gNodeB¶

compound module gNodeB

Implements a gNodeB for a 5G network. It extends the eNodeB module by providing 5G connectivity to NrUe modules. It can be used in either StandAlone (SA) or Non-StandAlone (NSA) 5G deployments. In the former case, it is directly connected to a Upf module. In the latter case, this module can be configured as a secondary node of a eNodeB module, thus enabling E-UTRA Dual Connectivity (EN-DC).

Usage diagram¶

Inheritance diagram¶

Used in¶

Name	Type	Description
ExtClientServer_bgCells	network	ExtClientServerExample with background cells instead of external ones: one gNodeB served by a Upf core, a router in front of the Upf, one NrUe, and numBgCells BackgroundCell cells. The router has no simulated peer: the host it talks to, and the applications on the NrUe, are configured in the ini file.
ExtClientServerExample	network	One gNodeB served by a Upf core, a router in front of the Upf, and one NrUe. numExtCells ExtCell cells can be added as interferers. The router has no simulated peer: the host it talks to, and the applications on the NrUe, are configured in the ini file.
ExtServerExample	network	One gNodeB served by a Upf core, a router in front of the Upf, and two NrUe terminals. numExtCells ExtCell cells can be added as interferers. The router has no simulated peer: the host it talks to, and the applications on the UEs, are configured in the ini file.
ExtMecAppExample	network	One gNodeB and one MecHost hung off the same intermediate Upf, behind an anchor Upf that carries the Ualcmp and, behind it, the MecOrchestrator, plus one NrUe. Nothing here is external: which node talks to a real host, and over which interface, is configured in the ini file.
ExtUeAppExample	network	One gNodeB and one MecHost hung off the same intermediate Upf, behind an anchor Upf that carries the Ualcmp and, behind it, the MecOrchestrator, plus one NrUe. Nothing here is external: which node talks to a real host, and over which interface, is configured in the ini file.
ExtUeAppMecAppExample	network	One gNodeB and one MecHost hung off the same intermediate Upf, behind an anchor Upf that carries the Ualcmp and, behind it, the MecOrchestrator, plus one NrUe. Nothing here is external: which node talks to a real host, and over which interface, is configured in the ini file.
Highway	network	Two gNodeB cells on a shared 5GC Upf, joined by an X2 link, with a router and a server behind the core. The cars are NrCar nodes created at run time by the VeinsInetManager from a SUMO road traffic simulation, so the car[] vector is empty in the topology itself.
EthernetSessions	network	A 5G standalone network whose UPF anchors Ethernet PDU sessions: its Ethernet N6 link goes to dnStation, a host of the data network’s Ethernet LAN, and its IP N6 link to a router and a server, for the UEs of IP sessions. With hasSecondGnb, a second gNB (with an X2 link to the first) lets a UE hand over. device[] are the Ethernet devices behind ue[0], which is then an Ethernet bridge (see the ethernetMode parameter of LteUe).
MultiMecHost	network	Two gNodeB cells, each on an intermediate Upf of its own with a MecHost hung off it, so every cell has its own MEC host. Both intermediate Upf nodes meet at the anchor Upf, which carries the Ualcmp and, behind it, the MecOrchestrator. An X2 link joins the two gNodeBs. numUe NrUe terminals attach, and numBgCells BackgroundCell cells can be added as interferers.
MultiOperator	network	Two operator networks side by side. Each has three gNodeB cells chained by X2, an intermediate Upf that feeds them and carries the operator’s MecHost, an anchor Upf, and a Ualcmp with its MecOrchestrator. The two anchor Upf nodes meet at a shared router, the only node the operators have in common. numUe_A and numUe_B NrUe terminals attach to operator A and B respectively, and numBgCells BackgroundCell cells can be added as interferers.
MultiMecHost_delay	network	MultiMecHost with the two intermediate Upf nodes linked directly to each other, and with no X2 link between the gNodeBs. The length of that link – and so its propagation delay – follows the routersDelay parameter, which makes the distance between the two MEC hosts configurable.
RnisTest	network	The topology of SingleMecHost – one gNodeB and one MecHost on a shared intermediate Upf, with a Ualcmp and a MecOrchestrator behind the anchor Upf – without its playground size parameters. numUes NrUe terminals attach to the gNodeB.
SingleMecHost	network	One gNodeB and one MecHost hung off the same intermediate Upf, behind an anchor Upf that carries the Ualcmp and, behind it, the MecOrchestrator. numUes NrUe terminals attach to the gNodeB.
MultiCell_Standalone	network	Two gNodeB cells served by a 5G core: the anchor Upf faces the data network (a router and a server), an intermediate Upf feeds both gNodeBs, and an X2 link joins them. numUe NrUe terminals attach, and numBgCells BackgroundCell cells can be added as interferers.
MultiCell_withSecondaryGnb	network	The two-cell version of SingleCell_withSecondaryGnb: two eNodeB masters, each paired over X2 with its own gNodeB secondary, and a further X2 link between the two masters. Both eNodeBs connect to the EPC PgwStandard, which faces a router and a server; neither gNodeB has a core-network link. numUe NrUe terminals attach, and numBgCells BackgroundCell cells can be added as interferers.
SingleCell_Standalone	network	One gNodeB served by a 5G core: the anchor Upf faces the data network (a router and a server), and an intermediate Upf sits between it and the gNodeB. numUe NrUe terminals attach to the gNodeB, and numBgCells BackgroundCell cells can be added around it as interferers.
SingleCell_Standalone_D2D	network	SingleCell_Standalone with its UEs split into three vectors, so that a configuration can address cellular terminals (ueCell), D2D transmitters (ueD2DTx) and D2D receivers (ueD2DRx) separately. The rest of the topology is the same: one gNodeB behind an intermediate and an anchor Upf, with a router and a server on the data network, plus numBgCells BackgroundCell interferers.
SingleCell_withSecondaryEnb	network	The mirror image of SingleCell_withSecondaryGnb: here the gNodeB is the master node and the eNodeB is its secondary, so the UE is anchored on its NR stack and its LTE stack carries the secondary cell group. All data-plane traffic enters at the gNodeB.
SingleCell_withSecondaryGnb	network	An EN-DC topology: an eNodeB master paired over X2 with a gNodeB secondary. The eNodeB is the only node with a core-network link – an EPC PgwStandard facing a router and a server – so all data-plane traffic enters there, and the gNodeB contributes its radio leg alone. numUe NrUe terminals attach to both, and numBgCells BackgroundCell cells can be added as interferers.
UrbanNetwork	network	(no description)

