SingleCell_D2DMulticast¶

Package: simu5g.simulations.lte.networks

network SingleCell_D2DMulticast

SingleCell with its UEs split into cellular terminals (ueCell) and members of a D2D multicast group (ueD2D). The rest of the topology is the same: one eNodeB on an EPC PgwStandard, with a router and a server behind it.

Usage diagram¶

Parameters¶

Name	Type	Default value	Description
numUeCell	int	1
numUeD2D	int	0

Properties¶

Name	Value	Description
display	i=block/network2;bgb=991,558;bgi=background/budapest

Unassigned submodule parameters¶

Name	Type	Default value	Description
channelControl.pMax	double	20mW	Maximum sending power used for this network (in mW)
channelControl.sat	double	-110dBm	Signal attenuation threshold (in dBm)
channelControl.alpha	double	2	Path loss coefficient
channelControl.carrierFrequency	double	2.4GHz	Base carrier frequency of all the channels (in Hz)
channelControl.numChannels	int	1	Number of radio channels (frequencies)
routingRecorder ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
routingRecorder ↗.enabled	bool	true
routingRecorder ↗.logfile	string	“${resultdir}/${configname}-#${runnumber}.rt”
configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
configurator ↗.minLinkWeight	double	1E-3
configurator ↗.configureIsolatedNetworksSeparatly	bool	false
configurator ↗.config	xml	xml(“<config><interface hosts=’**’ address=’10.x.x.x’ netmask=’255.x.x.x’/></config>”)	XML configuration parameters for IP address assignment and adding manual routes
configurator ↗.assignAddresses	bool	true	Assign IP addresses to all interfaces in the network
configurator ↗.assignUniqueAddresses	bool	true	Avoid using the same address and raise an error if not possible
configurator ↗.assignDisjunctSubnetAddresses	bool	true	Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator ↗.addStaticRoutes	bool	true	Add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator ↗.addDefaultRoutes	bool	true	Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator ↗.addSubnetRoutes	bool	true	Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator ↗.addDirectRoutes	bool	true	Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator ↗.addRemoteRoutes	bool	true	Add routes towards remote (non-directly-connected) destinations via a gateway (used only if addStaticRoutes is true)
configurator ↗.optimizeRoutes	bool	true	Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator ↗.addManualRoutes	bool	true	Add manual routes from the XML configuration; independent of addStaticRoutes
configurator ↗.updateRoutes	bool	false	Recalculate static routes if an interface goes down/up or a carrier is lost/back
configurator ↗.dumpTopology	bool	false	Print extracted network topology to the module output
configurator ↗.dumpLinks	bool	false	Print recognized network links to the module output
configurator ↗.dumpAddresses	bool	false	Print assigned IP addresses for all interfaces to the module output
configurator ↗.dumpRoutes	bool	false	Print configured and optimized routing tables for all nodes to the module output
configurator ↗.dumpConfig	string	“”	Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
binder.blerShift	int	0
binder.maxDataRatePerRb	double	1.16Mbps
binder.printTrafficGeneratorConfig	bool	false
d2dBinder.binderModule	string	“binder”
coreControl.binderModule	string	“binder”
coreControl.bearerConfiguratorModule	string	“bearerConfigurator”
bearerConfigurator.binderModule	string	“binder”
bearerConfigurator.staticDrbs	object	[]	JSON array: [{coreNetwork, ue, drbId, profile, mappedQfis, filters, lcg, rlcMode, legs, isDefault, suppressSdapHeader, rohc, gbr, packetDelayBudget, packetErrorRate, qosPriorityLevel}, …]; see banner comment for details
bearerConfigurator.onDemandDrbs	object	[ // JSON array, staticDrbs schema minus “drbId” (and “ue” optional): bearers created when traffic first matches them; the default value lets both stack kinds run unauthored; see banner comment for details {coreNetwork: “epc”, filters: [“VoIP”], lcg: 0, rlcMode: “UM”}, {coreNetwork: “epc”, filters: [“gaming”], lcg: 2, rlcMode: “UM”}, {coreNetwork: “epc”, filters: [“VoDPacket”, “VoDFinishPacket”], lcg: 1, rlcMode: “UM”}, {coreNetwork: “epc”, isDefault: true, lcg: 3, rlcMode: “UM”}, {coreNetwork: “5gc”, isDefault: true, suppressSdapHeader: true, lcg: 3, rlcMode: “UM”} ]
bearerConfigurator.drbProfiles	object	{}	JSON map of named field groups referenced by the staticDrbs entries’ “profile” field, e.g. {voice: {rlcMode: “UM”, gbr: true, …}, …}; see banner comment
bearerConfigurator.dlQfiRules	object	[{dscpAsQfi: true}]	JSON array of downlink QFI-assignment rules [{node, filter, qfi\|dscpAsQfi}, …], delivered to the traffic flow filters at core-network tunnel entries; first match wins per site
bearerConfigurator.ulQfiRules	object	[]	JSON array of uplink QFI-assignment rules [{ue, filter, qfi\|dscpAsQfi}, …], delivered to the UEs’ QoS-flow classifiers; [] = classify nothing
bearerConfigurator.amPerThreshold	double	1e-4	rlcMode derivation: a definition whose QoS profile has packetErrorRate <= this gets “AM”, else “UM”
bearerConfigurator.lcgPriorityBounds	object	[25, 50, 75]	Lcg derivation: qosPriorityLevel < bounds[k] -> LCG k, else LCG 3; strictly ascending, one bound between each pair of adjacent LCGs
bearerConfigurator.rohcForDrbProfiles	object	[“5qi-1”, “qci-1”]	Header compression policy: definitions naming one of these profiles get “rohc: true” unless they state rohc themselves, on IP sessions; default: the voice bearers
carrierAggregation.componentCarrier.binderModule	string	“binder”
carrierAggregation.componentCarrier.carrierFrequency	double	2GHz	Carrier Frequency (GHz)
carrierAggregation.componentCarrier.numBands	int	6	Number of bands for this channel
carrierAggregation.componentCarrier.numerologyIndex	int	0	Numerology index
carrierAggregation.componentCarrier.useTdd	bool	false	TDD slot format index values in the range [0,61], according to 3GPP TS38.213 THIS IS TO BE DONE int tddSlotFormatIndex = default(-1); // -1 stands for FDD
carrierAggregation.componentCarrier.tddNumSymbolsDl	int	7
carrierAggregation.componentCarrier.tddNumSymbolsUl	int	7
server ↗.status ↗.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.status ↗.initialStatus	string	“UP”	Initial status of the network node
server ↗.environment ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.environment ↗.initStage	int	0	Initialization stage for the setup command
server ↗.environment ↗.globalNamespace	bool	false	Create new network namespaces under /var/run/netns/ (Linux only)
server ↗.environment ↗.namespace	string	“”	Name of the host OS network namespace (optional) (Linux only)
server ↗.environment ↗.setupCommand	string	“”	A host OS system command
server ↗.environment ↗.teardownCommand	string	“”	A host OS system command
server ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
server ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
server ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
server ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server ↗.pcapRecorder ↗.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
server ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server ↗.interfaceTable ↗.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.interfaceTable ↗.displayAddresses	bool	false	Whether to display IP addresses on links
server ↗.cb ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.cb ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.cb ↗.forwardServiceRegistration	bool	true
server ↗.cb ↗.forwardProtocolRegistration	bool	true
server ↗.cb ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.cb ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.cb ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server ↗.bl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.bl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.bl ↗.forwardServiceRegistration	bool	true
server ↗.bl ↗.forwardProtocolRegistration	bool	true
server ↗.bl ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.bl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.bl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server ↗.ethernet ↗.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ethernet ↗.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
server ↗.ethernet ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ethernet ↗.fcsMode	string	“declared”
server ↗.ethernet ↗.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
server ↗.ethernet ↗.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
server ↗.li ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.li ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.li ↗.forwardServiceRegistration	bool	true
server ↗.li ↗.forwardProtocolRegistration	bool	true
server ↗.li ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.li ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.li ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server ↗.lo ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.lo ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
server ↗.lo ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server ↗.lo ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server ↗.lo ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server ↗.lo ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
server ↗.lo ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
server ↗.lo ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server ↗.lo ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server ↗.lo ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server ↗.lo ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server ↗.lo ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server ↗.lo ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server ↗.lo ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server ↗.lo ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server ↗.lo ↗.lo ↗.displayStringTextFormat	string	“rcv:{numRcvdOK} snt:{numSent}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.lo ↗.lo ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.lo ↗.lo ↗.mtu	int	4470B
server ↗.wlan ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
server ↗.wlan ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server ↗.wlan ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server ↗.wlan ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server ↗.wlan ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
server ↗.wlan ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
server ↗.wlan ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server ↗.wlan ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server ↗.wlan ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server ↗.wlan ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server ↗.wlan ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server ↗.wlan ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server ↗.wlan ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server ↗.wlan ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server ↗.wlan ↗.mib ↗.displayStringTextFormat	string	“Address: {address}{ssidStr}\n{modeStr}{stationTypeStr}{qosStr}{associatedStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.agent ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.agent ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.wlan ↗.agent ↗.mibModule	string
server ↗.wlan ↗.agent ↗.activeScan	bool	true	Selects between active and passive scanning
server ↗.wlan ↗.agent ↗.channelsToScan	string	“”	List of channel numbers to scan (space delimited); empty means all channels
server ↗.wlan ↗.agent ↗.probeDelay	double	100ms	Delay before sending a probe request during active scanning
server ↗.wlan ↗.agent ↗.minChannelTime	double	150ms	Min interval to spend on a channel during active scanning
server ↗.wlan ↗.agent ↗.maxChannelTime	double	300ms	Channel time for passive scanning, and max channel time for active scanning
server ↗.wlan ↗.agent ↗.authenticationTimeout	double	5s	Timeout for the authentication procedure
server ↗.wlan ↗.agent ↗.associationTimeout	double	5s	Timeout for the association procedure
server ↗.wlan ↗.agent ↗.startingTime	double	-1s	Agent starting time.
server ↗.wlan ↗.agent ↗.defaultSsid	string	“”	List of allowed SSIDs to connect to; leave empty for no filtering
server ↗.wlan ↗.mgmt ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mgmt ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.wlan ↗.mgmt ↗.numChannels	int	1	Number of channels to scan
server ↗.wlan ↗.mgmt ↗.mibModule	string
server ↗.wlan ↗.mgmt ↗.macModule	string		The path to the MAC module
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.pendingQueueModule	string	“^.pendingQueue”
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.originatorMacDataServiceModule	string	“^.^.originatorMacDataService”
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.ackHandlerModule	string	“^.^.ackHandler”
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
server ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
server ↗.wlan ↗.mac ↗.dcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.fragmentationThreshold	int	1500B
server ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.multicastFrameBitrate	double	-1bps
server ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.responseAckFrameBitrate	double	-1bps
server ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.responseCtsFrameBitrate	double	-1bps
server ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameBitrate	double	-1bps	Fastest
server ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameBandwidth	double	nan Hz	Unspecified by default
server ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameNumSpatialStreams	int	-1	Unspecified by default
server ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.mgmtFrameBitrate	double	-1bps	Fastest
server ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.controlFrameBitrate	double	-1bps
server ↗.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.shortRetryLimit	int	7
server ↗.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.longRetryLimit	int	4
server ↗.wlan ↗.mac ↗.dcf ↗.originatorProtectionMechanism ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.originatorProtectionMechanism ↗.rateSelectionModule	string
server ↗.wlan ↗.mac ↗.dcf ↗.ackHandler ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.rateSelectionModule	string
server ↗.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.ackTimeout	double	-1s
server ↗.wlan ↗.mac ↗.dcf ↗.recipientAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.recipientAckPolicy ↗.rateSelectionModule	string
server ↗.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.rateSelectionModule	string
server ↗.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.ctsTimeout	double	-1s
server ↗.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.rtsThreshold	int	2346B
server ↗.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.rxModule	string
server ↗.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.rateSelectionModule	string
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.pendingQueueModule	string	“^.pendingQueue”
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.originatorMacDataServiceModule	string	“^.^.^.originatorMacDataService”
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.ackHandlerModule	string	“^.ackHandler”
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.ackHandler ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.txopProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.txopProcedure ↗.txopLimit	double	-1s
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.shortRetryLimit	int	7
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.longRetryLimit	int	4
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.collisionController ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.shortRetryLimit	int	7
server ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.longRetryLimit	int	4
server ↗.wlan ↗.mac ↗.hcf ↗.hcca ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.subframeNumThreshold	int	-1	Minimum number of subframes needed to compose an A-MSDU. (-1 means it won’t be checked)
server ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.aggregationLengthThreshold	int	-1	The minimum length for an aggregated payload necessary to create an A-MSDU (-1 means it won’t be checked).
server ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.maxAMsduSize	int	4065	-1 means infinity
server ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.qOsCheck	bool	true	Turns on/off the check of the presence of the QoS flag (false means off – this is needed for aggregation in DCF mode).
server ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.mpduAggregationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.fragmentationThreshold	int	1500B
server ↗.wlan ↗.mac ↗.hcf ↗.singleProtectionMechanism ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.singleProtectionMechanism ↗.rateSelectionModule	string
server ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.multicastFrameBitrate	double	-1bps
server ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseAckFrameBitrate	double	-1bps
server ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseBlockAckFrameBitrate	double	-1bps
server ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseCtsFrameBitrate	double	-1bps
server ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameBitrate	double	-1bps	Fastest
server ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameBandwidth	double	nan Hz	Unspecified by default
server ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameNumSpatialStreams	int	-1	Unspecified by default
server ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.mgmtFrameBitrate	double	-1bps	Fastest
server ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.controlFrameBitrate	double	-1bps
server ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.rateSelectionModule	string
server ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.blockAckReqThreshold	int	5
server ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.maxBlockAckPolicyFrameLength	int	1000B
server ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.blockAckTimeout	double	-1s
server ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.ackTimeout	double	-1s
server ↗.wlan ↗.mac ↗.hcf ↗.recipientAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.recipientAckPolicy ↗.rateSelectionModule	string
server ↗.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.rateSelectionModule	string
server ↗.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.ctsTimeout	double	-1s
server ↗.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.rtsThreshold	int	2346B
server ↗.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.rxModule	string
server ↗.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.rateSelectionModule	string
server ↗.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.delayedAckPolicySupported	bool	false
server ↗.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.aMsduSupported	bool	true
server ↗.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.maximumAllowedBufferSize	int	64
server ↗.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
server ↗.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.delayedAckPolicySupported	bool	false
server ↗.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.aMsduSupported	bool	true
server ↗.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.maximumAllowedBufferSize	int	64
server ↗.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
server ↗.wlan ↗.mac ↗.ds ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.ds ↗.mibModule	string
server ↗.wlan ↗.mac ↗.rx ↗.displayStringTextFormat	string	“{rxStatus}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.tx ↗.displayStringTextFormat	string	“{txFramePrefix}{txState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.wlan ↗.mac ↗.tx ↗.rxModule	string
server ↗.ppp ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ppp ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
server ↗.ppp ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server ↗.ppp ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server ↗.ppp ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server ↗.ppp ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
server ↗.ppp ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
server ↗.ppp ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server ↗.ppp ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server ↗.ppp ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server ↗.ppp ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server ↗.ppp ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server ↗.ppp ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server ↗.ppp ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server ↗.ppp ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server ↗.ppp ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ppp ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
server ↗.ppp ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
server ↗.ppp ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
server ↗.ppp ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
server ↗.ppp ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
server ↗.ppp ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ppp ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ppp ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
server ↗.ppp ↗.ppp ↗.mtu	int	4470B
server ↗.ppp ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
server ↗.ppp ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
server ↗.eth ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.eth ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
server ↗.eth ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server ↗.eth ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server ↗.eth ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server ↗.eth ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
server ↗.eth ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
server ↗.eth ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server ↗.eth ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server ↗.eth ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server ↗.eth ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server ↗.eth ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server ↗.eth ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server ↗.eth ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server ↗.eth ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server ↗.tun ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.tun ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
server ↗.tun ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server ↗.tun ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server ↗.tun ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server ↗.tun ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
server ↗.tun ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
server ↗.tun ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server ↗.tun ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server ↗.tun ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server ↗.tun ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server ↗.tun ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server ↗.tun ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server ↗.tun ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server ↗.tun ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server ↗.tun ↗.tun ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.tun ↗.tun ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.tun ↗.tun ↗.mtu	int	1500B
server ↗.virt ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.virt ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
server ↗.virt ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server ↗.virt ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server ↗.virt ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server ↗.virt ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
server ↗.virt ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
server ↗.virt ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server ↗.virt ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server ↗.virt ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server ↗.virt ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server ↗.virt ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server ↗.virt ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server ↗.virt ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server ↗.virt ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server ↗.virt ↗.tunnel ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.virt ↗.tunnel ↗.interfaceTableModule	string
server ↗.virt ↗.tunnel ↗.realInterface	string
server ↗.virt ↗.tunnel ↗.protocol	string	vlanId != -1 ? “ieee8021qctag” : “”
server ↗.virt ↗.tunnel ↗.address	string	“copy”
server ↗.virt ↗.tunnel ↗.vlanId	int	-1
server ↗.virt ↗.tunnel ↗.steal	bool	vlanId != -1
server ↗.ipv4 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.configurator ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv4 ↗.configurator ↗.routingTableModule	string
server ↗.ipv4 ↗.configurator ↗.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
server ↗.ipv4 ↗.configurator ↗.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
server ↗.ipv4 ↗.routingTable ↗.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv4 ↗.routingTable ↗.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
server ↗.ipv4 ↗.routingTable ↗.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
server ↗.ipv4 ↗.routingTable ↗.forwarding	bool	true	Turns IP forwarding on/off
server ↗.ipv4 ↗.routingTable ↗.multicastForwarding	bool	false	Turns multicast forwarding on/off
server ↗.ipv4 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
server ↗.ipv4 ↗.routingTable ↗.routingFile	string	“”	Routing table file name
server ↗.ipv4 ↗.natTable ↗.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.natTable ↗.networkProtocolModule	string	“^.ip”
server ↗.ipv4 ↗.natTable ↗.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
server ↗.ipv4 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.ipv4 ↗.up ↗.forwardServiceRegistration	bool	true
server ↗.ipv4 ↗.up ↗.forwardProtocolRegistration	bool	true
server ↗.ipv4 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.ipv4 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.ipv4 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server ↗.ipv4 ↗.igmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.igmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv4 ↗.igmp ↗.routingTableModule	string
server ↗.ipv4 ↗.igmp ↗.checksumMode	string	“declared”
server ↗.ipv4 ↗.igmp ↗.enabled	bool	true
server ↗.ipv4 ↗.igmp ↗.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
server ↗.ipv4 ↗.igmp ↗.queryInterval	double	125s
server ↗.ipv4 ↗.igmp ↗.queryResponseInterval	double	10s
server ↗.ipv4 ↗.igmp ↗.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
server ↗.ipv4 ↗.igmp ↗.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
server ↗.ipv4 ↗.igmp ↗.startupQueryInterval	double	queryInterval / 4
server ↗.ipv4 ↗.igmp ↗.startupQueryCount	int	robustnessVariable
server ↗.ipv4 ↗.igmp ↗.lastMemberQueryInterval	double	1s
server ↗.ipv4 ↗.igmp ↗.lastMemberQueryCount	int	robustnessVariable
server ↗.ipv4 ↗.igmp ↗.unsolicitedReportInterval	double	10s
server ↗.ipv4 ↗.icmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.icmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv4 ↗.icmp ↗.routingTableModule	string
server ↗.ipv4 ↗.icmp ↗.checksumMode	string	“declared”
server ↗.ipv4 ↗.icmp ↗.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
server ↗.ipv4 ↗.mp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.mp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.ipv4 ↗.mp ↗.forwardServiceRegistration	bool	true
server ↗.ipv4 ↗.mp ↗.forwardProtocolRegistration	bool	true
server ↗.ipv4 ↗.mp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.ipv4 ↗.mp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.ipv4 ↗.mp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server ↗.ipv4 ↗.ip ↗.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.ip ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv4 ↗.ip ↗.routingTableModule	string
server ↗.ipv4 ↗.ip ↗.arpModule	string
server ↗.ipv4 ↗.ip ↗.icmpModule	string
server ↗.ipv4 ↗.ip ↗.checksumMode	string	“declared”
server ↗.ipv4 ↗.ip ↗.timeToLive	int	32
server ↗.ipv4 ↗.ip ↗.multicastTimeToLive	int	32
server ↗.ipv4 ↗.ip ↗.fragmentTimeout	double	60s
server ↗.ipv4 ↗.ip ↗.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
server ↗.ipv4 ↗.ip ↗.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
server ↗.ipv4 ↗.ip ↗.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
server ↗.ipv4 ↗.ip ↗.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
server ↗.ipv4 ↗.ip ↗.maxLifetime	double	-1s	Packets older than the limit are discarded
server ↗.ipv4 ↗.arp ↗.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.arp ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv4 ↗.arp ↗.routingTableModule	string
server ↗.ipv4 ↗.arp ↗.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
server ↗.ipv4 ↗.arp ↗.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
server ↗.ipv4 ↗.arp ↗.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
server ↗.ipv4 ↗.arp ↗.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
server ↗.ipv4 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.ipsec ↗.networkProtocolModule	string	“^.ip”
server ↗.ipv4 ↗.ipsec ↗.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
server ↗.ipv4 ↗.ipsec ↗.interfaceTableModule	string
server ↗.ipv4 ↗.ipsec ↗.spdModule	string	“^.spd”
server ↗.ipv4 ↗.ipsec ↗.sadModule	string	“^.sad”
server ↗.ipv4 ↗.ipsec ↗.spdConfig	xml
server ↗.ipv4 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
server ↗.ipv4 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
server ↗.ipv4 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
server ↗.ipv4 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
server ↗.ipv4 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
server ↗.ipv4 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
server ↗.ipv4 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
server ↗.ipv4 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
server ↗.ipv4 ↗.ipsec ↗.espProtectInDelay	double	0.0s
server ↗.ipv4 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv4 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.ipv4 ↗.lp ↗.forwardServiceRegistration	bool	true
server ↗.ipv4 ↗.lp ↗.forwardProtocolRegistration	bool	true
server ↗.ipv4 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.ipv4 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.ipv4 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server ↗.ipv6 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.configurator ↗.interfaceTableModule	string
server ↗.ipv6 ↗.configurator ↗.routingTableModule	string
server ↗.ipv6 ↗.configurator ↗.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
server ↗.ipv6 ↗.configurator ↗.configureRoutingTable	bool	true
server ↗.ipv6 ↗.routingTable ↗.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv6 ↗.routingTable ↗.routes	xml	xml(“<routingTable/>”)
server ↗.ipv6 ↗.routingTable ↗.forwarding	bool	false
server ↗.ipv6 ↗.routingTable ↗.isRouter	bool	this.forwarding
server ↗.ipv6 ↗.routingTable ↗.multicastForwarding	bool	false
server ↗.ipv6 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
server ↗.ipv6 ↗.routingTable ↗.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
server ↗.ipv6 ↗.routingTable ↗.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
server ↗.ipv6 ↗.routingTable ↗.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
server ↗.ipv6 ↗.routingTable ↗.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
server ↗.ipv6 ↗.routingTable ↗.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
server ↗.ipv6 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.ipv6 ↗.up ↗.forwardServiceRegistration	bool	true
server ↗.ipv6 ↗.up ↗.forwardProtocolRegistration	bool	true
server ↗.ipv6 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.ipv6 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.ipv6 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server ↗.ipv6 ↗.icmpv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.icmpv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv6 ↗.icmpv6 ↗.checksumMode	string	“declared”
server ↗.ipv6 ↗.icmpv6 ↗.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
server ↗.ipv6 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.ipv6 ↗.lp ↗.forwardServiceRegistration	bool	true
server ↗.ipv6 ↗.lp ↗.forwardProtocolRegistration	bool	true
server ↗.ipv6 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.ipv6 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.ipv6 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server ↗.ipv6 ↗.neighbourDiscovery ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.neighbourDiscovery ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv6 ↗.neighbourDiscovery ↗.checksumMode	string	“declared”
server ↗.ipv6 ↗.neighbourDiscovery ↗.icmpv6Module	string
server ↗.ipv6 ↗.neighbourDiscovery ↗.mipv6Module	string
server ↗.ipv6 ↗.neighbourDiscovery ↗.routingTableModule	string
server ↗.ipv6 ↗.neighbourDiscovery ↗.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
server ↗.ipv6 ↗.neighbourDiscovery ↗.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
server ↗.ipv6 ↗.neighbourDiscovery ↗.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
server ↗.ipv6 ↗.neighbourDiscovery ↗.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
server ↗.ipv6 ↗.neighbourDiscovery ↗.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
server ↗.ipv6 ↗.neighbourDiscovery ↗.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
server ↗.ipv6 ↗.neighbourDiscovery ↗.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
server ↗.ipv6 ↗.neighbourDiscovery ↗.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
server ↗.ipv6 ↗.neighbourDiscovery ↗.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
server ↗.ipv6 ↗.neighbourDiscovery ↗.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
server ↗.ipv6 ↗.ipv6 ↗.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.ipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv6 ↗.ipv6 ↗.routingTableModule	string
server ↗.ipv6 ↗.ipv6 ↗.ipv6NeighbourDiscoveryModule	string
server ↗.ipv6 ↗.ipv6 ↗.icmpv6Module	string
server ↗.ipv6 ↗.ipv6 ↗.procDelay	double	0s
server ↗.ipv6 ↗.ipv6 ↗.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
server ↗.ipv6 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.ipsec ↗.interfaceTableModule	string
server ↗.ipv6 ↗.ipsec ↗.spdModule	string	“^.spd”
server ↗.ipv6 ↗.ipsec ↗.sadModule	string	“^.sad”
server ↗.ipv6 ↗.ipsec ↗.spdConfig	xml
server ↗.ipv6 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
server ↗.ipv6 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
server ↗.ipv6 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
server ↗.ipv6 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
server ↗.ipv6 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
server ↗.ipv6 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
server ↗.ipv6 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
server ↗.ipv6 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
server ↗.ipv6 ↗.ipsec ↗.espProtectInDelay	double	0.0s
server ↗.ipv6 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.mipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.mipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.ipv6 ↗.mipv6 ↗.ipv6NeighbourDiscoveryModule	string
server ↗.ipv6 ↗.mipv6 ↗.bindingUpdateListModule	string
server ↗.ipv6 ↗.mipv6 ↗.bindingCacheModule	string
server ↗.ipv6 ↗.mipv6 ↗.isHomeAgent	bool
server ↗.ipv6 ↗.mipv6 ↗.isMobileNode	bool
server ↗.ipv6 ↗.mipv6 ↗.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
server ↗.ipv6 ↗.mipv6 ↗.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
server ↗.ipv6 ↗.mipv6 ↗.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
server ↗.ipv6 ↗.buList ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.bindingCache ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.pmipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.pmipv6 ↗.interfaceTableModule	string		path to the InterfaceTable module
server ↗.ipv6 ↗.pmipv6 ↗.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
server ↗.ipv6 ↗.pmipv6 ↗.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
server ↗.ipv6 ↗.pmipv6 ↗.isMobileAccessGateway	bool	false
server ↗.ipv6 ↗.pmipv6 ↗.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
server ↗.ipv6 ↗.pmipv6 ↗.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
server ↗.ipv6 ↗.pmipv6 ↗.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
server ↗.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
server ↗.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
server ↗.ipv6 ↗.mld ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.ipv6 ↗.mld ↗.interfaceTableModule	string		path to the InterfaceTable module
server ↗.ipv6 ↗.mld ↗.routingTableModule	string		path to the Ipv6RoutingTable module
server ↗.ipv6 ↗.mld ↗.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
server ↗.ipv6 ↗.mld ↗.enabled	bool	true	when false, MLD is inert on this node (see above)
server ↗.ipv6 ↗.mld ↗.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
server ↗.ipv6 ↗.mld ↗.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
server ↗.ipv6 ↗.mld ↗.queryInterval	double	125s	querier: interval between periodic General Queries
server ↗.ipv6 ↗.mld ↗.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
server ↗.ipv6 ↗.mld ↗.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
server ↗.ipv6 ↗.mld ↗.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
server ↗.ipv6 ↗.mld ↗.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
server ↗.ipv6 ↗.mld ↗.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
server ↗.ipv6 ↗.mld ↗.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
server ↗.nl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.nl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.nl ↗.forwardServiceRegistration	bool	true
server ↗.nl ↗.forwardProtocolRegistration	bool	true
server ↗.nl ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.nl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.nl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server ↗.udp ↗.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.udp ↗.interfaceTableModule	string		The path to the InterfaceTable module
server ↗.udp ↗.checksumMode	string	“declared”
server ↗.udp ↗.defaultMulticastLoop	bool	true
server ↗.tcp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.tcp ↗.checksumMode	string	“declared”
server ↗.tcp ↗.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
server ↗.tcp ↗.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
server ↗.tcp ↗.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
server ↗.tcp ↗.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
server ↗.tcp ↗.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
server ↗.tcp ↗.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
server ↗.tcp ↗.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
server ↗.tcp ↗.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
server ↗.tcp ↗.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
server ↗.tcp ↗.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
server ↗.tcp ↗.msl	int	120s	Maximum Segment Lifetime
server ↗.tcp ↗.tcpAlgorithmClass	string	“TcpReno”
server ↗.tcp ↗.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
server ↗.tcp ↗.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
server ↗.tcp ↗.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
server ↗.tcp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
server ↗.tcp ↗.ecnWillingness	bool	false	True if willing to use ECN
server ↗.tcp ↗.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
server ↗.tcp ↗.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
server ↗.tcp ↗.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
server ↗.sctp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.sctp ↗.interfaceTableModule	string
server ↗.sctp ↗.routingTableModule	string
server ↗.sctp ↗.checksumMode	string	“declared”
server ↗.sctp ↗.numGapReports	int	3
server ↗.sctp ↗.rtoInitial	double	3s
server ↗.sctp ↗.rtoMin	double	1s
server ↗.sctp ↗.rtoMax	double	60s
server ↗.sctp ↗.rtoAlpha	double	0.125
server ↗.sctp ↗.rtoBeta	double	0.250
server ↗.sctp ↗.maxBurst	int	4
server ↗.sctp ↗.maxBurstVariant	string	“maxBurst”
server ↗.sctp ↗.initialWindow	int	0
server ↗.sctp ↗.assocMaxRetrans	int	10
server ↗.sctp ↗.pathMaxRetrans	int	5
server ↗.sctp ↗.maxInitRetrans	int	8
server ↗.sctp ↗.sackPeriod	double	200ms
server ↗.sctp ↗.sackFrequency	int	2
server ↗.sctp ↗.reactivatePrimaryPath	bool	false
server ↗.sctp ↗.sendQueueLimit	int	0
server ↗.sctp ↗.validCookieLifetime	double	10s
server ↗.sctp ↗.enableHeartbeats	bool	true
server ↗.sctp ↗.hbInterval	double	30s
server ↗.sctp ↗.sendHeartbeatsOnActivePaths	bool	false
server ↗.sctp ↗.nagleEnabled	bool	true
server ↗.sctp ↗.naglePoint	int	1468
server ↗.sctp ↗.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
server ↗.sctp ↗.fastRecoverySupported	bool	true
server ↗.sctp ↗.sctpAlgorithmClass	string	“SctpAlg”
server ↗.sctp ↗.ccModule	int	0	RFC4960=0
server ↗.sctp ↗.osbWithHeader	bool	false
server ↗.sctp ↗.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
server ↗.sctp ↗.ssModule	int	0	ROUND_ROBIN=0
server ↗.sctp ↗.arwnd	int	65535
server ↗.sctp ↗.swsLimit	int	3000	Limit for SWS
server ↗.sctp ↗.udpEncapsEnabled	bool	false
server ↗.sctp ↗.natFriendly	bool	false
server ↗.sctp ↗.bytesToAddPerRcvdChunk	int	0	For flow control
server ↗.sctp ↗.bytesToAddPerPeerChunk	int	0	For flow control
server ↗.sctp ↗.tellArwnd	bool	false	For flow control
server ↗.sctp ↗.messageAcceptLimit	int	0	For flow control
server ↗.sctp ↗.fairStart	double	0s
server ↗.sctp ↗.fairStop	double	0s
server ↗.sctp ↗.streamsToPaths	string	“”
server ↗.sctp ↗.startEndToEndDelay	int	0
server ↗.sctp ↗.stopEndToEndDelay	int	10
server ↗.sctp ↗.throughputInterval	double	1
server ↗.sctp ↗.auth	bool	false
server ↗.sctp ↗.chunks	string	“”
server ↗.sctp ↗.padding	bool	false
server ↗.sctp ↗.addIP	bool	false
server ↗.sctp ↗.addTime	double	0s
server ↗.sctp ↗.addAddress	string	“”
server ↗.sctp ↗.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
server ↗.sctp ↗.packetDrop	bool	false
server ↗.sctp ↗.sackNow	bool	false
server ↗.sctp ↗.highSpeedCC	bool	false
server ↗.sctp ↗.checkSackSeqNumber	bool	false
server ↗.sctp ↗.nrSack	bool	false
server ↗.sctp ↗.disableReneging	bool	false
server ↗.sctp ↗.gapReportLimit	int	100000000
server ↗.sctp ↗.gapListOptimizationVariant	string	“none”
server ↗.sctp ↗.smartOverfullSACKHandling	bool	false
server ↗.sctp ↗.allowQoSTracking	bool	false
server ↗.sctp ↗.qosTrackingInterval	double	1.0s
server ↗.sctp ↗.cmtSendAllVariant	string	“normal”
server ↗.sctp ↗.cmtRetransmissionVariant	string	“normal”
server ↗.sctp ↗.cmtCUCVariant	string	“normal”
server ↗.sctp ↗.cmtBufferSplitVariant	string	“none”
server ↗.sctp ↗.cmtBufferSplittingUsesOSB	bool	false
server ↗.sctp ↗.cmtUseSFR	bool	true
server ↗.sctp ↗.cmtUseDAC	bool	true
server ↗.sctp ↗.cmtUseFRC	bool	true
server ↗.sctp ↗.cmtSmartT3Reset	bool	true
server ↗.sctp ↗.cmtSmartFastRTX	bool	true
server ↗.sctp ↗.cmtSmartReneging	bool	false
server ↗.sctp ↗.cmtSlowPathRTTUpdate	bool	false
server ↗.sctp ↗.cmtChunkReschedulingVariant	string	“none”
server ↗.sctp ↗.cmtChunkReschedulingThreshold	double	0.5
server ↗.sctp ↗.cmtMovedChunksReduceCwnd	bool	true
server ↗.sctp ↗.movedChunkFastRTXFactor	double	2.0
server ↗.sctp ↗.cmtSackPath	string	“standard”
server ↗.sctp ↗.strictCwndBooking	bool	false
server ↗.sctp ↗.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
server ↗.sctp ↗.cmtCCPathGroups	string	“”
server ↗.sctp ↗.rpPathBlocking	bool	false
server ↗.sctp ↗.rpScaleBlockingTimeout	bool	false
server ↗.sctp ↗.rpMinCwnd	int	1
server ↗.quic ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.quic ↗.routingTableModule	string		Set by StandardHost.
server ↗.quic ↗.sendZeroRttTokenAsServer	bool	false
server ↗.quic ↗.congestionControl	string	“NewReno”	Sets the congestion control algorithm (NewReno or No).
server ↗.quic ↗.accurateIncreaseInNewRenoCongestionAvoidance	bool	true	For NewReno in Congestion Avoidance, if true, increases cwnd after cwnd-acked bytes; if false, increases cwnd on every acked packet by acked_bytes/cwnd.
server ↗.quic ↗.sendQueueLimit	int	64MB	Sets the limit of the send queue in bytes.
