interface originates from a User Equipment (UE) connected to the eNB itself, and it provides the functions necessary to compute the Channel Status Information (CSI) for the UEs connected to it.
PhyUe	simple module	Extends the PhyBase module by providing specific PHY functions on the User Equipment (UE) side. It ensures that frames received on the air interface are sourced from the serving eNodeB (eNB) and provides functions to manage the handover procedure, including periodic measurement of channel conditions to determine when a handover should occur. If enabled, the selection of the serving eNB at initialization is done dynamically based on radio conditions.

Parameters¶

Name	Type	Default value	Description
isNr	bool	false	True for the NR leg (set by NrNicUe/NrNicEnb on their PHY submodule)
macNodeId	int		MacNodeId of the stack leg this PHY belongs to (set by the NIC)
ueTxPower	double	26dBm
eNodeBTxPower	double	46dBm
microTxPower	double	30dBm
txDirection	string	“OMNI”
txAngle	double	0deg
binderModule	string	“binder”
channelModelModule	string	“^.channelModel[0]”	Set to “^.nrChannelModel[0]” on an NR leg, see NrNicUe

Properties¶

Name	Value	Description
display	i=block/wrxtx

Gates¶

Name	Direction	Description
upperGateIn	input	From upper layer
upperGateOut	output	To upper layer
radioIn	input	Gate to receive message via sendDirect

Source code¶

//
// Base module for the Physical (PHY) layer of the LTE/NR protocol stack.
//
// Provides the common functionalities for PHY operations at both the
// eNodeB and User Equipment (UE) sides, such as the initialization of ChannelModel
// module instances, one for each Carrier Component (CC) supported by the node, and
// the transmission of frames over the radio. It provides parameters to configure
// the transmission power and direction of the node, as well as to enable or disable
// handover procedures.
//
simple PhyBase like IPhy
{
    parameters:
        @display("i=block/wrxtx");
        bool isNr = default(false);   // True for the NR leg (set by NrNicUe/NrNicEnb on their PHY submodule)
        int macNodeId;                // MacNodeId of the stack leg this PHY belongs to (set by the NIC)
        double ueTxPower @unit(dBm) = default(26dBm);
        double eNodeBTxPower @unit(dBm) = default(46dBm);
        double microTxPower @unit(dBm) = default(30dBm);
        string txDirection @enum(ANISOTROPIC,OMNI) = default("OMNI");
        double txAngle @unit(deg) = default(0deg);

        string binderModule = default("binder");
        string channelModelModule = default("^.channelModel[0]"); // Set to "^.nrChannelModel[0]" on an NR leg, see ~NrNicUe

    gates:
        input upperGateIn;       // From upper layer
        output upperGateOut;    // To upper layer
        input radioIn;           // Gate to receive message via sendDirect
}

File: src/simu5g/stack/phy/PhyBase.ned