Extends¶

Name	Type	Description
eNodeB	compound module	Models an evolved Node B (eNB) of a 4G LTE network. It is a specialized device equipped with a Network Interface Card (NIC) that enables communication with the LteUe devices connected to it. It serves as an access point that routes packets between the UEs and the 4G Core Network. Packets arriving from the UEs are tunneled to the appropriate next hop in the core network (e.g., the PDN Gateway, PGW) using the GPRS Tunneling Protocol (GTP). Conversely, packets received from the core network are detunneled and sent to the appropriate destination UE. In addition to the 4G NIC, this compound module includes a configurable number of wired interfaces to connect with routers of the core network or directly to the PgwStandard module, which serves as the IP module to perform forwarding, and the UserPlaneRelay that relays between the NIC and the GTP tunnels: its TrafficFlowFilter classifies incoming packets and determines the next hop, and its GtpUser handles GTP (de)tunneling. Furthermore, it features a configurable number of LteX2App modules to facilitate peer-to-peer communications with other eNodeBs within the same LTE network.

Parameters¶

Name	Type	Default value	Description
nodeType	string	“GNODEB”	DO NOT CHANGE
gateway	string	“upf”
masterId	int	0	ID of the master eNodeB. Used in case of Dual Connectivity
macNodeId	int	1+simu5g_seq(“eNodeB_macNodeId”)
macCellId	int	macNodeId
txPower	double	100mw
hasD2D	bool	false
hasIpv4	bool	true
hasIpv6	bool	false
numApps	int	0	Number of apps
numX2Apps	int	0	Number of X2 apps; set their types in the ini file, e.g. x2App[0..1].typename=”X2AppClient”
hasUdp	bool	true
hasTcp	bool	firstAvailableOrEmpty(“Tcp”, “TcpLwip”, “TcpNsc”) != “”
hasSctp	bool	true
mecHost	string	“”	Symbolic name of the connected MEHost in the Network
hasRniSupport	bool	false
extMeAppsAddress	string	“”	Address of the external MeApp IP/mask
mcc	string	“001”	Test network
mnc	string	“01”	Test network

Properties¶

Name	Value	Description
display	i=device/antennatower;bgb=1500,600
labels	node,ethernet-node,wireless-node
networkNode

Gates¶

Name	Direction	Description
ppp	inout	Connection to the Core Network
radioIn	input	Connection to the radio interface
x2 [ ]	inout	Connection to the X2 interface
pppMEHost	inout	Connection to the GtpEndpoint module inside MEHost

Statistics¶

Name	Title	Source	Record	Unit	Interpolation Mode	Description
posX		xCoord(mobilityPos(mobilityStateChanged))	vector?
posY		yCoord(mobilityPos(mobilityStateChanged))	vector?