server ↗.quic ↗.sendQueueLowWaterRatio	double	.4	Defines the send queue low water mark relative to the limit.
server ↗.quic ↗.initialMaxData	int	15MB	Connection level flow control credit. Used as own and peer’s value.
server ↗.quic ↗.initialMaxStreamData	int	6MB	Stream level flow control credit for any stream (unidirectional, bidirectional local and remote). Used as own and peer’s value.
server ↗.quic ↗.maxDataFrameThreshold	double	0.5*initialMaxData	Defines when MaxDataFrame in ConnectionFlowControl will be send.
server ↗.quic ↗.maxStreamDataFrameThreshold	double	0.5*initialMaxStreamData	Defines when MaxStreamDataFrame in StreamFlowControl will be send.
server ↗.quic ↗.roundConsumedDataValue	bool	false	If true, FlowControlResponder rounds consumedData in streamRcvBuffer to the next packetSize.
server ↗.quic ↗.sendMaxDataFramesImmediately	bool	false	If true, a MAX_(STREAM)_DATA frame is sent immediately, after generation. Otherwise, sending the frame is delayed until the sending process starts due to another event.
server ↗.quic ↗.bundleAckForNonAckElicitingPackets	bool	false	If true, bundles ack for non-ack-eliciting packets in an outgoing packet.
server ↗.quic ↗.numReceivedAckElicitingsBeforeAck	int	2	Number of ack eliciting packets a receiver waits for, before it sends an ACK, immediately.
server ↗.quic ↗.useIBit	bool	false	If true, an ACK frame is sent immediately upon an ack-eliciting packet with the I-Bit set.
server ↗.quic ↗.useDplpmtud	bool	false	If true, uses DPLPMTUD (RFC8899) to determine the PMTU.
server ↗.quic ↗.maxPmtu	int	65535B	With useDplpmtud, it is used as upper limit for the PMTU search. Without useDplpmtud, the PMTU is set to the minimum of the MTU of the outgoing interface and this value.
server ↗.quic ↗.dplpmtudMinPmtu	int	0	Specifies the minimum PMTU to use (if 0, it uses 1200 B for IPv4 or 1280 B for IPv6 as minimum PMTU).
server ↗.quic ↗.dplpmtudMaxProbes	int	3	Specifies the number of probe packet sent for one candidate before given up.
server ↗.quic ↗.dplpmtudUsePtb	bool	true	If true, uses ICMP Packet Too Big (PTB) messages for DPLPMTUD.
server ↗.quic ↗.dplpmtudCandidateSequence	string	“OptBinary”	Specifies the sequence of candidates used for the search algorithm of DPLPMTUD (Up, Down, OptUp, Binary, OptBinary, Jump).
server ↗.quic ↗.skipPacketNumberForDplpmtudProbePackets	bool	false	Specifies whether to skip a packet number for a DPLPMTUD probe packet in order to avoid ack delay.
server ↗.quic ↗.useCwndForParallelProbes	int	0	If 0, no parallel probe packets; if 1, uses the availbale cwnd to send additional probe packets and if 2 prefers to send probe packets over other packets.
server ↗.quic ↗.sendDataDuringInitalDplpmtudBase	bool	true	If false, waits for DPLPMTUD switching initially to SEARCH before start sending application data.
server ↗.quic ↗.dplpmtudUsePmtuValidator	bool	true	If true, activates the PMTU Validator that trys to detect when the current PMTU estimation is larger than the actual PMTU.
server ↗.quic ↗.pmtuValidatorLostPacketsThreshold	int	2	Specifies the number of lost data packets before assuming a decreased PMTU.
server ↗.quic ↗.pmtuValidatorTimeThreshold	double	-1s	Specifies the time threshold between two lost packets. If negative, pmtuValidatorSrttFactorThreshold is used instead.
server ↗.quic ↗.pmtuValidatorSrttFactorThreshold	int	1	If pmtuValidatorTimeThreshold is negative, this number multiplied by SRTT is used instead.
server ↗.quic ↗.pmtuValidatorInvalidOnPersistentCongestion	int	1	If 0, disabled. If 1, the PMTU validator uses persistent congeation as signal for a decreased PMTU. If 2, only two consecutive persisten congestions used as signal. If 3, …
server ↗.quic ↗.reducePacketTimeThreshold	double	0s	Specifies after which time with no acks, packets with reduced size are sent. If zero, packet size reduction is disabled. If negative, reducePacketPtoFactorThreshold is used instead.
server ↗.quic ↗.reducePacketPtoFactorThreshold	int	3	If reducePacketTimeThreshold is negative, this number multiplied by PTO is used instead.
server ↗.tn ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.tn ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.tn ↗.forwardServiceRegistration	bool	true
server ↗.tn ↗.forwardProtocolRegistration	bool	true
server ↗.tn ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.tn ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.tn ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server ↗.at ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server ↗.at ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
server ↗.at ↗.forwardServiceRegistration	bool	true
server ↗.at ↗.forwardProtocolRegistration	bool	true
server ↗.at ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server ↗.at ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server ↗.at ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.status ↗.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.status ↗.initialStatus	string	“UP”	Initial status of the network node
router ↗.environment ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.environment ↗.initStage	int	0	Initialization stage for the setup command
router ↗.environment ↗.globalNamespace	bool	false	Create new network namespaces under /var/run/netns/ (Linux only)
router ↗.environment ↗.namespace	string	“”	Name of the host OS network namespace (optional) (Linux only)
router ↗.environment ↗.setupCommand	string	“”	A host OS system command
router ↗.environment ↗.teardownCommand	string	“”	A host OS system command
router ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
router ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
router ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
router ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
router ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
router ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
router ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
router ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
router ↗.pcapRecorder ↗.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
router ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
router ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
router ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
router ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
router ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
router ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router ↗.interfaceTable ↗.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.interfaceTable ↗.displayAddresses	bool	false	Whether to display IP addresses on links
router ↗.cb ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.cb ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.cb ↗.forwardServiceRegistration	bool	true
router ↗.cb ↗.forwardProtocolRegistration	bool	true
router ↗.cb ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.cb ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.cb ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.bl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.bl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.bl ↗.forwardServiceRegistration	bool	true
router ↗.bl ↗.forwardProtocolRegistration	bool	true
router ↗.bl ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.bl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.bl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.ethernet ↗.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ethernet ↗.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
router ↗.ethernet ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ethernet ↗.fcsMode	string	“declared”
router ↗.ethernet ↗.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
router ↗.ethernet ↗.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
router ↗.li ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.li ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.li ↗.forwardServiceRegistration	bool	true
router ↗.li ↗.forwardProtocolRegistration	bool	true
router ↗.li ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.li ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.li ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.lo ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.lo ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
router ↗.lo ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
router ↗.lo ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
router ↗.lo ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
router ↗.lo ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
router ↗.lo ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
router ↗.lo ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
router ↗.lo ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
router ↗.lo ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
router ↗.lo ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
router ↗.lo ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
router ↗.lo ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
router ↗.lo ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
router ↗.lo ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router ↗.lo ↗.lo ↗.displayStringTextFormat	string	“rcv:{numRcvdOK} snt:{numSent}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.lo ↗.lo ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.lo ↗.lo ↗.mtu	int	4470B
router ↗.wlan ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
router ↗.wlan ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
router ↗.wlan ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
router ↗.wlan ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
router ↗.wlan ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
router ↗.wlan ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
router ↗.wlan ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
router ↗.wlan ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
router ↗.wlan ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
router ↗.wlan ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
router ↗.wlan ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
router ↗.wlan ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
router ↗.wlan ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
router ↗.wlan ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router ↗.wlan ↗.mib ↗.displayStringTextFormat	string	“Address: {address}{ssidStr}\n{modeStr}{stationTypeStr}{qosStr}{associatedStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.agent ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.agent ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.wlan ↗.agent ↗.mibModule	string
router ↗.wlan ↗.agent ↗.activeScan	bool	true	Selects between active and passive scanning
router ↗.wlan ↗.agent ↗.channelsToScan	string	“”	List of channel numbers to scan (space delimited); empty means all channels
router ↗.wlan ↗.agent ↗.probeDelay	double	100ms	Delay before sending a probe request during active scanning
router ↗.wlan ↗.agent ↗.minChannelTime	double	150ms	Min interval to spend on a channel during active scanning
router ↗.wlan ↗.agent ↗.maxChannelTime	double	300ms	Channel time for passive scanning, and max channel time for active scanning
router ↗.wlan ↗.agent ↗.authenticationTimeout	double	5s	Timeout for the authentication procedure
router ↗.wlan ↗.agent ↗.associationTimeout	double	5s	Timeout for the association procedure
router ↗.wlan ↗.agent ↗.startingTime	double	-1s	Agent starting time.
router ↗.wlan ↗.agent ↗.defaultSsid	string	“”	List of allowed SSIDs to connect to; leave empty for no filtering
router ↗.wlan ↗.mgmt ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mgmt ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.wlan ↗.mgmt ↗.numChannels	int	1	Number of channels to scan
router ↗.wlan ↗.mgmt ↗.mibModule	string
router ↗.wlan ↗.mgmt ↗.macModule	string		The path to the MAC module
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.pendingQueueModule	string	“^.pendingQueue”
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.originatorMacDataServiceModule	string	“^.^.originatorMacDataService”
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.ackHandlerModule	string	“^.^.ackHandler”
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
router ↗.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
router ↗.wlan ↗.mac ↗.dcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.fragmentationThreshold	int	1500B
router ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.multicastFrameBitrate	double	-1bps
router ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.responseAckFrameBitrate	double	-1bps
router ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.responseCtsFrameBitrate	double	-1bps
router ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameBitrate	double	-1bps	Fastest
router ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameBandwidth	double	nan Hz	Unspecified by default
router ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameNumSpatialStreams	int	-1	Unspecified by default
router ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.mgmtFrameBitrate	double	-1bps	Fastest
router ↗.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.controlFrameBitrate	double	-1bps
router ↗.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.shortRetryLimit	int	7
router ↗.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.longRetryLimit	int	4
router ↗.wlan ↗.mac ↗.dcf ↗.originatorProtectionMechanism ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.originatorProtectionMechanism ↗.rateSelectionModule	string
router ↗.wlan ↗.mac ↗.dcf ↗.ackHandler ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.rateSelectionModule	string
router ↗.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.ackTimeout	double	-1s
router ↗.wlan ↗.mac ↗.dcf ↗.recipientAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.recipientAckPolicy ↗.rateSelectionModule	string
router ↗.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.rateSelectionModule	string
router ↗.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.ctsTimeout	double	-1s
router ↗.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.rtsThreshold	int	2346B
router ↗.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.rxModule	string
router ↗.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.rateSelectionModule	string
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.pendingQueueModule	string	“^.pendingQueue”
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.originatorMacDataServiceModule	string	“^.^.^.originatorMacDataService”
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.ackHandlerModule	string	“^.ackHandler”
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.ackHandler ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.txopProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.txopProcedure ↗.txopLimit	double	-1s
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.shortRetryLimit	int	7
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.longRetryLimit	int	4
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.collisionController ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.shortRetryLimit	int	7
router ↗.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.longRetryLimit	int	4
router ↗.wlan ↗.mac ↗.hcf ↗.hcca ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.subframeNumThreshold	int	-1	Minimum number of subframes needed to compose an A-MSDU. (-1 means it won’t be checked)
router ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.aggregationLengthThreshold	int	-1	The minimum length for an aggregated payload necessary to create an A-MSDU (-1 means it won’t be checked).
router ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.maxAMsduSize	int	4065	-1 means infinity
router ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.qOsCheck	bool	true	Turns on/off the check of the presence of the QoS flag (false means off – this is needed for aggregation in DCF mode).
router ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.mpduAggregationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.fragmentationThreshold	int	1500B
router ↗.wlan ↗.mac ↗.hcf ↗.singleProtectionMechanism ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.singleProtectionMechanism ↗.rateSelectionModule	string
router ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.multicastFrameBitrate	double	-1bps
router ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseAckFrameBitrate	double	-1bps
router ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseBlockAckFrameBitrate	double	-1bps
router ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseCtsFrameBitrate	double	-1bps
router ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameBitrate	double	-1bps	Fastest
router ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameBandwidth	double	nan Hz	Unspecified by default
router ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameNumSpatialStreams	int	-1	Unspecified by default
router ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.mgmtFrameBitrate	double	-1bps	Fastest
router ↗.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.controlFrameBitrate	double	-1bps
router ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.rateSelectionModule	string
router ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.blockAckReqThreshold	int	5
router ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.maxBlockAckPolicyFrameLength	int	1000B
router ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.blockAckTimeout	double	-1s
router ↗.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.ackTimeout	double	-1s
router ↗.wlan ↗.mac ↗.hcf ↗.recipientAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.recipientAckPolicy ↗.rateSelectionModule	string
router ↗.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.rateSelectionModule	string
router ↗.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.ctsTimeout	double	-1s
router ↗.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.rtsThreshold	int	2346B
router ↗.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.rxModule	string
router ↗.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.rateSelectionModule	string
router ↗.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.delayedAckPolicySupported	bool	false
router ↗.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.aMsduSupported	bool	true
router ↗.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.maximumAllowedBufferSize	int	64
router ↗.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
router ↗.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.delayedAckPolicySupported	bool	false
router ↗.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.aMsduSupported	bool	true
router ↗.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.maximumAllowedBufferSize	int	64
router ↗.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
router ↗.wlan ↗.mac ↗.ds ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.ds ↗.mibModule	string
router ↗.wlan ↗.mac ↗.rx ↗.displayStringTextFormat	string	“{rxStatus}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.tx ↗.displayStringTextFormat	string	“{txFramePrefix}{txState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.wlan ↗.mac ↗.tx ↗.rxModule	string
router ↗.ppp ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ppp ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
router ↗.ppp ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
router ↗.ppp ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
router ↗.ppp ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
router ↗.ppp ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
router ↗.ppp ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
router ↗.ppp ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
router ↗.ppp ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
router ↗.ppp ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
router ↗.ppp ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
router ↗.ppp ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
router ↗.ppp ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
router ↗.ppp ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
router ↗.ppp ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router ↗.ppp ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ppp ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
router ↗.ppp ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
router ↗.ppp ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
router ↗.ppp ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
router ↗.ppp ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
router ↗.ppp ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ppp ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ppp ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
router ↗.ppp ↗.ppp ↗.mtu	int	4470B
router ↗.ppp ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
router ↗.ppp ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
router ↗.eth ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eth ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
router ↗.eth ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
router ↗.eth ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
router ↗.eth ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
router ↗.eth ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
router ↗.eth ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
router ↗.eth ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
router ↗.eth ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
router ↗.eth ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
router ↗.eth ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
router ↗.eth ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
router ↗.eth ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
router ↗.eth ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
router ↗.eth ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router ↗.tun ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.tun ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
router ↗.tun ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
router ↗.tun ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
router ↗.tun ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
router ↗.tun ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
router ↗.tun ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
router ↗.tun ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
router ↗.tun ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
router ↗.tun ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