Unassigned submodule parameters¶

Name	Type	Default value	Description
interfaceTable ↗.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
interfaceTable ↗.displayAddresses	bool	false	Whether to display IP addresses on links
mobility ↗.displayStringTextFormat	string	“p: {position}\nv: {velocity}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
mobility ↗.subjectModule	string	“^”	The module path that determines the subject module, the motion of which this mobility model describes. The default value is the parent module
mobility ↗.coordinateSystemModule	string	“”	The module path of the geographic coordinate system module; optional, empty disables geographic conversion (and the {geo_position} directive)
mobility ↗.updateDisplayString	bool	true	Enables continuous update of the subject module’s position by modifying its display string
mobility ↗.constraintAreaMinX	double	-inf m	The minimum x position of the constraint area. It is unconstrained by default (negative infinity)
mobility ↗.constraintAreaMinY	double	-inf m	The minimum y position of the constraint area. It is unconstrained by default (negative infinity)
mobility ↗.constraintAreaMinZ	double	-inf m	The minimum z position of the constraint area. It is unconstrained by default (negative infinity)
mobility ↗.constraintAreaMaxX	double	inf m	The maximum x position of the constraint area. It is unconstrained by default (positive infinity)
mobility ↗.constraintAreaMaxY	double	inf m	The maximum y position of the constraint area. It is unconstrained by default (positive infinity)
mobility ↗.constraintAreaMaxZ	double	inf m	The maximum z position of the constraint area. It is unconstrained by default (positive infinity)
mobility ↗.initialX	double	uniform(this.constraintAreaMinX, this.constraintAreaMaxX)
mobility ↗.initialY	double	uniform(this.constraintAreaMinY, this.constraintAreaMaxY)
mobility ↗.initialZ	double	nanToZero(uniform(this.constraintAreaMinZ, this.constraintAreaMaxZ))
mobility ↗.initialLatitude	double	nan deg
mobility ↗.initialLongitude	double	nan deg
mobility ↗.initialAltitude	double	0m
mobility ↗.initialHeading	double	0deg
mobility ↗.initialElevation	double	0deg
mobility ↗.initialBank	double	0deg
mobility ↗.initFromDisplayString	bool	true	Enables one-time initialization from the subject module’s display string
mobility ↗.updateFromDisplayString	bool	true	Enables continuous update from the subject module’s display string for dragging and rotating it
cellInfo.constraintAreaMinX	double	-1m/0	The minimum X-coordinate of the area constraint, unconstrained by default
cellInfo.constraintAreaMinY	double	-1m/0	The minimum Y-coordinate of the area constraint, unconstrained by default
cellInfo.constraintAreaMaxX	double	1m/0	The maximum X-coordinate of the area constraint, unconstrained by default
cellInfo.constraintAreaMaxY	double	1m/0	The maximum Y-coordinate of the area constraint, unconstrained by default
cellInfo.beaconInterval	double	1s	Interval for sending broadcast messages (used for handover or DAS)
cellInfo.microCell	bool	false	Type of eNodeB (MICRO / MACRO) - valid only for eNodeBs
cellInfo.rbyDl	int	12	Number of sub-carriers per RB in DL
cellInfo.rbyUl	int	12	Number of sub-carriers per RB in UL
cellInfo.rbxDl	int	7	Number of OFDM symbols per slot in DL
cellInfo.rbxUl	int	7	Number of OFDM symbols per slot in UL
cellInfo.rbPilotDl	int	3	Number of pilot Resource Elements per RB in DL
cellInfo.rbPilotUl	int	0	Number of pilot Resource Elements per RB in UL
cellInfo.signalDl	int	1	Number of signaling symbols for each Resource Block in DL
cellInfo.signalUl	int	1	Number of signaling symbols for each Resource Block in UL
cellInfo.numPreferredBands	int	1	Number of preferred bands to use (relevant only in PREFERRED mode)
cellInfo.binderModule	string	“binder”
cellularNic.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cellularNic.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
cellularNic.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
cellularNic.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
cellularNic.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
cellularNic.pcapRecorder ↗.fileFormat	string	“pcapng”
cellularNic.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
cellularNic.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
cellularNic.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
cellularNic.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
cellularNic.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
cellularNic.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
cellularNic.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
cellularNic.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
cellularNic.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
cellularNic.handoverPacketHolder.binderModule	string	“binder”
cellularNic.ip2nic.binderModule	string	“binder”
cellularNic.ip2nic.connectionControlModule	string	“^.rrc.connectionControl”	The node’s control-plane entry point, asked for a bearer on a lookup miss
cellularNic.ip2nic.isNr	bool	false	True for the NR leg (set by NrNicUe/NrNicEnb, or in the ini for a DC master eNB)
cellularNic.ip2nic.hasSdap	bool	false	When true, SDAP handles DRB/RLC assignment; Ip2Nic skips traffic classification
cellularNic.ip2nic.sessionType	string	“”	UE only: the type of the UE’s session (see LteUe), which the payload the NIC delivers up is of; set by the NIC
cellularNic.ip2nic.establishBearersOnDemand	bool	true	When false, a packet that finds no established bearer raises an error instead of establishing one (static bearers are established up front; see the staticDrbs parameter of BearerConfigurator)
cellularNic.ip2nic.d2dBinderModule	string	“d2dBinder”	The network’s D2dBinder, which holds the D2D state
cellularNic.rrc.registration.interfaceTableModule	string
cellularNic.rrc.registration.interfaceName	string	“cellular”
cellularNic.rrc.registration.routingTableModule	string
cellularNic.rrc.registration.binderModule	string	“binder”
cellularNic.rrc.registration.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point (see Rrc), told about a multicast group join
cellularNic.rrc.registration.sessionType	string	“”	UE only: the type of the UE’s session (see LteUe): a UE created during the run gets an IPv4 default route through the NIC only on an IP session, and the NIC of an Ethernet session is an Ethernet port; set by the NIC
cellularNic.rrc.bearerManagement.binderModule	string	“binder”	To reach a peer’s BearerManagement on RLF
cellularNic.rrc.bearerManagement.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point (see Rrc), which a torn-down bearer’s DRB identity goes back through
cellularNic.rrc.bearerManagement.t311	double	0s	RRC re-establishment cell-selection timer (0 => release-to-IDLE)
cellularNic.rrc.bearerManagement.t301	double	0.1s	RRC re-establishment (request -> complete) timer
cellularNic.rrc.bearerManagement.headerCompressedSize	int	-1B	Removed, an error if set: header compression is configured per bearer (the rohc field of BearerConfigurator’s bearer definitions)
cellularNic.rrc.bearerManagement.pdcpEntityModuleType	string	“simu5g.stack.pdcp.LtePdcpEntity”	PDCP entity types: the full PDCP entity is a compound (PdcpEntityBase, TX+RX sides plus the leg split/join stage of a multi-leg bearer); the instantiable types are its subclasses (LtePdcpEntity, NrPdcpEntity). At a DC secondary a bearer’s PDCP lives at the master, so the secondary installs an PdcpRelayEntity (tunnels PDUs to/from the master) in its place.
cellularNic.rrc.bearerManagement.pdcpRelayEntityModuleType	string	“simu5g.stack.pdcp.PdcpRelayEntity”
cellularNic.rrc.bearerManagement.dualConnectivityEnabled	bool	false	Set by the NIC; two-leg (split-capable) bearers
cellularNic.rrc.bearerManagement.rlcTmEntityModuleType	string	“simu5g.stack.rlc.RlcTmEntity”	RLC entity types (compound modules): lteRlc* = LTE-FI bearers (TS 36.322), nrRlc* = NR bearers (SI/SO wire format, TS 38.322)
cellularNic.rrc.bearerManagement.lteRlcUmEntityModuleType	string	“simu5g.stack.rlc.LteRlcUmEntity”
cellularNic.rrc.bearerManagement.lteRlcAmEntityModuleType	string	“simu5g.stack.rlc.LteRlcAmEntity”
cellularNic.rrc.bearerManagement.nrRlcUmEntityModuleType	string	“simu5g.stack.rlc.NrRlcUmEntity”
cellularNic.rrc.bearerManagement.nrRlcAmEntityModuleType	string	“simu5g.stack.rlc.NrRlcAmEntity”
cellularNic.rrc.bearerManagement.registrationModule	string	“^.registration”	Module references for accessing other stack layers
cellularNic.rrc.bearerManagement.drbTableModule	string	“^.drbTable”
cellularNic.rrc.bearerManagement.ip2nicModule	string	“^.^.ip2nic”
cellularNic.rrc.bearerManagement.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”	Attachment-ledger push target (UE only)
cellularNic.rrc.bearerManagement.pdcpMuxModule	string	“^.^.pdcpMux”
cellularNic.rrc.bearerManagement.pdcpDcMuxModule	string	“^.^.pdcpDcMux”
cellularNic.rrc.bearerManagement.d2dModeControllerModule	string	“^.d2dModeController”
cellularNic.rrc.bearerManagement.rlcMuxModule	string	“^.^.rlcMux”
cellularNic.rrc.bearerManagement.nrRlcMuxModule	string	“^.^.nrRlcMux”
cellularNic.rrc.bearerManagement.macModule	string	“^.^.mac”
cellularNic.rrc.bearerManagement.nrMacModule	string	“^.^.nrMac”
cellularNic.rrc.bearerManagement.sdapModule	string	“^.^.sdap”	Configuration push target; unresolvable (no SDAP on the NIC) = no pushes
cellularNic.rrc.bearerManagement.qosFlowClassifierModule	string	“^.^.qosFlowClassifier”	Uplink QFI rule push target; unresolvable (not a UE stack with SDAP) = no pushes
cellularNic.rrc.connectionControl.binderModule	string	“binder”
cellularNic.rrc.connectionControl.bearerConfiguratorModule	string	“bearerConfigurator”
cellularNic.rrc.connectionControl.coreControlModule	string	“coreControl”
cellularNic.rrc.connectionControl.bearerManagementModule	string	“^.bearerManagement”
cellularNic.rrc.connectionControl.macModule	string	“^.^.mac”
cellularNic.rrc.connectionControl.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”
cellularNic.rrc.connectionControl.gtpUserModule	string	“^.^.^.relay.gtpUser”
cellularNic.rrc.connectionControl.gtpUserX2Module	string	“^.^.^.gtpUserX2”
cellularNic.rrc.connectionControl.macNodeId	int		The base station’s node id; the NIC sets it from the node’s
cellularNic.rrc.connectionControl.gateway	string	“”	The node’s core network gateway, as its gateway parameter names it; ignored at a node not connected to a core network (a secondary node)
cellularNic.rrc.nrConnectionControl.dynamicCellAssociation	bool	false
cellularNic.rrc.nrConnectionControl.enableHandover	bool	false	Allows handovers in the UE
cellularNic.rrc.nrConnectionControl.isNr	bool		Whether this instance is associated with the NR or the LTE stack
cellularNic.rrc.nrConnectionControl.macNodeId	int		MacNodeId of the stack leg this controller belongs to (set by the NIC)
cellularNic.rrc.nrConnectionControl.sessionType	string		The type of the session the UE requests at connection setup (see LteUe), set by the NIC
cellularNic.rrc.nrConnectionControl.handoverLatency	double	50ms	Handover duration
cellularNic.rrc.nrConnectionControl.handoverDetachmentTime	double	handoverLatency > 0s ? handoverLatency/2 : 25ms
cellularNic.rrc.nrConnectionControl.handoverAttachmentTime	double	handoverLatency > 0s ? handoverLatency-handoverDetachmentTime : handoverDetachmentTime
cellularNic.rrc.nrConnectionControl.minRssiDefault	bool	true	Whether minRssi is taken from PhyPisaData instead of the minRssi parameter
cellularNic.rrc.nrConnectionControl.minRssi	double	-99.0dB	Configurable minimum threshold RSSI for attaching to an eNB (meaningful only if minRssiDefault==false)
cellularNic.rrc.nrConnectionControl.hysteresisFactor	double	10
cellularNic.rrc.nrConnectionControl.binderModule	string	“binder”
cellularNic.rrc.nrConnectionControl.macModule	string	“^.^.mac”
cellularNic.rrc.nrConnectionControl.bearerManagementModule	string	“^.bearerManagement”
cellularNic.rrc.nrConnectionControl.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”
cellularNic.rrc.nrConnectionControl.feedbackGeneratorModule	string	“^.^.dlFbGen”	TODO or “^.^.nrDlFbGen”
cellularNic.rrc.nrConnectionControl.otherConnectionControlModule	string	“”
cellularNic.rrc.nrConnectionControl.hasCollector	bool	false	True when node has a collector module (ueCollector/nrUeCollector) for this PHY module
cellularNic.rrc.d2dModeSelection.modeSelectionPeriod	double	1s
cellularNic.rrc.d2dModeSelection.binderModule	string	“binder”
cellularNic.rrc.d2dModeSelection.d2dBinderModule	string	“d2dBinder”	The network’s D2dBinder, which holds the D2D state
cellularNic.rrc.d2dModeSelection.macModule	string	“^.^.mac”
cellularNic.rrc.d2dModeSelection.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point, which knows the UEs handing over
cellularNic.rlcMux.bearerManagementModule	string	“^.rrc.bearerManagement”
cellularNic.phy.isNr	bool	false	True for the NR leg (set by NrNicUe/NrNicEnb on their PHY submodule)
cellularNic.phy.macNodeId	int		MacNodeId of the stack leg this PHY belongs to (set by the NIC)
cellularNic.phy.ueTxPower	double	26dBm
cellularNic.phy.eNodeBTxPower	double	46dBm
cellularNic.phy.microTxPower	double	30dBm
cellularNic.phy.txDirection	string	“OMNI”
cellularNic.phy.txAngle	double	0deg
cellularNic.phy.binderModule	string	“binder”
cellularNic.phy.channelModelModule	string	“^.channelModel[0]”	Set to “^.nrChannelModel[0]” on an NR leg, see NrNicUe
cellularNic.phy.enableHandover	bool	false	Marks this eNB as a handover target: its beacons are used by UEs for handover feasibility assessment. Requires enableBeacons=true (the default when handover is on); the module errors out at initialization if beacons are disabled while handover is enabled.
cellularNic.phy.enableBeacons	bool	enableHandover	Enables broadcasting periodic beacons (at cellInfo.beaconInterval). Beacons are the measurement signal UEs use both for handover feasibility assessment and for radio link monitoring (RLF detection), decoupled from enableHandover so radio link monitoring can run without handover. Defaults to enableHandover (beacons flow exactly when handover is enabled). cellInfo.beaconInterval must be positive: a zero/negative interval is an error – switch beacons off with enableBeacons=false.
cellularNic.phy.targetBler	double	0.001
cellularNic.packetFlowObserver.macModule	string	“^.mac”
cellularNic.packetFlowObserver.pdcpModule	string	“^”
cellularNic.packetFlowObserver.rlcModule	string	“^”
cellularNic.packetFlowObserver.isNrObserver	bool	false
cellularNic.packetFlowObserver.pfmType	string	“PacketFlowObserverEnb”
cellularNic.pdcpDcMux.bearerManagementModule	string	“^.rrc.bearerManagement”
cellularNic.x2Manager.interfaceTableModule	string
cellularNic.x2Manager.binderModule	string	“binder”
cellularNic.compManager.compNodeType	string	“COMP_CLIENT”
cellularNic.compManager.coordinatorId	int		ID of the coordinator node
cellularNic.compManager.clientList	object	[]	Space-separated list of client node identifiers
cellularNic.compManager.coordinationPeriod	double	0.001s	The time interval between two coordination events
cellularNic.compManager.binderModule	string	“binder”
cellularNic.handoverX2Forwarder.losslessHandover	bool	false
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.displayStringTextFormat	string	“p: {position}\nv: {velocity}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.subjectModule	string	“^”	The module path that determines the subject module, the motion of which this mobility model describes. The default value is the parent module