router ↗.tun ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
router ↗.tun ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
router ↗.tun ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
router ↗.tun ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
router ↗.tun ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router ↗.tun ↗.tun ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.tun ↗.tun ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.tun ↗.tun ↗.mtu	int	1500B
router ↗.virt ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.virt ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
router ↗.virt ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
router ↗.virt ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
router ↗.virt ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
router ↗.virt ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
router ↗.virt ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
router ↗.virt ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
router ↗.virt ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
router ↗.virt ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
router ↗.virt ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
router ↗.virt ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
router ↗.virt ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
router ↗.virt ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
router ↗.virt ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
router ↗.virt ↗.tunnel ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.virt ↗.tunnel ↗.interfaceTableModule	string
router ↗.virt ↗.tunnel ↗.realInterface	string
router ↗.virt ↗.tunnel ↗.protocol	string	vlanId != -1 ? “ieee8021qctag” : “”
router ↗.virt ↗.tunnel ↗.address	string	“copy”
router ↗.virt ↗.tunnel ↗.vlanId	int	-1
router ↗.virt ↗.tunnel ↗.steal	bool	vlanId != -1
router ↗.ipv4 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.configurator ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv4 ↗.configurator ↗.routingTableModule	string
router ↗.ipv4 ↗.configurator ↗.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
router ↗.ipv4 ↗.configurator ↗.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
router ↗.ipv4 ↗.routingTable ↗.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv4 ↗.routingTable ↗.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
router ↗.ipv4 ↗.routingTable ↗.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
router ↗.ipv4 ↗.routingTable ↗.forwarding	bool	true	Turns IP forwarding on/off
router ↗.ipv4 ↗.routingTable ↗.multicastForwarding	bool	false	Turns multicast forwarding on/off
router ↗.ipv4 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
router ↗.ipv4 ↗.routingTable ↗.routingFile	string	“”	Routing table file name
router ↗.ipv4 ↗.natTable ↗.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.natTable ↗.networkProtocolModule	string	“^.ip”
router ↗.ipv4 ↗.natTable ↗.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
router ↗.ipv4 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.ipv4 ↗.up ↗.forwardServiceRegistration	bool	true
router ↗.ipv4 ↗.up ↗.forwardProtocolRegistration	bool	true
router ↗.ipv4 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.ipv4 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.ipv4 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.ipv4 ↗.igmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.igmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv4 ↗.igmp ↗.routingTableModule	string
router ↗.ipv4 ↗.igmp ↗.checksumMode	string	“declared”
router ↗.ipv4 ↗.igmp ↗.enabled	bool	true
router ↗.ipv4 ↗.igmp ↗.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
router ↗.ipv4 ↗.igmp ↗.queryInterval	double	125s
router ↗.ipv4 ↗.igmp ↗.queryResponseInterval	double	10s
router ↗.ipv4 ↗.igmp ↗.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
router ↗.ipv4 ↗.igmp ↗.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
router ↗.ipv4 ↗.igmp ↗.startupQueryInterval	double	queryInterval / 4
router ↗.ipv4 ↗.igmp ↗.startupQueryCount	int	robustnessVariable
router ↗.ipv4 ↗.igmp ↗.lastMemberQueryInterval	double	1s
router ↗.ipv4 ↗.igmp ↗.lastMemberQueryCount	int	robustnessVariable
router ↗.ipv4 ↗.igmp ↗.unsolicitedReportInterval	double	10s
router ↗.ipv4 ↗.icmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.icmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv4 ↗.icmp ↗.routingTableModule	string
router ↗.ipv4 ↗.icmp ↗.checksumMode	string	“declared”
router ↗.ipv4 ↗.icmp ↗.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
router ↗.ipv4 ↗.mp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.mp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.ipv4 ↗.mp ↗.forwardServiceRegistration	bool	true
router ↗.ipv4 ↗.mp ↗.forwardProtocolRegistration	bool	true
router ↗.ipv4 ↗.mp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.ipv4 ↗.mp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.ipv4 ↗.mp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.ipv4 ↗.ip ↗.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.ip ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv4 ↗.ip ↗.routingTableModule	string
router ↗.ipv4 ↗.ip ↗.arpModule	string
router ↗.ipv4 ↗.ip ↗.icmpModule	string
router ↗.ipv4 ↗.ip ↗.checksumMode	string	“declared”
router ↗.ipv4 ↗.ip ↗.timeToLive	int	32
router ↗.ipv4 ↗.ip ↗.multicastTimeToLive	int	32
router ↗.ipv4 ↗.ip ↗.fragmentTimeout	double	60s
router ↗.ipv4 ↗.ip ↗.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
router ↗.ipv4 ↗.ip ↗.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
router ↗.ipv4 ↗.ip ↗.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
router ↗.ipv4 ↗.ip ↗.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
router ↗.ipv4 ↗.ip ↗.maxLifetime	double	-1s	Packets older than the limit are discarded
router ↗.ipv4 ↗.arp ↗.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.arp ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv4 ↗.arp ↗.routingTableModule	string
router ↗.ipv4 ↗.arp ↗.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
router ↗.ipv4 ↗.arp ↗.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
router ↗.ipv4 ↗.arp ↗.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
router ↗.ipv4 ↗.arp ↗.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
router ↗.ipv4 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.ipsec ↗.networkProtocolModule	string	“^.ip”
router ↗.ipv4 ↗.ipsec ↗.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
router ↗.ipv4 ↗.ipsec ↗.interfaceTableModule	string
router ↗.ipv4 ↗.ipsec ↗.spdModule	string	“^.spd”
router ↗.ipv4 ↗.ipsec ↗.sadModule	string	“^.sad”
router ↗.ipv4 ↗.ipsec ↗.spdConfig	xml
router ↗.ipv4 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
router ↗.ipv4 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
router ↗.ipv4 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
router ↗.ipv4 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
router ↗.ipv4 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
router ↗.ipv4 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
router ↗.ipv4 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
router ↗.ipv4 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
router ↗.ipv4 ↗.ipsec ↗.espProtectInDelay	double	0.0s
router ↗.ipv4 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv4 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.ipv4 ↗.lp ↗.forwardServiceRegistration	bool	true
router ↗.ipv4 ↗.lp ↗.forwardProtocolRegistration	bool	true
router ↗.ipv4 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.ipv4 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.ipv4 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.ipv6 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.configurator ↗.interfaceTableModule	string
router ↗.ipv6 ↗.configurator ↗.routingTableModule	string
router ↗.ipv6 ↗.configurator ↗.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
router ↗.ipv6 ↗.configurator ↗.configureRoutingTable	bool	true
router ↗.ipv6 ↗.routingTable ↗.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv6 ↗.routingTable ↗.routes	xml	xml(“<routingTable/>”)
router ↗.ipv6 ↗.routingTable ↗.forwarding	bool	false
router ↗.ipv6 ↗.routingTable ↗.isRouter	bool	this.forwarding
router ↗.ipv6 ↗.routingTable ↗.multicastForwarding	bool	false
router ↗.ipv6 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
router ↗.ipv6 ↗.routingTable ↗.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
router ↗.ipv6 ↗.routingTable ↗.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
router ↗.ipv6 ↗.routingTable ↗.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
router ↗.ipv6 ↗.routingTable ↗.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
router ↗.ipv6 ↗.routingTable ↗.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
router ↗.ipv6 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.ipv6 ↗.up ↗.forwardServiceRegistration	bool	true
router ↗.ipv6 ↗.up ↗.forwardProtocolRegistration	bool	true
router ↗.ipv6 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.ipv6 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.ipv6 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.ipv6 ↗.icmpv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.icmpv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv6 ↗.icmpv6 ↗.checksumMode	string	“declared”
router ↗.ipv6 ↗.icmpv6 ↗.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
router ↗.ipv6 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.ipv6 ↗.lp ↗.forwardServiceRegistration	bool	true
router ↗.ipv6 ↗.lp ↗.forwardProtocolRegistration	bool	true
router ↗.ipv6 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.ipv6 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.ipv6 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.ipv6 ↗.neighbourDiscovery ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.neighbourDiscovery ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv6 ↗.neighbourDiscovery ↗.checksumMode	string	“declared”
router ↗.ipv6 ↗.neighbourDiscovery ↗.icmpv6Module	string
router ↗.ipv6 ↗.neighbourDiscovery ↗.mipv6Module	string
router ↗.ipv6 ↗.neighbourDiscovery ↗.routingTableModule	string
router ↗.ipv6 ↗.neighbourDiscovery ↗.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
router ↗.ipv6 ↗.neighbourDiscovery ↗.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
router ↗.ipv6 ↗.neighbourDiscovery ↗.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
router ↗.ipv6 ↗.neighbourDiscovery ↗.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
router ↗.ipv6 ↗.neighbourDiscovery ↗.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
router ↗.ipv6 ↗.neighbourDiscovery ↗.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
router ↗.ipv6 ↗.neighbourDiscovery ↗.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
router ↗.ipv6 ↗.neighbourDiscovery ↗.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
router ↗.ipv6 ↗.neighbourDiscovery ↗.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
router ↗.ipv6 ↗.neighbourDiscovery ↗.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
router ↗.ipv6 ↗.ipv6 ↗.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.ipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv6 ↗.ipv6 ↗.routingTableModule	string
router ↗.ipv6 ↗.ipv6 ↗.ipv6NeighbourDiscoveryModule	string
router ↗.ipv6 ↗.ipv6 ↗.icmpv6Module	string
router ↗.ipv6 ↗.ipv6 ↗.procDelay	double	0s
router ↗.ipv6 ↗.ipv6 ↗.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
router ↗.ipv6 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.ipsec ↗.interfaceTableModule	string
router ↗.ipv6 ↗.ipsec ↗.spdModule	string	“^.spd”
router ↗.ipv6 ↗.ipsec ↗.sadModule	string	“^.sad”
router ↗.ipv6 ↗.ipsec ↗.spdConfig	xml
router ↗.ipv6 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
router ↗.ipv6 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
router ↗.ipv6 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
router ↗.ipv6 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
router ↗.ipv6 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
router ↗.ipv6 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
router ↗.ipv6 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
router ↗.ipv6 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
router ↗.ipv6 ↗.ipsec ↗.espProtectInDelay	double	0.0s
router ↗.ipv6 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.mipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.mipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.ipv6 ↗.mipv6 ↗.ipv6NeighbourDiscoveryModule	string
router ↗.ipv6 ↗.mipv6 ↗.bindingUpdateListModule	string
router ↗.ipv6 ↗.mipv6 ↗.bindingCacheModule	string
router ↗.ipv6 ↗.mipv6 ↗.isHomeAgent	bool
router ↗.ipv6 ↗.mipv6 ↗.isMobileNode	bool
router ↗.ipv6 ↗.mipv6 ↗.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
router ↗.ipv6 ↗.mipv6 ↗.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
router ↗.ipv6 ↗.mipv6 ↗.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
router ↗.ipv6 ↗.buList ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.bindingCache ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.pmipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.pmipv6 ↗.interfaceTableModule	string		path to the InterfaceTable module
router ↗.ipv6 ↗.pmipv6 ↗.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
router ↗.ipv6 ↗.pmipv6 ↗.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
router ↗.ipv6 ↗.pmipv6 ↗.isMobileAccessGateway	bool	false
router ↗.ipv6 ↗.pmipv6 ↗.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
router ↗.ipv6 ↗.pmipv6 ↗.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
router ↗.ipv6 ↗.pmipv6 ↗.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
router ↗.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
router ↗.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
router ↗.ipv6 ↗.mld ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ipv6 ↗.mld ↗.interfaceTableModule	string		path to the InterfaceTable module
router ↗.ipv6 ↗.mld ↗.routingTableModule	string		path to the Ipv6RoutingTable module
router ↗.ipv6 ↗.mld ↗.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
router ↗.ipv6 ↗.mld ↗.enabled	bool	true	when false, MLD is inert on this node (see above)
router ↗.ipv6 ↗.mld ↗.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
router ↗.ipv6 ↗.mld ↗.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
router ↗.ipv6 ↗.mld ↗.queryInterval	double	125s	querier: interval between periodic General Queries
router ↗.ipv6 ↗.mld ↗.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
router ↗.ipv6 ↗.mld ↗.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
router ↗.ipv6 ↗.mld ↗.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
router ↗.ipv6 ↗.mld ↗.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
router ↗.ipv6 ↗.mld ↗.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
router ↗.ipv6 ↗.mld ↗.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
router ↗.nl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.nl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.nl ↗.forwardServiceRegistration	bool	true
router ↗.nl ↗.forwardProtocolRegistration	bool	true
router ↗.nl ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.nl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.nl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.udp ↗.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.udp ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.udp ↗.checksumMode	string	“declared”
router ↗.udp ↗.defaultMulticastLoop	bool	true
router ↗.tcp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.tcp ↗.checksumMode	string	“declared”
router ↗.tcp ↗.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
router ↗.tcp ↗.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
router ↗.tcp ↗.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
router ↗.tcp ↗.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
router ↗.tcp ↗.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
router ↗.tcp ↗.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
router ↗.tcp ↗.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
router ↗.tcp ↗.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
router ↗.tcp ↗.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
router ↗.tcp ↗.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
router ↗.tcp ↗.msl	int	120s	Maximum Segment Lifetime
router ↗.tcp ↗.tcpAlgorithmClass	string	“TcpReno”
router ↗.tcp ↗.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
router ↗.tcp ↗.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
router ↗.tcp ↗.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
router ↗.tcp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
router ↗.tcp ↗.ecnWillingness	bool	false	True if willing to use ECN
router ↗.tcp ↗.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
router ↗.tcp ↗.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
router ↗.tcp ↗.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
router ↗.sctp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.sctp ↗.interfaceTableModule	string
router ↗.sctp ↗.routingTableModule	string
router ↗.sctp ↗.checksumMode	string	“declared”
router ↗.sctp ↗.numGapReports	int	3
router ↗.sctp ↗.rtoInitial	double	3s
router ↗.sctp ↗.rtoMin	double	1s
router ↗.sctp ↗.rtoMax	double	60s
router ↗.sctp ↗.rtoAlpha	double	0.125
router ↗.sctp ↗.rtoBeta	double	0.250
router ↗.sctp ↗.maxBurst	int	4
router ↗.sctp ↗.maxBurstVariant	string	“maxBurst”
router ↗.sctp ↗.initialWindow	int	0
router ↗.sctp ↗.assocMaxRetrans	int	10
router ↗.sctp ↗.pathMaxRetrans	int	5
router ↗.sctp ↗.maxInitRetrans	int	8
router ↗.sctp ↗.sackPeriod	double	200ms
router ↗.sctp ↗.sackFrequency	int	2
router ↗.sctp ↗.reactivatePrimaryPath	bool	false
router ↗.sctp ↗.sendQueueLimit	int	0
router ↗.sctp ↗.validCookieLifetime	double	10s
router ↗.sctp ↗.enableHeartbeats	bool	true
router ↗.sctp ↗.hbInterval	double	30s
router ↗.sctp ↗.sendHeartbeatsOnActivePaths	bool	false
router ↗.sctp ↗.nagleEnabled	bool	true
router ↗.sctp ↗.naglePoint	int	1468
router ↗.sctp ↗.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
router ↗.sctp ↗.fastRecoverySupported	bool	true
router ↗.sctp ↗.sctpAlgorithmClass	string	“SctpAlg”
router ↗.sctp ↗.ccModule	int	0	RFC4960=0
router ↗.sctp ↗.osbWithHeader	bool	false
router ↗.sctp ↗.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
router ↗.sctp ↗.ssModule	int	0	ROUND_ROBIN=0
router ↗.sctp ↗.arwnd	int	65535
router ↗.sctp ↗.swsLimit	int	3000	Limit for SWS
router ↗.sctp ↗.udpEncapsEnabled	bool	false
router ↗.sctp ↗.natFriendly	bool	false
router ↗.sctp ↗.bytesToAddPerRcvdChunk	int	0	For flow control
router ↗.sctp ↗.bytesToAddPerPeerChunk	int	0	For flow control
router ↗.sctp ↗.tellArwnd	bool	false	For flow control
router ↗.sctp ↗.messageAcceptLimit	int	0	For flow control
router ↗.sctp ↗.fairStart	double	0s
router ↗.sctp ↗.fairStop	double	0s
router ↗.sctp ↗.streamsToPaths	string	“”
router ↗.sctp ↗.startEndToEndDelay	int	0
router ↗.sctp ↗.stopEndToEndDelay	int	10
router ↗.sctp ↗.throughputInterval	double	1
router ↗.sctp ↗.auth	bool	false
router ↗.sctp ↗.chunks	string	“”
router ↗.sctp ↗.padding	bool	false
router ↗.sctp ↗.addIP	bool	false
router ↗.sctp ↗.addTime	double	0s
router ↗.sctp ↗.addAddress	string	“”
router ↗.sctp ↗.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
router ↗.sctp ↗.packetDrop	bool	false
router ↗.sctp ↗.sackNow	bool	false
router ↗.sctp ↗.highSpeedCC	bool	false
router ↗.sctp ↗.checkSackSeqNumber	bool	false
router ↗.sctp ↗.nrSack	bool	false
router ↗.sctp ↗.disableReneging	bool	false
router ↗.sctp ↗.gapReportLimit	int	100000000
router ↗.sctp ↗.gapListOptimizationVariant	string	“none”
router ↗.sctp ↗.smartOverfullSACKHandling	bool	false
router ↗.sctp ↗.allowQoSTracking	bool	false
router ↗.sctp ↗.qosTrackingInterval	double	1.0s
router ↗.sctp ↗.cmtSendAllVariant	string	“normal”
router ↗.sctp ↗.cmtRetransmissionVariant	string	“normal”
router ↗.sctp ↗.cmtCUCVariant	string	“normal”
router ↗.sctp ↗.cmtBufferSplitVariant	string	“none”
router ↗.sctp ↗.cmtBufferSplittingUsesOSB	bool	false
router ↗.sctp ↗.cmtUseSFR	bool	true
router ↗.sctp ↗.cmtUseDAC	bool	true
router ↗.sctp ↗.cmtUseFRC	bool	true
router ↗.sctp ↗.cmtSmartT3Reset	bool	true
router ↗.sctp ↗.cmtSmartFastRTX	bool	true
router ↗.sctp ↗.cmtSmartReneging	bool	false
router ↗.sctp ↗.cmtSlowPathRTTUpdate	bool	false
router ↗.sctp ↗.cmtChunkReschedulingVariant	string	“none”
router ↗.sctp ↗.cmtChunkReschedulingThreshold	double	0.5
router ↗.sctp ↗.cmtMovedChunksReduceCwnd	bool	true
router ↗.sctp ↗.movedChunkFastRTXFactor	double	2.0
router ↗.sctp ↗.cmtSackPath	string	“standard”
router ↗.sctp ↗.strictCwndBooking	bool	false
router ↗.sctp ↗.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
router ↗.sctp ↗.cmtCCPathGroups	string	“”
router ↗.sctp ↗.rpPathBlocking	bool	false
router ↗.sctp ↗.rpScaleBlockingTimeout	bool	false
router ↗.sctp ↗.rpMinCwnd	int	1
router ↗.quic ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.quic ↗.routingTableModule	string		Set by StandardHost.
router ↗.quic ↗.sendZeroRttTokenAsServer	bool	false
router ↗.quic ↗.congestionControl	string	“NewReno”	Sets the congestion control algorithm (NewReno or No).
router ↗.quic ↗.accurateIncreaseInNewRenoCongestionAvoidance	bool	true	For NewReno in Congestion Avoidance, if true, increases cwnd after cwnd-acked bytes; if false, increases cwnd on every acked packet by acked_bytes/cwnd.
router ↗.quic ↗.sendQueueLimit	int	64MB	Sets the limit of the send queue in bytes.
router ↗.quic ↗.sendQueueLowWaterRatio	double	.4	Defines the send queue low water mark relative to the limit.
router ↗.quic ↗.initialMaxData	int	15MB	Connection level flow control credit. Used as own and peer’s value.
router ↗.quic ↗.initialMaxStreamData	int	6MB	Stream level flow control credit for any stream (unidirectional, bidirectional local and remote). Used as own and peer’s value.
router ↗.quic ↗.maxDataFrameThreshold	double	0.5*initialMaxData	Defines when MaxDataFrame in ConnectionFlowControl will be send.
router ↗.quic ↗.maxStreamDataFrameThreshold	double	0.5*initialMaxStreamData	Defines when MaxStreamDataFrame in StreamFlowControl will be send.
router ↗.quic ↗.roundConsumedDataValue	bool	false	If true, FlowControlResponder rounds consumedData in streamRcvBuffer to the next packetSize.
router ↗.quic ↗.sendMaxDataFramesImmediately	bool	false	If true, a MAX_(STREAM)_DATA frame is sent immediately, after generation. Otherwise, sending the frame is delayed until the sending process starts due to another event.
router ↗.quic ↗.bundleAckForNonAckElicitingPackets	bool	false	If true, bundles ack for non-ack-eliciting packets in an outgoing packet.