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.coordinateSystemModule	string	“”	The module path of the geographic coordinate system module; optional, empty disables geographic conversion (and the {geo_position} directive)
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.updateDisplayString	bool	true	Enables continuous update of the subject module’s position by modifying its display string
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMinX	double	-inf m	The minimum x position of the constraint area. It is unconstrained by default (negative infinity)
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMinY	double	-inf m	The minimum y position of the constraint area. It is unconstrained by default (negative infinity)
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMinZ	double	-inf m	The minimum z position of the constraint area. It is unconstrained by default (negative infinity)
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMaxX	double	inf m	The maximum x position of the constraint area. It is unconstrained by default (positive infinity)
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMaxY	double	inf m	The maximum y position of the constraint area. It is unconstrained by default (positive infinity)
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMaxZ	double	inf m	The maximum z position of the constraint area. It is unconstrained by default (positive infinity)
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialX	double	uniform(this.constraintAreaMinX, this.constraintAreaMaxX)
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialY	double	uniform(this.constraintAreaMinY, this.constraintAreaMaxY)
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialZ	double	nanToZero(uniform(this.constraintAreaMinZ, this.constraintAreaMaxZ))
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialLatitude	double	nan deg
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialLongitude	double	nan deg
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialAltitude	double	0m
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialHeading	double	0deg
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialElevation	double	0deg
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialBank	double	0deg
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initFromDisplayString	bool	true	Enables one-time initialization from the subject module’s display string
cellularNic.bgTrafficGenerator.bgUE.mobility ↗.updateFromDisplayString	bool	true	Enables continuous update from the subject module’s display string for dragging and rotating it
cellularNic.bgTrafficGenerator.bgUE.generator.computeAvgInterference	bool
cellularNic.bgTrafficGenerator.bgUE.generator.enablePeriodicCqiUpdate	bool
cellularNic.bgTrafficGenerator.bgUE.generator.useProbabilisticCqi	bool
cellularNic.bgTrafficGenerator.bgUE.generator.backgroundTrafficManagerModule	string	“^.^.manager”
cellularNic.bgTrafficGenerator.bgUE.generator.startTimeDl	double	-1s
cellularNic.bgTrafficGenerator.bgUE.generator.startTimeUl	double	-1s
cellularNic.bgTrafficGenerator.bgUE.generator.headerLen	int	33B
cellularNic.bgTrafficGenerator.bgUE.generator.txPower	double	26dBm
cellularNic.bgTrafficGenerator.bgUE.generator.fbPeriod	int	6tti
cellularNic.bgTrafficGenerator.bgUE.generator.periodDl	double	uniform(10ms,50ms)
cellularNic.bgTrafficGenerator.bgUE.generator.periodUl	double	uniform(10ms,50ms)
cellularNic.bgTrafficGenerator.bgUE.generator.packetSizeDl	int	intuniform(20B,100B)
cellularNic.bgTrafficGenerator.bgUE.generator.packetSizeUl	int	intuniform(20B,100B)
cellularNic.bgTrafficGenerator.bgUE.generator.rtxRateDl	double	0.1
cellularNic.bgTrafficGenerator.bgUE.generator.rtxDelayDl	double	0.006s
cellularNic.bgTrafficGenerator.bgUE.generator.rtxRateUl	double	0.1
cellularNic.bgTrafficGenerator.bgUE.generator.rtxDelayUl	double	0.006s
cellularNic.bgTrafficGenerator.bgUE.generator.cqiMeanDl	double	15	These values are only considered when periodicCqi == false && computeAvgInterference == false
cellularNic.bgTrafficGenerator.bgUE.generator.cqiMeanUl	double	15
cellularNic.bgTrafficGenerator.bgUE.generator.cqiStddevDl	double	0
cellularNic.bgTrafficGenerator.bgUE.generator.cqiStddevUl	double	0
cellularNic.bgTrafficGenerator.manager.binderModule	string	“binder”
cellularNic.bgTrafficGenerator.manager.numBgUes	int
cellularNic.bgTrafficGenerator.manager.macModule	string	“^.^.mac”
cellularNic.bgTrafficGenerator.manager.phyModule	string	“^.^.phy”
cellularNic.bgTrafficGenerator.manager.enablePeriodicCqiUpdate	bool
cellularNic.bgTrafficGenerator.manager.computeAvgInterference	bool
pppIf ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pppIf ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
pppIf ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pppIf ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pppIf ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pppIf ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
pppIf ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
pppIf ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pppIf ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pppIf ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pppIf ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pppIf ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pppIf ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pppIf ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pppIf ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pppIf ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pppIf ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
pppIf ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
pppIf ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
pppIf ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
pppIf ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
pppIf ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pppIf ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
pppIf ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
pppIf ↗.ppp ↗.mtu	int	4470B
pppIf ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
pppIf ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
x2ppp ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
x2ppp ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
x2ppp ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
x2ppp ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
x2ppp ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
x2ppp ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
x2ppp ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
x2ppp ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
x2ppp ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
x2ppp ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
x2ppp ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
x2ppp ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
x2ppp ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
x2ppp ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
x2ppp ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
x2ppp ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
x2ppp ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
x2ppp ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
x2ppp ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
x2ppp ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
x2ppp ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
x2ppp ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
x2ppp ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
x2ppp ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
x2ppp ↗.ppp ↗.mtu	int	4470B
x2ppp ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
x2ppp ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
pppMEHostIf ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pppMEHostIf ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
pppMEHostIf ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pppMEHostIf ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pppMEHostIf ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pppMEHostIf ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
pppMEHostIf ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
pppMEHostIf ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pppMEHostIf ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pppMEHostIf ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pppMEHostIf ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pppMEHostIf ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pppMEHostIf ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pppMEHostIf ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pppMEHostIf ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pppMEHostIf ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pppMEHostIf ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
pppMEHostIf ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
pppMEHostIf ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
pppMEHostIf ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
pppMEHostIf ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
pppMEHostIf ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pppMEHostIf ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
pppMEHostIf ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
pppMEHostIf ↗.ppp ↗.mtu	int	4470B
pppMEHostIf ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
pppMEHostIf ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
ipv4 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.configurator ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv4 ↗.configurator ↗.routingTableModule	string
ipv4 ↗.configurator ↗.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
ipv4 ↗.configurator ↗.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
ipv4 ↗.routingTable ↗.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv4 ↗.routingTable ↗.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
ipv4 ↗.routingTable ↗.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
ipv4 ↗.routingTable ↗.forwarding	bool	true	Turns IP forwarding on/off
ipv4 ↗.routingTable ↗.multicastForwarding	bool	false	Turns multicast forwarding on/off
ipv4 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
ipv4 ↗.routingTable ↗.routingFile	string	“”	Routing table file name
ipv4 ↗.natTable ↗.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.natTable ↗.networkProtocolModule	string	“^.ip”
ipv4 ↗.natTable ↗.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
ipv4 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ipv4 ↗.up ↗.forwardServiceRegistration	bool	true
ipv4 ↗.up ↗.forwardProtocolRegistration	bool	true
ipv4 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ipv4 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ipv4 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ipv4 ↗.igmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.igmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv4 ↗.igmp ↗.routingTableModule	string
ipv4 ↗.igmp ↗.checksumMode	string	“declared”
ipv4 ↗.igmp ↗.enabled	bool	true
ipv4 ↗.igmp ↗.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
ipv4 ↗.igmp ↗.queryInterval	double	125s
ipv4 ↗.igmp ↗.queryResponseInterval	double	10s
ipv4 ↗.igmp ↗.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
ipv4 ↗.igmp ↗.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
ipv4 ↗.igmp ↗.startupQueryInterval	double	queryInterval / 4
ipv4 ↗.igmp ↗.startupQueryCount	int	robustnessVariable
ipv4 ↗.igmp ↗.lastMemberQueryInterval	double	1s
ipv4 ↗.igmp ↗.lastMemberQueryCount	int	robustnessVariable
ipv4 ↗.igmp ↗.unsolicitedReportInterval	double	10s
ipv4 ↗.icmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.icmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv4 ↗.icmp ↗.routingTableModule	string
ipv4 ↗.icmp ↗.checksumMode	string	“declared”
ipv4 ↗.icmp ↗.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
ipv4 ↗.mp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.mp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ipv4 ↗.mp ↗.forwardServiceRegistration	bool	true
ipv4 ↗.mp ↗.forwardProtocolRegistration	bool	true
ipv4 ↗.mp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ipv4 ↗.mp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ipv4 ↗.mp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ipv4 ↗.ip ↗.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.ip ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv4 ↗.ip ↗.routingTableModule	string
ipv4 ↗.ip ↗.arpModule	string
ipv4 ↗.ip ↗.icmpModule	string
ipv4 ↗.ip ↗.checksumMode	string	“declared”
ipv4 ↗.ip ↗.timeToLive	int	32
ipv4 ↗.ip ↗.multicastTimeToLive	int	32
ipv4 ↗.ip ↗.fragmentTimeout	double	60s
ipv4 ↗.ip ↗.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
ipv4 ↗.ip ↗.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
ipv4 ↗.ip ↗.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
ipv4 ↗.ip ↗.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
ipv4 ↗.ip ↗.maxLifetime	double	-1s	Packets older than the limit are discarded
ipv4 ↗.arp ↗.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.arp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv4 ↗.arp ↗.routingTableModule	string
ipv4 ↗.arp ↗.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
ipv4 ↗.arp ↗.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
ipv4 ↗.arp ↗.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
ipv4 ↗.arp ↗.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
ipv4 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.ipsec ↗.networkProtocolModule	string	“^.ip”
ipv4 ↗.ipsec ↗.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
ipv4 ↗.ipsec ↗.interfaceTableModule	string
ipv4 ↗.ipsec ↗.spdModule	string	“^.spd”
ipv4 ↗.ipsec ↗.sadModule	string	“^.sad”
ipv4 ↗.ipsec ↗.spdConfig	xml
ipv4 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
ipv4 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
ipv4 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
ipv4 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
ipv4 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
ipv4 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
ipv4 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
ipv4 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
ipv4 ↗.ipsec ↗.espProtectInDelay	double	0.0s
ipv4 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv4 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ipv4 ↗.lp ↗.forwardServiceRegistration	bool	true
ipv4 ↗.lp ↗.forwardProtocolRegistration	bool	true
ipv4 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ipv4 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ipv4 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ipv6 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.configurator ↗.interfaceTableModule	string
ipv6 ↗.configurator ↗.routingTableModule	string
ipv6 ↗.configurator ↗.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
ipv6 ↗.configurator ↗.configureRoutingTable	bool	true
ipv6 ↗.routingTable ↗.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv6 ↗.routingTable ↗.routes	xml	xml(“<routingTable/>”)
ipv6 ↗.routingTable ↗.forwarding	bool	false
ipv6 ↗.routingTable ↗.isRouter	bool	this.forwarding
ipv6 ↗.routingTable ↗.multicastForwarding	bool	false
ipv6 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
ipv6 ↗.routingTable ↗.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
ipv6 ↗.routingTable ↗.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