router ↗.quic ↗.numReceivedAckElicitingsBeforeAck	int	2	Number of ack eliciting packets a receiver waits for, before it sends an ACK, immediately.
router ↗.quic ↗.useIBit	bool	false	If true, an ACK frame is sent immediately upon an ack-eliciting packet with the I-Bit set.
router ↗.quic ↗.useDplpmtud	bool	false	If true, uses DPLPMTUD (RFC8899) to determine the PMTU.
router ↗.quic ↗.maxPmtu	int	65535B	With useDplpmtud, it is used as upper limit for the PMTU search. Without useDplpmtud, the PMTU is set to the minimum of the MTU of the outgoing interface and this value.
router ↗.quic ↗.dplpmtudMinPmtu	int	0	Specifies the minimum PMTU to use (if 0, it uses 1200 B for IPv4 or 1280 B for IPv6 as minimum PMTU).
router ↗.quic ↗.dplpmtudMaxProbes	int	3	Specifies the number of probe packet sent for one candidate before given up.
router ↗.quic ↗.dplpmtudUsePtb	bool	true	If true, uses ICMP Packet Too Big (PTB) messages for DPLPMTUD.
router ↗.quic ↗.dplpmtudCandidateSequence	string	“OptBinary”	Specifies the sequence of candidates used for the search algorithm of DPLPMTUD (Up, Down, OptUp, Binary, OptBinary, Jump).
router ↗.quic ↗.skipPacketNumberForDplpmtudProbePackets	bool	false	Specifies whether to skip a packet number for a DPLPMTUD probe packet in order to avoid ack delay.
router ↗.quic ↗.useCwndForParallelProbes	int	0	If 0, no parallel probe packets; if 1, uses the availbale cwnd to send additional probe packets and if 2 prefers to send probe packets over other packets.
router ↗.quic ↗.sendDataDuringInitalDplpmtudBase	bool	true	If false, waits for DPLPMTUD switching initially to SEARCH before start sending application data.
router ↗.quic ↗.dplpmtudUsePmtuValidator	bool	true	If true, activates the PMTU Validator that trys to detect when the current PMTU estimation is larger than the actual PMTU.
router ↗.quic ↗.pmtuValidatorLostPacketsThreshold	int	2	Specifies the number of lost data packets before assuming a decreased PMTU.
router ↗.quic ↗.pmtuValidatorTimeThreshold	double	-1s	Specifies the time threshold between two lost packets. If negative, pmtuValidatorSrttFactorThreshold is used instead.
router ↗.quic ↗.pmtuValidatorSrttFactorThreshold	int	1	If pmtuValidatorTimeThreshold is negative, this number multiplied by SRTT is used instead.
router ↗.quic ↗.pmtuValidatorInvalidOnPersistentCongestion	int	1	If 0, disabled. If 1, the PMTU validator uses persistent congeation as signal for a decreased PMTU. If 2, only two consecutive persisten congestions used as signal. If 3, …
router ↗.quic ↗.reducePacketTimeThreshold	double	0s	Specifies after which time with no acks, packets with reduced size are sent. If zero, packet size reduction is disabled. If negative, reducePacketPtoFactorThreshold is used instead.
router ↗.quic ↗.reducePacketPtoFactorThreshold	int	3	If reducePacketTimeThreshold is negative, this number multiplied by PTO is used instead.
router ↗.tn ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.tn ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.tn ↗.forwardServiceRegistration	bool	true
router ↗.tn ↗.forwardProtocolRegistration	bool	true
router ↗.tn ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.tn ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.tn ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.at ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.at ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
router ↗.at ↗.forwardServiceRegistration	bool	true
router ↗.at ↗.forwardProtocolRegistration	bool	true
router ↗.at ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
router ↗.at ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
router ↗.at ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
router ↗.ospf ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.ospf ↗.interfaceTableModule	string
router ↗.ospf ↗.routingTableModule	string
router ↗.ospf ↗.checksumMode	string	“declared”
router ↗.ospf ↗.startupTime	double	0s	Delay before starting OSPF
router ↗.ospf ↗.ospfConfig	xml	xml(“<OSPFASConfig> \ <Router name=’*’ RFC1583Compatible=’true’> \ <BroadcastInterface ifName=’eth[]’ areaID=’0.0.0.0’ interfaceOutputCost=’0’ /> \ <PointToPointInterface ifName=’ppp[*]’ areaID=’0.0.0.0’ interfaceOutputCost=’0’ /> \ </Router> </OSPFASConfig>”)	xml containing the full OSPF AS configuration
router ↗.ospf ↗.routerPriority	int	1	Priority in DR/BDR election (Specify 0 to exclude the router from the election)
router ↗.ospf ↗.areaID	string	“0.0.0.0”
router ↗.ospf ↗.RFC1583Compatible	bool	false	If ‘false’, prune the set of routing table entries for the ASBR (RFC 3101)
router ↗.ospf ↗.DistributeDefaultRoute	bool	false	Distribute the default route (if exists) using AS-External LSA
router ↗.ospf ↗.helloInterval	int	10s	Specifies the time in seconds between hello packets that the other router sends on an interface
router ↗.ospf ↗.pollInterval	int	120s	Specifies the length of time, in seconds, between OSPF packets that the router send before adjacency is established with a neighbor
router ↗.ospf ↗.routerDeadInterval	int	40s	The interval during which at least one hello packet must be received from a neighbor before the router declares that neighbor as down
router ↗.ospf ↗.retransmissionInterval	int	5s	The time between OSPF LSA retransmissions for adjacencies that belongs to the interface
router ↗.ospf ↗.interfaceTransmissionDelay	int	1s	The number of seconds required to transmit a link state update packet. Valid values are 1 to 65535
router ↗.ospf ↗.interfaceMode	string	“Active”	NoOSPF: the interface is not advertised by OSPF
router ↗.ospf ↗.referenceBandwidth	int	1e8bps	Reference bandwidth for cost calculation
router ↗.ospf ↗.interfaceOutputCost	int	0	Cost of link on the interface (1-1000), 0 means use reference bandwidth
router ↗.ospf ↗.externalInterfaceOutputCost	int	1	Cost of link (1-1000)
router ↗.ospf ↗.externalInterfaceOutputType	string	“Type2”	Type1\|Type2
router ↗.ospf ↗.forwardingAddress	string	“0.0.0.0”
router ↗.ospf ↗.linkCost	int	1	Cost of link (1-1000) for HostInterface and LoopbackInterface only
router ↗.ospf ↗.authenticationType	string	“NullType”
router ↗.ospf ↗.authenticationKey	string	“0x00”	0xnn..nn
router ↗.bgp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.bgp ↗.interfaceTableModule	string
router ↗.bgp ↗.routingTableModule	string
router ↗.bgp ↗.addressFamily	string	“ipv4”	address family this BGP instance operates on (one instance serves one family)
router ↗.bgp ↗.routerId	string	“”	the 4-octet BGP Identifier (RFC 4271/6286); required for IPv6, where there is no IPv4 router id to derive it from
router ↗.bgp ↗.ospfRoutingModule	string	parent.hasOspf ? “^.ospf” : “”
router ↗.bgp ↗.startupTime	double	0s	Delay before starting BGP
router ↗.bgp ↗.restartDelay	double	1s	On a lifecycle restart (after a stop or crash), the delay before BGP comes back up when startupTime is 0s, so the node can bring its interfaces back up first
router ↗.bgp ↗.shutdownTime	double	1s	On graceful stop, delay before destroying BGP state so TCP can flush the session teardown (FIN)
router ↗.bgp ↗.stopOperationTimeout	double	2s	Timeout for the lifecycle stop operation
router ↗.bgp ↗.connectRetryTime	double	120s	ConnectRetryTimer interval (RFC 4271), applied to all sessions
router ↗.bgp ↗.holdTime	double	180s	Hold Time proposed in the OPEN message (RFC 4271); the effective hold time is negotiated to the minimum of the two peers
router ↗.bgp ↗.keepAliveTime	double	60s	KeepAlive interval (RFC 4271), typically holdTime/3
router ↗.bgp ↗.bgpConfig	xml
router ↗.bgp ↗.startDelay	double	1s	Base delay before a router starts its sessions (staggers session startup; per-session offsets are added on top)
router ↗.bgp ↗.ExternalPeerStartDelayOffset	double	0.5s
router ↗.bgp ↗.redistributeRip	bool	false	Redistribute routes learned by RIP into BGP
router ↗.bgp ↗.redistributeOspf	string	“”	Redistribute routes learned by OSPF into BGP (O IA E1 E2)
router ↗.bgp ↗.redistributeInternal	bool	false	Redistribute BGP routes into OSPF (as external routes)
router ↗.bgp ↗.nextHopSelf	bool	false
router ↗.bgp ↗.localPreference	int	100
router ↗.bgp ↗.connectedCheck	bool	true
router ↗.bgp ↗.ebgpMultihop	int	1
router ↗.rip ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.rip ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.rip ↗.routingTableModule	string
router ↗.rip ↗.ripConfig	xml	xml(“<config><interface metric=’1’/></config>”)
router ↗.rip ↗.mode	string	“RIPv2”
router ↗.rip ↗.startupTime	double	uniform(0s,updateInterval)	Delay before starting RIP
router ↗.rip ↗.shutdownTime	double	1s	Delay before shutting down RIP
router ↗.rip ↗.updateInterval	double	30s	30s timer or update timer
router ↗.rip ↗.routeExpiryTime	double	180s	Invalid timer
router ↗.rip ↗.routePurgeTime	double	120s	Garbage collection timer or flush timer
router ↗.rip ↗.holdDownTime	double	0s	Hold-down timer (not defined in RFC). 0s means not active
router ↗.rip ↗.triggeredUpdate	bool	true	Sending triggered updates on route changes
router ↗.rip ↗.triggeredUpdateDelay	double	uniform(1s,5s)
router ↗.rip ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
router ↗.rip ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
router ↗.pim ↗.pimSplitter ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.pim ↗.pimSplitter ↗.interfaceTableModule	string
router ↗.pim ↗.pimSplitter ↗.pimInterfaceTableModule	string
router ↗.pim ↗.pimSplitter ↗.addressFamily	string	“ipv4”
router ↗.pim ↗.pimDM ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.pim ↗.pimDM ↗.interfaceTableModule	string
router ↗.pim ↗.pimDM ↗.routingTableModule	string
router ↗.pim ↗.pimDM ↗.pimInterfaceTableModule	string
router ↗.pim ↗.pimDM ↗.pimNeighborTableModule	string
router ↗.pim ↗.pimDM ↗.addressFamily	string	“ipv4”
router ↗.pim ↗.pimDM ↗.holdTime	double	3.5 * helloPeriod	“The Hold Time in the Hello Message should be set to a value that can reasonably be expected to keep the Hello active until a new Hello message is received. On most links, this will be 3.5 times the value of Hello_Period.”
router ↗.pim ↗.pimSM ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.pim ↗.pimSM ↗.interfaceTableModule	string
router ↗.pim ↗.pimSM ↗.routingTableModule	string
router ↗.pim ↗.pimSM ↗.pimInterfaceTableModule	string
router ↗.pim ↗.pimSM ↗.pimNeighborTableModule	string
router ↗.pim ↗.pimSM ↗.addressFamily	string	“ipv4”	address family this PIM-SM instance operates on
router ↗.pim ↗.pimSM ↗.RP	string	“”
router ↗.pim ↗.pimSM ↗.designatedRouterPriority	int	-1
router ↗.pim ↗.pimSM ↗.holdTime	double	3.5 * helloPeriod
router ↗.pim ↗.pimSM ↗.joinPrunePeriod	double	60s	Period between Join/Prune messages (called t_periodic in the RFC)
router ↗.pim ↗.pimInterfaceTable ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.pim ↗.pimInterfaceTable ↗.interfaceTableModule	string
router ↗.pim ↗.pimInterfaceTable ↗.pimConfig	xml	xml(“<config/>”)
router ↗.pim ↗.pimNeighborTable ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.dhcp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.dhcp ↗.interfaceTableModule	string		The path to the InterfaceTable module
router ↗.dhcp ↗.interface	string	“”	Interface to listen on; can be left empty if there is only one non-loopback interface
router ↗.dhcp ↗.numReservedAddresses	int		Number of addresses to skip at the start of the network’s address range
router ↗.dhcp ↗.maxNumClients	int		Maximum number of clients (IPs) allowed to be leased
router ↗.dhcp ↗.gateway	string	“”	Gateway to assign, if empty use the interface address
router ↗.dhcp ↗.leaseTime	int		Lease time in seconds
router ↗.dhcp ↗.startTime	double	0s	Application start time
router ↗.dhcp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
router ↗.dhcp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
router ↗.eigrp ↗.eigrpSplitter ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eigrp ↗.eigrpIpv4Pdm ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eigrp ↗.eigrpInterfaceTable ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eigrp ↗.eigrpIpv4NeighborTable ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eigrp ↗.eigrpIpv4TopologyTable ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eigrp ↗.eigrpRtp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eigrp ↗.eigrpInterfaceTable6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eigrp ↗.eigrpIpv6Pdm ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eigrp ↗.eigrpIpv6NeighborTable ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eigrp ↗.eigrpIpv6TopologyTable ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
router ↗.eigrp ↗.eigrpRtp6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.status ↗.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.status ↗.initialStatus	string	“UP”	Initial status of the network node
pgw.environment ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.environment ↗.initStage	int	0	Initialization stage for the setup command
pgw.environment ↗.globalNamespace	bool	false	Create new network namespaces under /var/run/netns/ (Linux only)
pgw.environment ↗.namespace	string	“”	Name of the host OS network namespace (optional) (Linux only)
pgw.environment ↗.setupCommand	string	“”	A host OS system command
pgw.environment ↗.teardownCommand	string	“”	A host OS system command
pgw.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
pgw.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pgw.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pgw.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pgw.pcapRecorder ↗.fileFormat	string	“pcapng”
pgw.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
pgw.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pgw.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pgw.pcapRecorder ↗.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
pgw.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pgw.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pgw.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pgw.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pgw.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pgw.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pgw.interfaceTable ↗.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.interfaceTable ↗.displayAddresses	bool	false	Whether to display IP addresses on links
pgw.cb ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.cb ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.cb ↗.forwardServiceRegistration	bool	true
pgw.cb ↗.forwardProtocolRegistration	bool	true
pgw.cb ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.cb ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.cb ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.bl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.bl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.bl ↗.forwardServiceRegistration	bool	true
pgw.bl ↗.forwardProtocolRegistration	bool	true
pgw.bl ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.bl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.bl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.ethernet ↗.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ethernet ↗.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
pgw.ethernet ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ethernet ↗.fcsMode	string	“declared”
pgw.ethernet ↗.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
pgw.ethernet ↗.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
pgw.li ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.li ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.li ↗.forwardServiceRegistration	bool	true
pgw.li ↗.forwardProtocolRegistration	bool	true
pgw.li ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.li ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.li ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.lo ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.lo ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
pgw.lo ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pgw.lo ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pgw.lo ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pgw.lo ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
pgw.lo ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
pgw.lo ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pgw.lo ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pgw.lo ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pgw.lo ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pgw.lo ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pgw.lo ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pgw.lo ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pgw.lo ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pgw.lo ↗.lo ↗.displayStringTextFormat	string	“rcv:{numRcvdOK} snt:{numSent}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.lo ↗.lo ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.lo ↗.lo ↗.mtu	int	4470B
pgw.wlan ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
pgw.wlan ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pgw.wlan ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pgw.wlan ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pgw.wlan ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
pgw.wlan ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
pgw.wlan ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pgw.wlan ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pgw.wlan ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pgw.wlan ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pgw.wlan ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pgw.wlan ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pgw.wlan ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pgw.wlan ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pgw.wlan ↗.mib ↗.displayStringTextFormat	string	“Address: {address}{ssidStr}\n{modeStr}{stationTypeStr}{qosStr}{associatedStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.agent ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.agent ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.wlan ↗.agent ↗.mibModule	string
pgw.wlan ↗.agent ↗.activeScan	bool	true	Selects between active and passive scanning
pgw.wlan ↗.agent ↗.channelsToScan	string	“”	List of channel numbers to scan (space delimited); empty means all channels
pgw.wlan ↗.agent ↗.probeDelay	double	100ms	Delay before sending a probe request during active scanning
pgw.wlan ↗.agent ↗.minChannelTime	double	150ms	Min interval to spend on a channel during active scanning
pgw.wlan ↗.agent ↗.maxChannelTime	double	300ms	Channel time for passive scanning, and max channel time for active scanning
pgw.wlan ↗.agent ↗.authenticationTimeout	double	5s	Timeout for the authentication procedure
pgw.wlan ↗.agent ↗.associationTimeout	double	5s	Timeout for the association procedure
pgw.wlan ↗.agent ↗.startingTime	double	-1s	Agent starting time.