ipv6 ↗.routingTable ↗.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
ipv6 ↗.routingTable ↗.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
ipv6 ↗.routingTable ↗.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
ipv6 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ipv6 ↗.up ↗.forwardServiceRegistration	bool	true
ipv6 ↗.up ↗.forwardProtocolRegistration	bool	true
ipv6 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ipv6 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ipv6 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ipv6 ↗.icmpv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.icmpv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv6 ↗.icmpv6 ↗.checksumMode	string	“declared”
ipv6 ↗.icmpv6 ↗.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
ipv6 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ipv6 ↗.lp ↗.forwardServiceRegistration	bool	true
ipv6 ↗.lp ↗.forwardProtocolRegistration	bool	true
ipv6 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ipv6 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ipv6 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ipv6 ↗.neighbourDiscovery ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.neighbourDiscovery ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv6 ↗.neighbourDiscovery ↗.checksumMode	string	“declared”
ipv6 ↗.neighbourDiscovery ↗.icmpv6Module	string
ipv6 ↗.neighbourDiscovery ↗.mipv6Module	string
ipv6 ↗.neighbourDiscovery ↗.routingTableModule	string
ipv6 ↗.neighbourDiscovery ↗.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
ipv6 ↗.neighbourDiscovery ↗.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
ipv6 ↗.neighbourDiscovery ↗.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
ipv6 ↗.neighbourDiscovery ↗.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
ipv6 ↗.neighbourDiscovery ↗.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
ipv6 ↗.neighbourDiscovery ↗.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
ipv6 ↗.neighbourDiscovery ↗.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
ipv6 ↗.neighbourDiscovery ↗.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
ipv6 ↗.neighbourDiscovery ↗.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
ipv6 ↗.neighbourDiscovery ↗.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
ipv6 ↗.ipv6 ↗.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.ipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv6 ↗.ipv6 ↗.routingTableModule	string
ipv6 ↗.ipv6 ↗.ipv6NeighbourDiscoveryModule	string
ipv6 ↗.ipv6 ↗.icmpv6Module	string
ipv6 ↗.ipv6 ↗.procDelay	double	0s
ipv6 ↗.ipv6 ↗.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
ipv6 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.ipsec ↗.interfaceTableModule	string
ipv6 ↗.ipsec ↗.spdModule	string	“^.spd”
ipv6 ↗.ipsec ↗.sadModule	string	“^.sad”
ipv6 ↗.ipsec ↗.spdConfig	xml
ipv6 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
ipv6 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
ipv6 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
ipv6 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
ipv6 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
ipv6 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
ipv6 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
ipv6 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
ipv6 ↗.ipsec ↗.espProtectInDelay	double	0.0s
ipv6 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.mipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.mipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
ipv6 ↗.mipv6 ↗.ipv6NeighbourDiscoveryModule	string
ipv6 ↗.mipv6 ↗.bindingUpdateListModule	string
ipv6 ↗.mipv6 ↗.bindingCacheModule	string
ipv6 ↗.mipv6 ↗.isHomeAgent	bool
ipv6 ↗.mipv6 ↗.isMobileNode	bool
ipv6 ↗.mipv6 ↗.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
ipv6 ↗.mipv6 ↗.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
ipv6 ↗.mipv6 ↗.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
ipv6 ↗.buList ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.bindingCache ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.pmipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.pmipv6 ↗.interfaceTableModule	string		path to the InterfaceTable module
ipv6 ↗.pmipv6 ↗.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
ipv6 ↗.pmipv6 ↗.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
ipv6 ↗.pmipv6 ↗.isMobileAccessGateway	bool	false
ipv6 ↗.pmipv6 ↗.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
ipv6 ↗.pmipv6 ↗.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
ipv6 ↗.pmipv6 ↗.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
ipv6 ↗.mld ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ipv6 ↗.mld ↗.interfaceTableModule	string		path to the InterfaceTable module
ipv6 ↗.mld ↗.routingTableModule	string		path to the Ipv6RoutingTable module
ipv6 ↗.mld ↗.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
ipv6 ↗.mld ↗.enabled	bool	true	when false, MLD is inert on this node (see above)
ipv6 ↗.mld ↗.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
ipv6 ↗.mld ↗.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
ipv6 ↗.mld ↗.queryInterval	double	125s	querier: interval between periodic General Queries
ipv6 ↗.mld ↗.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
ipv6 ↗.mld ↗.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
ipv6 ↗.mld ↗.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
ipv6 ↗.mld ↗.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
ipv6 ↗.mld ↗.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
ipv6 ↗.mld ↗.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
udp ↗.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
udp ↗.interfaceTableModule	string		The path to the InterfaceTable module
udp ↗.checksumMode	string	“declared”
udp ↗.defaultMulticastLoop	bool	true
tcp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
tcp ↗.checksumMode	string	“declared”
tcp ↗.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
tcp ↗.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
tcp ↗.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
tcp ↗.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
tcp ↗.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
tcp ↗.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
tcp ↗.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
tcp ↗.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
tcp ↗.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
tcp ↗.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
tcp ↗.msl	int	120s	Maximum Segment Lifetime
tcp ↗.tcpAlgorithmClass	string	“TcpReno”
tcp ↗.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
tcp ↗.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
tcp ↗.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
tcp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
tcp ↗.ecnWillingness	bool	false	True if willing to use ECN
tcp ↗.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
tcp ↗.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
tcp ↗.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
x2App.client.displayStringTextFormat	string	“{socketState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
x2App.client.localAddress	string	“”	Comma-separated list of addresses
x2App.client.localPort	int	0	Port number to listen on
x2App.client.connectAddress	string		Server address (may be symbolic)
x2App.client.connectPort	int	5000	Port number to connect to
x2App.client.startTime	double	0s	Time the first session begins
x2App.client.numRequestsPerSession	int	1	Number of requests sent per session
x2App.client.numPacketsToReceive	int	0
x2App.client.requestLength	int	1452	Length of a request (bytes)
x2App.client.thinkTime	double	0s	Time gap between requests
x2App.client.waitToClose	double	0s	Time to wait between the last message sent and abort
x2App.client.reconnectInterval	double	0s	If the connection breaks, waits this much before trying to reconnect
x2App.client.inboundStreams	int	17
x2App.client.outboundStreams	int	1
x2App.client.echo	bool	false	Echoes received packages when true
x2App.client.ordered	bool	true
x2App.client.queueSize	int	0
x2App.client.prMethod	int	0	0=NONE, 1=PR_TTL, 2=PR_RTX, 3=PR_PRIO, 4=PR_STRRST
x2App.client.prValue	double	0	For PR-SCTP
x2App.client.streamReset	bool	false
x2App.client.streamRequestTime	double	0s
x2App.client.streamResetType	int	5	NO_RESET=5, RESET_OUTGOING=6, RESET_INCOMING=7, RESET_BOTH=8, SSN_TSN=9
x2App.client.streamToReset	int	0
x2App.client.stopTime	double	-1s	Time of finishing sending, negative values mean forever
x2App.client.primaryTime	double	0s
x2App.client.newPrimary	string	“”
x2App.client.streamRequestLengths	string	“”
x2App.client.streamRequestRatio	string	“”
x2App.client.streamPriorities	string	“”
x2App.client.finishEndsSimulation	bool	false
x2App.client.binderModule	string	“binder”
x2App.server.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
x2App.server.localAddress	string	“”	Comma-separated list of addresses
x2App.server.localPort	int	0	Port number to listen on
x2App.server.echo	bool	false	Echoes received packages when true
x2App.server.echoDelay	double	0s
x2App.server.delayFirstRead	double	0s
x2App.server.readingInterval	double	0s
x2App.server.messagesToPush	int	0
x2App.server.numPacketsToSendPerClient	int	0	Number of requests sent per session
x2App.server.numPacketsToReceivePerClient	int	1
x2App.server.requestLength	int	1452	Length of a request (bytes)
x2App.server.thinkTime	double	0s	Time gap between requests
x2App.server.waitToClose	double	0s	Time to wait between last message sent and abort
x2App.server.finishEndsSimulation	bool	false
x2App.server.ordered	bool	true
x2App.server.inboundStreams	int	17
x2App.server.outboundStreams	int	1
x2App.server.queueSize	int	0
x2App.server.prMethod	int	0	0=NONE, 1=PR_TTL, 2=PR_RTX, 3=PR_PRIO, 4=PR_STRRST
x2App.server.prValue	double	0	For PR-SCTP
x2App.server.streamReset	bool	false
x2App.server.streamRequestTime	double	0s
x2App.server.streamToReset	int	0
x2App.server.streamPriorities	string	“”
x2App.server.binderModule	string	“binder”
sctp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
sctp ↗.interfaceTableModule	string
sctp ↗.routingTableModule	string
sctp ↗.checksumMode	string	“declared”
sctp ↗.numGapReports	int	3
sctp ↗.rtoInitial	double	3s
sctp ↗.rtoMin	double	1s
sctp ↗.rtoMax	double	60s
sctp ↗.rtoAlpha	double	0.125
sctp ↗.rtoBeta	double	0.250
sctp ↗.maxBurst	int	4
sctp ↗.maxBurstVariant	string	“maxBurst”
sctp ↗.initialWindow	int	0
sctp ↗.assocMaxRetrans	int	10
sctp ↗.pathMaxRetrans	int	5
sctp ↗.maxInitRetrans	int	8
sctp ↗.sackPeriod	double	200ms
sctp ↗.sackFrequency	int	2
sctp ↗.reactivatePrimaryPath	bool	false
sctp ↗.sendQueueLimit	int	0
sctp ↗.validCookieLifetime	double	10s
sctp ↗.enableHeartbeats	bool	true
sctp ↗.hbInterval	double	30s
sctp ↗.sendHeartbeatsOnActivePaths	bool	false
sctp ↗.nagleEnabled	bool	true
sctp ↗.naglePoint	int	1468
sctp ↗.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
sctp ↗.fastRecoverySupported	bool	true
sctp ↗.sctpAlgorithmClass	string	“SctpAlg”
sctp ↗.ccModule	int	0	RFC4960=0
sctp ↗.osbWithHeader	bool	false
sctp ↗.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
sctp ↗.ssModule	int	0	ROUND_ROBIN=0
sctp ↗.arwnd	int	65535
sctp ↗.swsLimit	int	3000	Limit for SWS
sctp ↗.udpEncapsEnabled	bool	false
sctp ↗.natFriendly	bool	false
sctp ↗.bytesToAddPerRcvdChunk	int	0	For flow control
sctp ↗.bytesToAddPerPeerChunk	int	0	For flow control
sctp ↗.tellArwnd	bool	false	For flow control
sctp ↗.messageAcceptLimit	int	0	For flow control
sctp ↗.fairStart	double	0s
sctp ↗.fairStop	double	0s
sctp ↗.streamsToPaths	string	“”
sctp ↗.startEndToEndDelay	int	0
sctp ↗.stopEndToEndDelay	int	10
sctp ↗.throughputInterval	double	1
sctp ↗.auth	bool	false
sctp ↗.chunks	string	“”
sctp ↗.padding	bool	false
sctp ↗.addIP	bool	false
sctp ↗.addTime	double	0s
sctp ↗.addAddress	string	“”
sctp ↗.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
sctp ↗.packetDrop	bool	false
sctp ↗.sackNow	bool	false
sctp ↗.highSpeedCC	bool	false
sctp ↗.checkSackSeqNumber	bool	false
sctp ↗.nrSack	bool	false
sctp ↗.disableReneging	bool	false
sctp ↗.gapReportLimit	int	100000000
sctp ↗.gapListOptimizationVariant	string	“none”
sctp ↗.smartOverfullSACKHandling	bool	false
sctp ↗.allowQoSTracking	bool	false
sctp ↗.qosTrackingInterval	double	1.0s
sctp ↗.cmtSendAllVariant	string	“normal”
sctp ↗.cmtRetransmissionVariant	string	“normal”
sctp ↗.cmtCUCVariant	string	“normal”
sctp ↗.cmtBufferSplitVariant	string	“none”
sctp ↗.cmtBufferSplittingUsesOSB	bool	false
sctp ↗.cmtUseSFR	bool	true
sctp ↗.cmtUseDAC	bool	true
sctp ↗.cmtUseFRC	bool	true
sctp ↗.cmtSmartT3Reset	bool	true
sctp ↗.cmtSmartFastRTX	bool	true
sctp ↗.cmtSmartReneging	bool	false
sctp ↗.cmtSlowPathRTTUpdate	bool	false
sctp ↗.cmtChunkReschedulingVariant	string	“none”
sctp ↗.cmtChunkReschedulingThreshold	double	0.5
sctp ↗.cmtMovedChunksReduceCwnd	bool	true
sctp ↗.movedChunkFastRTXFactor	double	2.0
sctp ↗.cmtSackPath	string	“standard”
sctp ↗.strictCwndBooking	bool	false
sctp ↗.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
sctp ↗.cmtCCPathGroups	string	“”
sctp ↗.rpPathBlocking	bool	false
sctp ↗.rpScaleBlockingTimeout	bool	false
sctp ↗.rpMinCwnd	int	1
at ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
at ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
at ↗.forwardServiceRegistration	bool	true
at ↗.forwardProtocolRegistration	bool	true
at ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
at ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
at ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
tn ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
tn ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
tn ↗.forwardServiceRegistration	bool	true
tn ↗.forwardProtocolRegistration	bool	true
tn ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
tn ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
tn ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
nl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
nl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
nl ↗.forwardServiceRegistration	bool	true
nl ↗.forwardProtocolRegistration	bool	true
nl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
nl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
relay.trafficFlowFilter.binderModule	string	“binder”
relay.trafficFlowFilter.fastForwarding	bool	true
relay.gtpUser.binderModule	string	“binder”
relay.gtpUser.localPort	int	31
relay.gtpUser.tunnelPeerPort	int	31
gtpUserX2.binderModule	string	“binder”
gtpUserX2.localPort	int	32
gtpUserX2.tunnelPeerPort	int	32

Source code¶

//
// Implements a gNodeB for a 5G network. It extends the ~eNodeB module
// by providing 5G connectivity to ~NrUe modules. It can be used in either StandAlone (SA) or
// Non-StandAlone (NSA) 5G deployments. In the former case, it is directly connected to a ~Upf
// module. In the latter case, this module can be configured as a secondary node of
// a ~eNodeB module, thus enabling E-UTRA Dual Connectivity (EN-DC).
//
module gNodeB extends eNodeB
{
    parameters:
        @networkNode();
        @display("i=device/antennatower;bgb=1500,600");
        collector.typename = default("GNodeBStatsCollector");
        gateway = default("upf"); // Change this path if the gateway node is inside a compound module
        nodeType = "GNODEB";        // DO NOT CHANGE
        cellularNic.typename = default(hasD2D ? "NrNicEnbD2D" : "NrNicEnb");
}

File: src/simu5g/nodes/gNodeB.ned