pgw.wlan ↗.agent ↗.defaultSsid	string	“”	List of allowed SSIDs to connect to; leave empty for no filtering
pgw.wlan ↗.mgmt ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mgmt ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.wlan ↗.mgmt ↗.numChannels	int	1	Number of channels to scan
pgw.wlan ↗.mgmt ↗.mibModule	string
pgw.wlan ↗.mgmt ↗.macModule	string		The path to the MAC module
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.pendingQueueModule	string	“^.pendingQueue”
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.originatorMacDataServiceModule	string	“^.^.originatorMacDataService”
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.ackHandlerModule	string	“^.^.ackHandler”
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
pgw.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
pgw.wlan ↗.mac ↗.dcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.fragmentationThreshold	int	1500B
pgw.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.multicastFrameBitrate	double	-1bps
pgw.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.responseAckFrameBitrate	double	-1bps
pgw.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.responseCtsFrameBitrate	double	-1bps
pgw.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameBitrate	double	-1bps	Fastest
pgw.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameBandwidth	double	nan Hz	Unspecified by default
pgw.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameNumSpatialStreams	int	-1	Unspecified by default
pgw.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.mgmtFrameBitrate	double	-1bps	Fastest
pgw.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.controlFrameBitrate	double	-1bps
pgw.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.shortRetryLimit	int	7
pgw.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.longRetryLimit	int	4
pgw.wlan ↗.mac ↗.dcf ↗.originatorProtectionMechanism ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.originatorProtectionMechanism ↗.rateSelectionModule	string
pgw.wlan ↗.mac ↗.dcf ↗.ackHandler ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.rateSelectionModule	string
pgw.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.ackTimeout	double	-1s
pgw.wlan ↗.mac ↗.dcf ↗.recipientAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.recipientAckPolicy ↗.rateSelectionModule	string
pgw.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.rateSelectionModule	string
pgw.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.ctsTimeout	double	-1s
pgw.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.rtsThreshold	int	2346B
pgw.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.rxModule	string
pgw.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.rateSelectionModule	string
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.pendingQueueModule	string	“^.pendingQueue”
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.originatorMacDataServiceModule	string	“^.^.^.originatorMacDataService”
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.ackHandlerModule	string	“^.ackHandler”
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.ackHandler ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.txopProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.txopProcedure ↗.txopLimit	double	-1s
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.shortRetryLimit	int	7
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.longRetryLimit	int	4
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.collisionController ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.shortRetryLimit	int	7
pgw.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.longRetryLimit	int	4
pgw.wlan ↗.mac ↗.hcf ↗.hcca ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.subframeNumThreshold	int	-1	Minimum number of subframes needed to compose an A-MSDU. (-1 means it won’t be checked)
pgw.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.aggregationLengthThreshold	int	-1	The minimum length for an aggregated payload necessary to create an A-MSDU (-1 means it won’t be checked).
pgw.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.maxAMsduSize	int	4065	-1 means infinity
pgw.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.qOsCheck	bool	true	Turns on/off the check of the presence of the QoS flag (false means off – this is needed for aggregation in DCF mode).
pgw.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.mpduAggregationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.fragmentationThreshold	int	1500B
pgw.wlan ↗.mac ↗.hcf ↗.singleProtectionMechanism ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.singleProtectionMechanism ↗.rateSelectionModule	string
pgw.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.multicastFrameBitrate	double	-1bps
pgw.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseAckFrameBitrate	double	-1bps
pgw.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseBlockAckFrameBitrate	double	-1bps
pgw.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseCtsFrameBitrate	double	-1bps
pgw.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameBitrate	double	-1bps	Fastest
pgw.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameBandwidth	double	nan Hz	Unspecified by default
pgw.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameNumSpatialStreams	int	-1	Unspecified by default
pgw.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.mgmtFrameBitrate	double	-1bps	Fastest
pgw.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.controlFrameBitrate	double	-1bps
pgw.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.rateSelectionModule	string
pgw.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.blockAckReqThreshold	int	5
pgw.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.maxBlockAckPolicyFrameLength	int	1000B
pgw.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.blockAckTimeout	double	-1s
pgw.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.ackTimeout	double	-1s
pgw.wlan ↗.mac ↗.hcf ↗.recipientAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.recipientAckPolicy ↗.rateSelectionModule	string
pgw.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.rateSelectionModule	string
pgw.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.ctsTimeout	double	-1s
pgw.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.rtsThreshold	int	2346B
pgw.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.rxModule	string
pgw.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.rateSelectionModule	string
pgw.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.delayedAckPolicySupported	bool	false
pgw.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.aMsduSupported	bool	true
pgw.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.maximumAllowedBufferSize	int	64
pgw.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
pgw.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.delayedAckPolicySupported	bool	false
pgw.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.aMsduSupported	bool	true
pgw.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.maximumAllowedBufferSize	int	64
pgw.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
pgw.wlan ↗.mac ↗.ds ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.ds ↗.mibModule	string
pgw.wlan ↗.mac ↗.rx ↗.displayStringTextFormat	string	“{rxStatus}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.tx ↗.displayStringTextFormat	string	“{txFramePrefix}{txState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.wlan ↗.mac ↗.tx ↗.rxModule	string
pgw.ppp ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ppp ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
pgw.ppp ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pgw.ppp ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pgw.ppp ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pgw.ppp ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
pgw.ppp ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
pgw.ppp ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pgw.ppp ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pgw.ppp ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pgw.ppp ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pgw.ppp ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pgw.ppp ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pgw.ppp ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pgw.ppp ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pgw.ppp ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ppp ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
pgw.ppp ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
pgw.ppp ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
pgw.ppp ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
pgw.ppp ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
pgw.ppp ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ppp ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ppp ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
pgw.ppp ↗.ppp ↗.mtu	int	4470B
pgw.ppp ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
pgw.ppp ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
pgw.eth ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.eth ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
pgw.eth ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pgw.eth ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pgw.eth ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pgw.eth ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
pgw.eth ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
pgw.eth ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pgw.eth ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pgw.eth ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pgw.eth ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pgw.eth ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pgw.eth ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pgw.eth ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pgw.eth ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pgw.tun ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.tun ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
pgw.tun ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pgw.tun ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pgw.tun ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pgw.tun ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
pgw.tun ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
pgw.tun ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pgw.tun ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pgw.tun ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pgw.tun ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pgw.tun ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pgw.tun ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pgw.tun ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pgw.tun ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pgw.tun ↗.tun ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.tun ↗.tun ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.tun ↗.tun ↗.mtu	int	1500B
pgw.virt ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.virt ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
pgw.virt ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pgw.virt ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pgw.virt ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pgw.virt ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
pgw.virt ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
pgw.virt ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pgw.virt ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pgw.virt ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pgw.virt ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pgw.virt ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pgw.virt ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pgw.virt ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pgw.virt ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pgw.virt ↗.tunnel ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.virt ↗.tunnel ↗.interfaceTableModule	string
pgw.virt ↗.tunnel ↗.realInterface	string
pgw.virt ↗.tunnel ↗.protocol	string	vlanId != -1 ? “ieee8021qctag” : “”
pgw.virt ↗.tunnel ↗.address	string	“copy”
pgw.virt ↗.tunnel ↗.vlanId	int	-1
pgw.virt ↗.tunnel ↗.steal	bool	vlanId != -1
pgw.ipv4 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.configurator ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv4 ↗.configurator ↗.routingTableModule	string
pgw.ipv4 ↗.configurator ↗.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
pgw.ipv4 ↗.configurator ↗.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
pgw.ipv4 ↗.routingTable ↗.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv4 ↗.routingTable ↗.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
pgw.ipv4 ↗.routingTable ↗.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
pgw.ipv4 ↗.routingTable ↗.forwarding	bool	true	Turns IP forwarding on/off
pgw.ipv4 ↗.routingTable ↗.multicastForwarding	bool	false	Turns multicast forwarding on/off
pgw.ipv4 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
pgw.ipv4 ↗.routingTable ↗.routingFile	string	“”	Routing table file name
pgw.ipv4 ↗.natTable ↗.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.natTable ↗.networkProtocolModule	string	“^.ip”
pgw.ipv4 ↗.natTable ↗.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
pgw.ipv4 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.ipv4 ↗.up ↗.forwardServiceRegistration	bool	true
pgw.ipv4 ↗.up ↗.forwardProtocolRegistration	bool	true
pgw.ipv4 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.ipv4 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.ipv4 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.ipv4 ↗.igmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.igmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv4 ↗.igmp ↗.routingTableModule	string
pgw.ipv4 ↗.igmp ↗.checksumMode	string	“declared”
pgw.ipv4 ↗.igmp ↗.enabled	bool	true
pgw.ipv4 ↗.igmp ↗.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
pgw.ipv4 ↗.igmp ↗.queryInterval	double	125s
pgw.ipv4 ↗.igmp ↗.queryResponseInterval	double	10s
pgw.ipv4 ↗.igmp ↗.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
pgw.ipv4 ↗.igmp ↗.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
pgw.ipv4 ↗.igmp ↗.startupQueryInterval	double	queryInterval / 4
pgw.ipv4 ↗.igmp ↗.startupQueryCount	int	robustnessVariable
pgw.ipv4 ↗.igmp ↗.lastMemberQueryInterval	double	1s
pgw.ipv4 ↗.igmp ↗.lastMemberQueryCount	int	robustnessVariable
pgw.ipv4 ↗.igmp ↗.unsolicitedReportInterval	double	10s
pgw.ipv4 ↗.icmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.icmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv4 ↗.icmp ↗.routingTableModule	string
pgw.ipv4 ↗.icmp ↗.checksumMode	string	“declared”
pgw.ipv4 ↗.icmp ↗.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
pgw.ipv4 ↗.mp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.mp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.ipv4 ↗.mp ↗.forwardServiceRegistration	bool	true
pgw.ipv4 ↗.mp ↗.forwardProtocolRegistration	bool	true
pgw.ipv4 ↗.mp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.ipv4 ↗.mp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.ipv4 ↗.mp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.ipv4 ↗.ip ↗.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.ip ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv4 ↗.ip ↗.routingTableModule	string
pgw.ipv4 ↗.ip ↗.arpModule	string
pgw.ipv4 ↗.ip ↗.icmpModule	string
pgw.ipv4 ↗.ip ↗.checksumMode	string	“declared”
pgw.ipv4 ↗.ip ↗.timeToLive	int	32
pgw.ipv4 ↗.ip ↗.multicastTimeToLive	int	32
pgw.ipv4 ↗.ip ↗.fragmentTimeout	double	60s
pgw.ipv4 ↗.ip ↗.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
pgw.ipv4 ↗.ip ↗.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
pgw.ipv4 ↗.ip ↗.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
pgw.ipv4 ↗.ip ↗.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
pgw.ipv4 ↗.ip ↗.maxLifetime	double	-1s	Packets older than the limit are discarded
pgw.ipv4 ↗.arp ↗.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.arp ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv4 ↗.arp ↗.routingTableModule	string
pgw.ipv4 ↗.arp ↗.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
pgw.ipv4 ↗.arp ↗.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
pgw.ipv4 ↗.arp ↗.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
pgw.ipv4 ↗.arp ↗.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
pgw.ipv4 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.ipsec ↗.networkProtocolModule	string	“^.ip”
pgw.ipv4 ↗.ipsec ↗.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
pgw.ipv4 ↗.ipsec ↗.interfaceTableModule	string
pgw.ipv4 ↗.ipsec ↗.spdModule	string	“^.spd”
pgw.ipv4 ↗.ipsec ↗.sadModule	string	“^.sad”
pgw.ipv4 ↗.ipsec ↗.spdConfig	xml
pgw.ipv4 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
pgw.ipv4 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
pgw.ipv4 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
pgw.ipv4 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
pgw.ipv4 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
pgw.ipv4 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
pgw.ipv4 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
pgw.ipv4 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
pgw.ipv4 ↗.ipsec ↗.espProtectInDelay	double	0.0s
pgw.ipv4 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv4 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.ipv4 ↗.lp ↗.forwardServiceRegistration	bool	true
pgw.ipv4 ↗.lp ↗.forwardProtocolRegistration	bool	true
pgw.ipv4 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.ipv4 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.ipv4 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.ipv6 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.configurator ↗.interfaceTableModule	string
pgw.ipv6 ↗.configurator ↗.routingTableModule	string
pgw.ipv6 ↗.configurator ↗.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
pgw.ipv6 ↗.configurator ↗.configureRoutingTable	bool	true
pgw.ipv6 ↗.routingTable ↗.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv6 ↗.routingTable ↗.routes	xml	xml(“<routingTable/>”)
pgw.ipv6 ↗.routingTable ↗.forwarding	bool	false
pgw.ipv6 ↗.routingTable ↗.isRouter	bool	this.forwarding
pgw.ipv6 ↗.routingTable ↗.multicastForwarding	bool	false
pgw.ipv6 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
pgw.ipv6 ↗.routingTable ↗.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
pgw.ipv6 ↗.routingTable ↗.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
pgw.ipv6 ↗.routingTable ↗.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
pgw.ipv6 ↗.routingTable ↗.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
pgw.ipv6 ↗.routingTable ↗.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
pgw.ipv6 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.ipv6 ↗.up ↗.forwardServiceRegistration	bool	true
pgw.ipv6 ↗.up ↗.forwardProtocolRegistration	bool	true
pgw.ipv6 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.ipv6 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.ipv6 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.ipv6 ↗.icmpv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.icmpv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv6 ↗.icmpv6 ↗.checksumMode	string	“declared”
pgw.ipv6 ↗.icmpv6 ↗.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
pgw.ipv6 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.ipv6 ↗.lp ↗.forwardServiceRegistration	bool	true
pgw.ipv6 ↗.lp ↗.forwardProtocolRegistration	bool	true
pgw.ipv6 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.ipv6 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.ipv6 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.ipv6 ↗.neighbourDiscovery ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.neighbourDiscovery ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv6 ↗.neighbourDiscovery ↗.checksumMode	string	“declared”
pgw.ipv6 ↗.neighbourDiscovery ↗.icmpv6Module	string
pgw.ipv6 ↗.neighbourDiscovery ↗.mipv6Module	string
pgw.ipv6 ↗.neighbourDiscovery ↗.routingTableModule	string
pgw.ipv6 ↗.neighbourDiscovery ↗.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
pgw.ipv6 ↗.neighbourDiscovery ↗.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
pgw.ipv6 ↗.neighbourDiscovery ↗.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
pgw.ipv6 ↗.neighbourDiscovery ↗.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
pgw.ipv6 ↗.neighbourDiscovery ↗.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
pgw.ipv6 ↗.neighbourDiscovery ↗.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
pgw.ipv6 ↗.neighbourDiscovery ↗.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
pgw.ipv6 ↗.neighbourDiscovery ↗.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
pgw.ipv6 ↗.neighbourDiscovery ↗.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
pgw.ipv6 ↗.neighbourDiscovery ↗.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
pgw.ipv6 ↗.ipv6 ↗.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.ipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv6 ↗.ipv6 ↗.routingTableModule	string
pgw.ipv6 ↗.ipv6 ↗.ipv6NeighbourDiscoveryModule	string
pgw.ipv6 ↗.ipv6 ↗.icmpv6Module	string
pgw.ipv6 ↗.ipv6 ↗.procDelay	double	0s
pgw.ipv6 ↗.ipv6 ↗.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
pgw.ipv6 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.ipsec ↗.interfaceTableModule	string
pgw.ipv6 ↗.ipsec ↗.spdModule	string	“^.spd”
pgw.ipv6 ↗.ipsec ↗.sadModule	string	“^.sad”
pgw.ipv6 ↗.ipsec ↗.spdConfig	xml
pgw.ipv6 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
pgw.ipv6 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
pgw.ipv6 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
pgw.ipv6 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
pgw.ipv6 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
pgw.ipv6 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
pgw.ipv6 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
pgw.ipv6 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
pgw.ipv6 ↗.ipsec ↗.espProtectInDelay	double	0.0s
pgw.ipv6 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.mipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.mipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.ipv6 ↗.mipv6 ↗.ipv6NeighbourDiscoveryModule	string
pgw.ipv6 ↗.mipv6 ↗.bindingUpdateListModule	string
pgw.ipv6 ↗.mipv6 ↗.bindingCacheModule	string
pgw.ipv6 ↗.mipv6 ↗.isHomeAgent	bool
pgw.ipv6 ↗.mipv6 ↗.isMobileNode	bool
pgw.ipv6 ↗.mipv6 ↗.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
pgw.ipv6 ↗.mipv6 ↗.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
pgw.ipv6 ↗.mipv6 ↗.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
pgw.ipv6 ↗.buList ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.bindingCache ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.pmipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.pmipv6 ↗.interfaceTableModule	string		path to the InterfaceTable module
pgw.ipv6 ↗.pmipv6 ↗.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
pgw.ipv6 ↗.pmipv6 ↗.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
pgw.ipv6 ↗.pmipv6 ↗.isMobileAccessGateway	bool	false
pgw.ipv6 ↗.pmipv6 ↗.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
pgw.ipv6 ↗.pmipv6 ↗.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
pgw.ipv6 ↗.pmipv6 ↗.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
pgw.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
pgw.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
pgw.ipv6 ↗.mld ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.ipv6 ↗.mld ↗.interfaceTableModule	string		path to the InterfaceTable module
pgw.ipv6 ↗.mld ↗.routingTableModule	string		path to the Ipv6RoutingTable module
pgw.ipv6 ↗.mld ↗.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
pgw.ipv6 ↗.mld ↗.enabled	bool	true	when false, MLD is inert on this node (see above)
pgw.ipv6 ↗.mld ↗.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
pgw.ipv6 ↗.mld ↗.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
pgw.ipv6 ↗.mld ↗.queryInterval	double	125s	querier: interval between periodic General Queries
pgw.ipv6 ↗.mld ↗.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
pgw.ipv6 ↗.mld ↗.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
pgw.ipv6 ↗.mld ↗.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
pgw.ipv6 ↗.mld ↗.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
pgw.ipv6 ↗.mld ↗.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
pgw.ipv6 ↗.mld ↗.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
pgw.nl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.nl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.nl ↗.forwardServiceRegistration	bool	true
pgw.nl ↗.forwardProtocolRegistration	bool	true
pgw.nl ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.nl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.nl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.udp ↗.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.udp ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.udp ↗.checksumMode	string	“declared”
pgw.udp ↗.defaultMulticastLoop	bool	true
pgw.tcp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.tcp ↗.checksumMode	string	“declared”
pgw.tcp ↗.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
pgw.tcp ↗.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
pgw.tcp ↗.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
pgw.tcp ↗.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
pgw.tcp ↗.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
pgw.tcp ↗.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
pgw.tcp ↗.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
pgw.tcp ↗.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
pgw.tcp ↗.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
pgw.tcp ↗.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
pgw.tcp ↗.msl	int	120s	Maximum Segment Lifetime
pgw.tcp ↗.tcpAlgorithmClass	string	“TcpReno”
pgw.tcp ↗.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
pgw.tcp ↗.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
pgw.tcp ↗.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
pgw.tcp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
pgw.tcp ↗.ecnWillingness	bool	false	True if willing to use ECN
pgw.tcp ↗.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
pgw.tcp ↗.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
pgw.tcp ↗.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
pgw.sctp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.sctp ↗.interfaceTableModule	string
pgw.sctp ↗.routingTableModule	string
pgw.sctp ↗.checksumMode	string	“declared”
pgw.sctp ↗.numGapReports	int	3
pgw.sctp ↗.rtoInitial	double	3s
pgw.sctp ↗.rtoMin	double	1s
pgw.sctp ↗.rtoMax	double	60s
pgw.sctp ↗.rtoAlpha	double	0.125
pgw.sctp ↗.rtoBeta	double	0.250
pgw.sctp ↗.maxBurst	int	4
pgw.sctp ↗.maxBurstVariant	string	“maxBurst”
pgw.sctp ↗.initialWindow	int	0
pgw.sctp ↗.assocMaxRetrans	int	10
pgw.sctp ↗.pathMaxRetrans	int	5
pgw.sctp ↗.maxInitRetrans	int	8
pgw.sctp ↗.sackPeriod	double	200ms
pgw.sctp ↗.sackFrequency	int	2
pgw.sctp ↗.reactivatePrimaryPath	bool	false
pgw.sctp ↗.sendQueueLimit	int	0
pgw.sctp ↗.validCookieLifetime	double	10s
pgw.sctp ↗.enableHeartbeats	bool	true
pgw.sctp ↗.hbInterval	double	30s
pgw.sctp ↗.sendHeartbeatsOnActivePaths	bool	false
pgw.sctp ↗.nagleEnabled	bool	true
pgw.sctp ↗.naglePoint	int	1468
pgw.sctp ↗.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
pgw.sctp ↗.fastRecoverySupported	bool	true
pgw.sctp ↗.sctpAlgorithmClass	string	“SctpAlg”
pgw.sctp ↗.ccModule	int	0	RFC4960=0
pgw.sctp ↗.osbWithHeader	bool	false
pgw.sctp ↗.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
pgw.sctp ↗.ssModule	int	0	ROUND_ROBIN=0
pgw.sctp ↗.arwnd	int	65535
pgw.sctp ↗.swsLimit	int	3000	Limit for SWS
pgw.sctp ↗.udpEncapsEnabled	bool	false
pgw.sctp ↗.natFriendly	bool	false
pgw.sctp ↗.bytesToAddPerRcvdChunk	int	0	For flow control
pgw.sctp ↗.bytesToAddPerPeerChunk	int	0	For flow control
pgw.sctp ↗.tellArwnd	bool	false	For flow control
pgw.sctp ↗.messageAcceptLimit	int	0	For flow control
pgw.sctp ↗.fairStart	double	0s
pgw.sctp ↗.fairStop	double	0s
pgw.sctp ↗.streamsToPaths	string	“”
pgw.sctp ↗.startEndToEndDelay	int	0
pgw.sctp ↗.stopEndToEndDelay	int	10
pgw.sctp ↗.throughputInterval	double	1
pgw.sctp ↗.auth	bool	false
pgw.sctp ↗.chunks	string	“”
pgw.sctp ↗.padding	bool	false
pgw.sctp ↗.addIP	bool	false
pgw.sctp ↗.addTime	double	0s
pgw.sctp ↗.addAddress	string	“”
pgw.sctp ↗.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
pgw.sctp ↗.packetDrop	bool	false
pgw.sctp ↗.sackNow	bool	false
pgw.sctp ↗.highSpeedCC	bool	false
pgw.sctp ↗.checkSackSeqNumber	bool	false
pgw.sctp ↗.nrSack	bool	false
pgw.sctp ↗.disableReneging	bool	false
pgw.sctp ↗.gapReportLimit	int	100000000
pgw.sctp ↗.gapListOptimizationVariant	string	“none”
pgw.sctp ↗.smartOverfullSACKHandling	bool	false
pgw.sctp ↗.allowQoSTracking	bool	false
pgw.sctp ↗.qosTrackingInterval	double	1.0s
pgw.sctp ↗.cmtSendAllVariant	string	“normal”
pgw.sctp ↗.cmtRetransmissionVariant	string	“normal”
pgw.sctp ↗.cmtCUCVariant	string	“normal”
pgw.sctp ↗.cmtBufferSplitVariant	string	“none”
pgw.sctp ↗.cmtBufferSplittingUsesOSB	bool	false
pgw.sctp ↗.cmtUseSFR	bool	true
pgw.sctp ↗.cmtUseDAC	bool	true
pgw.sctp ↗.cmtUseFRC	bool	true
pgw.sctp ↗.cmtSmartT3Reset	bool	true
pgw.sctp ↗.cmtSmartFastRTX	bool	true
pgw.sctp ↗.cmtSmartReneging	bool	false
pgw.sctp ↗.cmtSlowPathRTTUpdate	bool	false
pgw.sctp ↗.cmtChunkReschedulingVariant	string	“none”
pgw.sctp ↗.cmtChunkReschedulingThreshold	double	0.5
pgw.sctp ↗.cmtMovedChunksReduceCwnd	bool	true
pgw.sctp ↗.movedChunkFastRTXFactor	double	2.0
pgw.sctp ↗.cmtSackPath	string	“standard”
pgw.sctp ↗.strictCwndBooking	bool	false
pgw.sctp ↗.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
pgw.sctp ↗.cmtCCPathGroups	string	“”
pgw.sctp ↗.rpPathBlocking	bool	false
pgw.sctp ↗.rpScaleBlockingTimeout	bool	false
pgw.sctp ↗.rpMinCwnd	int	1
pgw.quic ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.quic ↗.routingTableModule	string		Set by StandardHost.
pgw.quic ↗.sendZeroRttTokenAsServer	bool	false
pgw.quic ↗.congestionControl	string	“NewReno”	Sets the congestion control algorithm (NewReno or No).
pgw.quic ↗.accurateIncreaseInNewRenoCongestionAvoidance	bool	true	For NewReno in Congestion Avoidance, if true, increases cwnd after cwnd-acked bytes; if false, increases cwnd on every acked packet by acked_bytes/cwnd.
pgw.quic ↗.sendQueueLimit	int	64MB	Sets the limit of the send queue in bytes.
pgw.quic ↗.sendQueueLowWaterRatio	double	.4	Defines the send queue low water mark relative to the limit.
pgw.quic ↗.initialMaxData	int	15MB	Connection level flow control credit. Used as own and peer’s value.
pgw.quic ↗.initialMaxStreamData	int	6MB	Stream level flow control credit for any stream (unidirectional, bidirectional local and remote). Used as own and peer’s value.
pgw.quic ↗.maxDataFrameThreshold	double	0.5*initialMaxData	Defines when MaxDataFrame in ConnectionFlowControl will be send.
pgw.quic ↗.maxStreamDataFrameThreshold	double	0.5*initialMaxStreamData	Defines when MaxStreamDataFrame in StreamFlowControl will be send.
pgw.quic ↗.roundConsumedDataValue	bool	false	If true, FlowControlResponder rounds consumedData in streamRcvBuffer to the next packetSize.
pgw.quic ↗.sendMaxDataFramesImmediately	bool	false	If true, a MAX_(STREAM)_DATA frame is sent immediately, after generation. Otherwise, sending the frame is delayed until the sending process starts due to another event.
pgw.quic ↗.bundleAckForNonAckElicitingPackets	bool	false	If true, bundles ack for non-ack-eliciting packets in an outgoing packet.
pgw.quic ↗.numReceivedAckElicitingsBeforeAck	int	2	Number of ack eliciting packets a receiver waits for, before it sends an ACK, immediately.
pgw.quic ↗.useIBit	bool	false	If true, an ACK frame is sent immediately upon an ack-eliciting packet with the I-Bit set.
pgw.quic ↗.useDplpmtud	bool	false	If true, uses DPLPMTUD (RFC8899) to determine the PMTU.
pgw.quic ↗.maxPmtu	int	65535B	With useDplpmtud, it is used as upper limit for the PMTU search. Without useDplpmtud, the PMTU is set to the minimum of the MTU of the outgoing interface and this value.
pgw.quic ↗.dplpmtudMinPmtu	int	0	Specifies the minimum PMTU to use (if 0, it uses 1200 B for IPv4 or 1280 B for IPv6 as minimum PMTU).
pgw.quic ↗.dplpmtudMaxProbes	int	3	Specifies the number of probe packet sent for one candidate before given up.
pgw.quic ↗.dplpmtudUsePtb	bool	true	If true, uses ICMP Packet Too Big (PTB) messages for DPLPMTUD.
pgw.quic ↗.dplpmtudCandidateSequence	string	“OptBinary”	Specifies the sequence of candidates used for the search algorithm of DPLPMTUD (Up, Down, OptUp, Binary, OptBinary, Jump).
pgw.quic ↗.skipPacketNumberForDplpmtudProbePackets	bool	false	Specifies whether to skip a packet number for a DPLPMTUD probe packet in order to avoid ack delay.
pgw.quic ↗.useCwndForParallelProbes	int	0	If 0, no parallel probe packets; if 1, uses the availbale cwnd to send additional probe packets and if 2 prefers to send probe packets over other packets.
pgw.quic ↗.sendDataDuringInitalDplpmtudBase	bool	true	If false, waits for DPLPMTUD switching initially to SEARCH before start sending application data.
pgw.quic ↗.dplpmtudUsePmtuValidator	bool	true	If true, activates the PMTU Validator that trys to detect when the current PMTU estimation is larger than the actual PMTU.
pgw.quic ↗.pmtuValidatorLostPacketsThreshold	int	2	Specifies the number of lost data packets before assuming a decreased PMTU.
pgw.quic ↗.pmtuValidatorTimeThreshold	double	-1s	Specifies the time threshold between two lost packets. If negative, pmtuValidatorSrttFactorThreshold is used instead.
pgw.quic ↗.pmtuValidatorSrttFactorThreshold	int	1	If pmtuValidatorTimeThreshold is negative, this number multiplied by SRTT is used instead.
pgw.quic ↗.pmtuValidatorInvalidOnPersistentCongestion	int	1	If 0, disabled. If 1, the PMTU validator uses persistent congeation as signal for a decreased PMTU. If 2, only two consecutive persisten congestions used as signal. If 3, …
pgw.quic ↗.reducePacketTimeThreshold	double	0s	Specifies after which time with no acks, packets with reduced size are sent. If zero, packet size reduction is disabled. If negative, reducePacketPtoFactorThreshold is used instead.
pgw.quic ↗.reducePacketPtoFactorThreshold	int	3	If reducePacketTimeThreshold is negative, this number multiplied by PTO is used instead.
pgw.tn ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.tn ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.tn ↗.forwardServiceRegistration	bool	true
pgw.tn ↗.forwardProtocolRegistration	bool	true
pgw.tn ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.tn ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.tn ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.at ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.at ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.at ↗.forwardServiceRegistration	bool	true
pgw.at ↗.forwardProtocolRegistration	bool	true
pgw.at ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.at ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
pgw.at ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
pgw.dnPpp ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.dnPpp ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
pgw.dnPpp ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pgw.dnPpp ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pgw.dnPpp ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pgw.dnPpp ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
pgw.dnPpp ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
pgw.dnPpp ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pgw.dnPpp ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pgw.dnPpp ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pgw.dnPpp ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pgw.dnPpp ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pgw.dnPpp ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pgw.dnPpp ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pgw.dnPpp ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
pgw.dnPpp ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.dnPpp ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
pgw.dnPpp ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
pgw.dnPpp ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
pgw.dnPpp ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
pgw.dnPpp ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
pgw.dnPpp ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.dnPpp ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
pgw.dnPpp ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
pgw.dnPpp ↗.ppp ↗.mtu	int	4470B
pgw.dnPpp ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
pgw.dnPpp ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
pgw.relay.trafficFlowFilter.binderModule	string	“binder”
pgw.relay.trafficFlowFilter.fastForwarding	bool	true
pgw.relay.gtpUser.binderModule	string	“binder”
pgw.relay.gtpUser.localPort	int	31
pgw.relay.gtpUser.tunnelPeerPort	int	31
pgw.rd ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pgw.rd ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
pgw.rd ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
pgw.nodeControl.binderModule	string	“binder”
pgw.nodeControl.gtpUserModule	string	“^.relay.gtpUser”
pgw.nodeControl.trafficFlowFilterModule	string	“^.relay.trafficFlowFilter”
pgw.nodeControl.ethernetBridgeModule	string	“^.ethBridge.sessionMux”	The node’s Ethernet session bridge (see EthernetSessionBridge), if it has one
pgw.nodeControl.gateway	string	“”	A MEC host UPF’s core network gateway, the anchor UPF whose sessions it serves; empty at an anchor
pgw.nodeControl.unstructuredPrefix	string	“”	The prefix the N6 addresses of Unstructured sessions are allocated from, e.g. “2001:db8:5::/64” or “10.5.0.0/16”; empty = the node anchors no Unstructured session (see the main comment)
pgw.nodeControl.unstructuredServer	string	“”	The application server the Unstructured sessions’ uplink goes to: a module path relative to the network, resolved in the family of unstructuredPrefix
pgw.nodeControl.unstructuredServerPort	int	-1	The UDP port of unstructuredServer the uplink goes to; must be set for Unstructured sessions
pgw.nodeControl.unstructuredPort	int	-1	The UDP port the node receives the Unstructured sessions’ downlink on, and sends their uplink from; must be set for Unstructured sessions
pgw.ndResponder.binderModule	string	“binder”
pgw.ndResponder.linkLocalAddress	string	“fe80::1”	The router’s address on every session’s link
pgw.ndResponder.routerLifetime	double	9000s	Router Lifetime in the Router Advertisements (max 9000s, RFC 4861)
pgw.ndResponder.curHopLimit	int	64	Cur Hop Limit in the Router Advertisements (0 = unspecified)
pgw.ndResponder.checksumMode	string	“declared”
eNB.interfaceTable ↗.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.interfaceTable ↗.displayAddresses	bool	false	Whether to display IP addresses on links
eNB.mobility ↗.displayStringTextFormat	string	“p: {position}\nv: {velocity}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.mobility ↗.subjectModule	string	“^”	The module path that determines the subject module, the motion of which this mobility model describes. The default value is the parent module
eNB.mobility ↗.coordinateSystemModule	string	“”	The module path of the geographic coordinate system module; optional, empty disables geographic conversion (and the {geo_position} directive)
eNB.mobility ↗.updateDisplayString	bool	true	Enables continuous update of the subject module’s position by modifying its display string
eNB.mobility ↗.constraintAreaMinX	double	-inf m	The minimum x position of the constraint area. It is unconstrained by default (negative infinity)
eNB.mobility ↗.constraintAreaMinY	double	-inf m	The minimum y position of the constraint area. It is unconstrained by default (negative infinity)
eNB.mobility ↗.constraintAreaMinZ	double	-inf m	The minimum z position of the constraint area. It is unconstrained by default (negative infinity)
eNB.mobility ↗.constraintAreaMaxX	double	inf m	The maximum x position of the constraint area. It is unconstrained by default (positive infinity)
eNB.mobility ↗.constraintAreaMaxY	double	inf m	The maximum y position of the constraint area. It is unconstrained by default (positive infinity)
eNB.mobility ↗.constraintAreaMaxZ	double	inf m	The maximum z position of the constraint area. It is unconstrained by default (positive infinity)
eNB.mobility ↗.initialX	double	uniform(this.constraintAreaMinX, this.constraintAreaMaxX)
eNB.mobility ↗.initialY	double	uniform(this.constraintAreaMinY, this.constraintAreaMaxY)
eNB.mobility ↗.initialZ	double	nanToZero(uniform(this.constraintAreaMinZ, this.constraintAreaMaxZ))
eNB.mobility ↗.initialLatitude	double	nan deg
eNB.mobility ↗.initialLongitude	double	nan deg
eNB.mobility ↗.initialAltitude	double	0m
eNB.mobility ↗.initialHeading	double	0deg
eNB.mobility ↗.initialElevation	double	0deg
eNB.mobility ↗.initialBank	double	0deg
eNB.mobility ↗.initFromDisplayString	bool	true	Enables one-time initialization from the subject module’s display string
eNB.mobility ↗.updateFromDisplayString	bool	true	Enables continuous update from the subject module’s display string for dragging and rotating it
eNB.cellInfo.constraintAreaMinX	double	-1m/0	The minimum X-coordinate of the area constraint, unconstrained by default
eNB.cellInfo.constraintAreaMinY	double	-1m/0	The minimum Y-coordinate of the area constraint, unconstrained by default
eNB.cellInfo.constraintAreaMaxX	double	1m/0	The maximum X-coordinate of the area constraint, unconstrained by default
eNB.cellInfo.constraintAreaMaxY	double	1m/0	The maximum Y-coordinate of the area constraint, unconstrained by default
eNB.cellInfo.beaconInterval	double	1s	Interval for sending broadcast messages (used for handover or DAS)
eNB.cellInfo.microCell	bool	false	Type of eNodeB (MICRO / MACRO) - valid only for eNodeBs
eNB.cellInfo.rbyDl	int	12	Number of sub-carriers per RB in DL
eNB.cellInfo.rbyUl	int	12	Number of sub-carriers per RB in UL
eNB.cellInfo.rbxDl	int	7	Number of OFDM symbols per slot in DL
eNB.cellInfo.rbxUl	int	7	Number of OFDM symbols per slot in UL
eNB.cellInfo.rbPilotDl	int	3	Number of pilot Resource Elements per RB in DL
eNB.cellInfo.rbPilotUl	int	0	Number of pilot Resource Elements per RB in UL
eNB.cellInfo.signalDl	int	1	Number of signaling symbols for each Resource Block in DL
eNB.cellInfo.signalUl	int	1	Number of signaling symbols for each Resource Block in UL
eNB.cellInfo.numPreferredBands	int	1	Number of preferred bands to use (relevant only in PREFERRED mode)
eNB.cellInfo.binderModule	string	“binder”
eNB.cellularNic.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.cellularNic.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
eNB.cellularNic.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
eNB.cellularNic.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
eNB.cellularNic.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
eNB.cellularNic.pcapRecorder ↗.fileFormat	string	“pcapng”
eNB.cellularNic.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
eNB.cellularNic.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
eNB.cellularNic.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
eNB.cellularNic.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
eNB.cellularNic.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
eNB.cellularNic.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
eNB.cellularNic.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
eNB.cellularNic.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
eNB.cellularNic.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
eNB.cellularNic.handoverPacketHolder.binderModule	string	“binder”
eNB.cellularNic.ip2nic.binderModule	string	“binder”
eNB.cellularNic.ip2nic.connectionControlModule	string	“^.rrc.connectionControl”	The node’s control-plane entry point, asked for a bearer on a lookup miss
eNB.cellularNic.ip2nic.isNr	bool	false	True for the NR leg (set by NrNicUe/NrNicEnb, or in the ini for a DC master eNB)
eNB.cellularNic.ip2nic.hasSdap	bool	false	When true, SDAP handles DRB/RLC assignment; Ip2Nic skips traffic classification
eNB.cellularNic.ip2nic.sessionType	string	“”	UE only: the type of the UE’s session (see LteUe), which the payload the NIC delivers up is of; set by the NIC
eNB.cellularNic.ip2nic.establishBearersOnDemand	bool	true	When false, a packet that finds no established bearer raises an error instead of establishing one (static bearers are established up front; see the staticDrbs parameter of BearerConfigurator)
eNB.cellularNic.ip2nic.d2dBinderModule	string	“d2dBinder”	The network’s D2dBinder, which holds the D2D state
eNB.cellularNic.rrc.registration.interfaceTableModule	string
eNB.cellularNic.rrc.registration.interfaceName	string	“cellular”
eNB.cellularNic.rrc.registration.routingTableModule	string
eNB.cellularNic.rrc.registration.binderModule	string	“binder”
eNB.cellularNic.rrc.registration.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point (see Rrc), told about a multicast group join
eNB.cellularNic.rrc.registration.sessionType	string	“”	UE only: the type of the UE’s session (see LteUe): a UE created during the run gets an IPv4 default route through the NIC only on an IP session, and the NIC of an Ethernet session is an Ethernet port; set by the NIC
eNB.cellularNic.rrc.bearerManagement.binderModule	string	“binder”	To reach a peer’s BearerManagement on RLF
eNB.cellularNic.rrc.bearerManagement.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point (see Rrc), which a torn-down bearer’s DRB identity goes back through
eNB.cellularNic.rrc.bearerManagement.t311	double	0s	RRC re-establishment cell-selection timer (0 => release-to-IDLE)
eNB.cellularNic.rrc.bearerManagement.t301	double	0.1s	RRC re-establishment (request -> complete) timer
eNB.cellularNic.rrc.bearerManagement.headerCompressedSize	int	-1B	Removed, an error if set: header compression is configured per bearer (the rohc field of BearerConfigurator’s bearer definitions)
eNB.cellularNic.rrc.bearerManagement.pdcpEntityModuleType	string	“simu5g.stack.pdcp.LtePdcpEntity”	PDCP entity types: the full PDCP entity is a compound (PdcpEntityBase, TX+RX sides plus the leg split/join stage of a multi-leg bearer); the instantiable types are its subclasses (LtePdcpEntity, NrPdcpEntity). At a DC secondary a bearer’s PDCP lives at the master, so the secondary installs an PdcpRelayEntity (tunnels PDUs to/from the master) in its place.
eNB.cellularNic.rrc.bearerManagement.pdcpRelayEntityModuleType	string	“simu5g.stack.pdcp.PdcpRelayEntity”
eNB.cellularNic.rrc.bearerManagement.dualConnectivityEnabled	bool	false	Set by the NIC; two-leg (split-capable) bearers
eNB.cellularNic.rrc.bearerManagement.rlcTmEntityModuleType	string	“simu5g.stack.rlc.RlcTmEntity”	RLC entity types (compound modules): lteRlc* = LTE-FI bearers (TS 36.322), nrRlc* = NR bearers (SI/SO wire format, TS 38.322)
eNB.cellularNic.rrc.bearerManagement.lteRlcUmEntityModuleType	string	“simu5g.stack.rlc.LteRlcUmEntity”
eNB.cellularNic.rrc.bearerManagement.lteRlcAmEntityModuleType	string	“simu5g.stack.rlc.LteRlcAmEntity”
eNB.cellularNic.rrc.bearerManagement.nrRlcUmEntityModuleType	string	“simu5g.stack.rlc.NrRlcUmEntity”
eNB.cellularNic.rrc.bearerManagement.nrRlcAmEntityModuleType	string	“simu5g.stack.rlc.NrRlcAmEntity”
eNB.cellularNic.rrc.bearerManagement.registrationModule	string	“^.registration”	Module references for accessing other stack layers
eNB.cellularNic.rrc.bearerManagement.drbTableModule	string	“^.drbTable”
eNB.cellularNic.rrc.bearerManagement.ip2nicModule	string	“^.^.ip2nic”
eNB.cellularNic.rrc.bearerManagement.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”	Attachment-ledger push target (UE only)
eNB.cellularNic.rrc.bearerManagement.pdcpMuxModule	string	“^.^.pdcpMux”
eNB.cellularNic.rrc.bearerManagement.pdcpDcMuxModule	string	“^.^.pdcpDcMux”
eNB.cellularNic.rrc.bearerManagement.d2dModeControllerModule	string	“^.d2dModeController”
eNB.cellularNic.rrc.bearerManagement.rlcMuxModule	string	“^.^.rlcMux”
eNB.cellularNic.rrc.bearerManagement.nrRlcMuxModule	string	“^.^.nrRlcMux”
eNB.cellularNic.rrc.bearerManagement.macModule	string	“^.^.mac”
eNB.cellularNic.rrc.bearerManagement.nrMacModule	string	“^.^.nrMac”
eNB.cellularNic.rrc.bearerManagement.sdapModule	string	“^.^.sdap”	Configuration push target; unresolvable (no SDAP on the NIC) = no pushes
eNB.cellularNic.rrc.bearerManagement.qosFlowClassifierModule	string	“^.^.qosFlowClassifier”	Uplink QFI rule push target; unresolvable (not a UE stack with SDAP) = no pushes
eNB.cellularNic.rrc.connectionControl.binderModule	string	“binder”
eNB.cellularNic.rrc.connectionControl.bearerConfiguratorModule	string	“bearerConfigurator”
eNB.cellularNic.rrc.connectionControl.coreControlModule	string	“coreControl”
eNB.cellularNic.rrc.connectionControl.bearerManagementModule	string	“^.bearerManagement”
eNB.cellularNic.rrc.connectionControl.macModule	string	“^.^.mac”
eNB.cellularNic.rrc.connectionControl.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”
eNB.cellularNic.rrc.connectionControl.gtpUserModule	string	“^.^.^.relay.gtpUser”
eNB.cellularNic.rrc.connectionControl.gtpUserX2Module	string	“^.^.^.gtpUserX2”
eNB.cellularNic.rrc.connectionControl.macNodeId	int		The base station’s node id; the NIC sets it from the node’s
eNB.cellularNic.rrc.connectionControl.gateway	string	“”	The node’s core network gateway, as its gateway parameter names it; ignored at a node not connected to a core network (a secondary node)
eNB.cellularNic.rrc.nrConnectionControl.dynamicCellAssociation	bool	false
eNB.cellularNic.rrc.nrConnectionControl.enableHandover	bool	false	Allows handovers in the UE
eNB.cellularNic.rrc.nrConnectionControl.isNr	bool		Whether this instance is associated with the NR or the LTE stack
eNB.cellularNic.rrc.nrConnectionControl.macNodeId	int		MacNodeId of the stack leg this controller belongs to (set by the NIC)
eNB.cellularNic.rrc.nrConnectionControl.sessionType	string		The type of the session the UE requests at connection setup (see LteUe), set by the NIC
eNB.cellularNic.rrc.nrConnectionControl.handoverLatency	double	50ms	Handover duration
eNB.cellularNic.rrc.nrConnectionControl.handoverDetachmentTime	double	handoverLatency > 0s ? handoverLatency/2 : 25ms
eNB.cellularNic.rrc.nrConnectionControl.handoverAttachmentTime	double	handoverLatency > 0s ? handoverLatency-handoverDetachmentTime : handoverDetachmentTime
eNB.cellularNic.rrc.nrConnectionControl.minRssiDefault	bool	true	Whether minRssi is taken from PhyPisaData instead of the minRssi parameter
eNB.cellularNic.rrc.nrConnectionControl.minRssi	double	-99.0dB	Configurable minimum threshold RSSI for attaching to an eNB (meaningful only if minRssiDefault==false)
eNB.cellularNic.rrc.nrConnectionControl.hysteresisFactor	double	10
eNB.cellularNic.rrc.nrConnectionControl.binderModule	string	“binder”
eNB.cellularNic.rrc.nrConnectionControl.macModule	string	“^.^.mac”
eNB.cellularNic.rrc.nrConnectionControl.bearerManagementModule	string	“^.bearerManagement”
eNB.cellularNic.rrc.nrConnectionControl.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”
eNB.cellularNic.rrc.nrConnectionControl.feedbackGeneratorModule	string	“^.^.dlFbGen”	TODO or “^.^.nrDlFbGen”
eNB.cellularNic.rrc.nrConnectionControl.otherConnectionControlModule	string	“”
eNB.cellularNic.rrc.nrConnectionControl.hasCollector	bool	false	True when node has a collector module (ueCollector/nrUeCollector) for this PHY module
eNB.cellularNic.rrc.d2dModeSelection.modeSelectionPeriod	double	1s
eNB.cellularNic.rrc.d2dModeSelection.binderModule	string	“binder”
eNB.cellularNic.rrc.d2dModeSelection.d2dBinderModule	string	“d2dBinder”	The network’s D2dBinder, which holds the D2D state
eNB.cellularNic.rrc.d2dModeSelection.macModule	string	“^.^.mac”
eNB.cellularNic.rrc.d2dModeSelection.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point, which knows the UEs handing over
eNB.cellularNic.rlcMux.bearerManagementModule	string	“^.rrc.bearerManagement”
eNB.cellularNic.phy.isNr	bool	false	True for the NR leg (set by NrNicUe/NrNicEnb on their PHY submodule)
eNB.cellularNic.phy.macNodeId	int		MacNodeId of the stack leg this PHY belongs to (set by the NIC)
eNB.cellularNic.phy.ueTxPower	double	26dBm
eNB.cellularNic.phy.eNodeBTxPower	double	46dBm
eNB.cellularNic.phy.microTxPower	double	30dBm
eNB.cellularNic.phy.txDirection	string	“OMNI”
eNB.cellularNic.phy.txAngle	double	0deg
eNB.cellularNic.phy.binderModule	string	“binder”
eNB.cellularNic.phy.channelModelModule	string	“^.channelModel[0]”	Set to “^.nrChannelModel[0]” on an NR leg, see NrNicUe
eNB.cellularNic.phy.enableHandover	bool	false	Marks this eNB as a handover target: its beacons are used by UEs for handover feasibility assessment. Requires enableBeacons=true (the default when handover is on); the module errors out at initialization if beacons are disabled while handover is enabled.
eNB.cellularNic.phy.enableBeacons	bool	enableHandover	Enables broadcasting periodic beacons (at cellInfo.beaconInterval). Beacons are the measurement signal UEs use both for handover feasibility assessment and for radio link monitoring (RLF detection), decoupled from enableHandover so radio link monitoring can run without handover. Defaults to enableHandover (beacons flow exactly when handover is enabled). cellInfo.beaconInterval must be positive: a zero/negative interval is an error – switch beacons off with enableBeacons=false.
eNB.cellularNic.phy.targetBler	double	0.001
eNB.cellularNic.packetFlowObserver.macModule	string	“^.mac”
eNB.cellularNic.packetFlowObserver.pdcpModule	string	“^”
eNB.cellularNic.packetFlowObserver.rlcModule	string	“^”
eNB.cellularNic.packetFlowObserver.isNrObserver	bool	false
eNB.cellularNic.packetFlowObserver.pfmType	string	“PacketFlowObserverEnb”
eNB.cellularNic.pdcpDcMux.bearerManagementModule	string	“^.rrc.bearerManagement”
eNB.cellularNic.x2Manager.interfaceTableModule	string
eNB.cellularNic.x2Manager.binderModule	string	“binder”
eNB.cellularNic.compManager.compNodeType	string	“COMP_CLIENT”
eNB.cellularNic.compManager.coordinatorId	int		ID of the coordinator node
eNB.cellularNic.compManager.clientList	object	[]	Space-separated list of client node identifiers
eNB.cellularNic.compManager.coordinationPeriod	double	0.001s	The time interval between two coordination events
eNB.cellularNic.compManager.binderModule	string	“binder”
eNB.cellularNic.handoverX2Forwarder.losslessHandover	bool	false
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.displayStringTextFormat	string	“p: {position}\nv: {velocity}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.subjectModule	string	“^”	The module path that determines the subject module, the motion of which this mobility model describes. The default value is the parent module
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.coordinateSystemModule	string	“”	The module path of the geographic coordinate system module; optional, empty disables geographic conversion (and the {geo_position} directive)
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.updateDisplayString	bool	true	Enables continuous update of the subject module’s position by modifying its display string
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMinX	double	-inf m	The minimum x position of the constraint area. It is unconstrained by default (negative infinity)
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMinY	double	-inf m	The minimum y position of the constraint area. It is unconstrained by default (negative infinity)
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMinZ	double	-inf m	The minimum z position of the constraint area. It is unconstrained by default (negative infinity)
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMaxX	double	inf m	The maximum x position of the constraint area. It is unconstrained by default (positive infinity)
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMaxY	double	inf m	The maximum y position of the constraint area. It is unconstrained by default (positive infinity)
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.constraintAreaMaxZ	double	inf m	The maximum z position of the constraint area. It is unconstrained by default (positive infinity)
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialX	double	uniform(this.constraintAreaMinX, this.constraintAreaMaxX)
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialY	double	uniform(this.constraintAreaMinY, this.constraintAreaMaxY)
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialZ	double	nanToZero(uniform(this.constraintAreaMinZ, this.constraintAreaMaxZ))
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialLatitude	double	nan deg
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialLongitude	double	nan deg
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialAltitude	double	0m
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialHeading	double	0deg
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialElevation	double	0deg
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initialBank	double	0deg
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.initFromDisplayString	bool	true	Enables one-time initialization from the subject module’s display string
eNB.cellularNic.bgTrafficGenerator.bgUE.mobility ↗.updateFromDisplayString	bool	true	Enables continuous update from the subject module’s display string for dragging and rotating it
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.computeAvgInterference	bool
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.enablePeriodicCqiUpdate	bool
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.useProbabilisticCqi	bool
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.backgroundTrafficManagerModule	string	“^.^.manager”
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.startTimeDl	double	-1s
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.startTimeUl	double	-1s
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.headerLen	int	33B
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.txPower	double	26dBm
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.fbPeriod	int	6tti
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.periodDl	double	uniform(10ms,50ms)
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.periodUl	double	uniform(10ms,50ms)
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.packetSizeDl	int	intuniform(20B,100B)
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.packetSizeUl	int	intuniform(20B,100B)
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.rtxRateDl	double	0.1
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.rtxDelayDl	double	0.006s
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.rtxRateUl	double	0.1
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.rtxDelayUl	double	0.006s
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.cqiMeanDl	double	15	These values are only considered when periodicCqi == false && computeAvgInterference == false
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.cqiMeanUl	double	15
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.cqiStddevDl	double	0
eNB.cellularNic.bgTrafficGenerator.bgUE.generator.cqiStddevUl	double	0
eNB.cellularNic.bgTrafficGenerator.manager.binderModule	string	“binder”
eNB.cellularNic.bgTrafficGenerator.manager.numBgUes	int
eNB.cellularNic.bgTrafficGenerator.manager.macModule	string	“^.^.mac”
eNB.cellularNic.bgTrafficGenerator.manager.phyModule	string	“^.^.phy”
eNB.cellularNic.bgTrafficGenerator.manager.enablePeriodicCqiUpdate	bool
eNB.cellularNic.bgTrafficGenerator.manager.computeAvgInterference	bool
eNB.pppIf ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.pppIf ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
eNB.pppIf ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
eNB.pppIf ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
eNB.pppIf ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
eNB.pppIf ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
eNB.pppIf ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
eNB.pppIf ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
eNB.pppIf ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
eNB.pppIf ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
eNB.pppIf ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
eNB.pppIf ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
eNB.pppIf ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
eNB.pppIf ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
eNB.pppIf ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
eNB.pppIf ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.pppIf ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
eNB.pppIf ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
eNB.pppIf ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
eNB.pppIf ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
eNB.pppIf ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
eNB.pppIf ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.pppIf ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.pppIf ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
eNB.pppIf ↗.ppp ↗.mtu	int	4470B
eNB.pppIf ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
eNB.pppIf ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
eNB.x2ppp ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.x2ppp ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
eNB.x2ppp ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
eNB.x2ppp ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
eNB.x2ppp ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
eNB.x2ppp ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
eNB.x2ppp ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
eNB.x2ppp ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
eNB.x2ppp ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
eNB.x2ppp ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
eNB.x2ppp ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
eNB.x2ppp ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
eNB.x2ppp ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
eNB.x2ppp ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
eNB.x2ppp ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
eNB.x2ppp ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.x2ppp ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
eNB.x2ppp ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
eNB.x2ppp ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
eNB.x2ppp ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
eNB.x2ppp ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
eNB.x2ppp ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.x2ppp ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.x2ppp ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
eNB.x2ppp ↗.ppp ↗.mtu	int	4470B
eNB.x2ppp ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
eNB.x2ppp ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
eNB.pppMEHostIf ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.pppMEHostIf ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
eNB.pppMEHostIf ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
eNB.pppMEHostIf ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
eNB.pppMEHostIf ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
eNB.pppMEHostIf ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
eNB.pppMEHostIf ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
eNB.pppMEHostIf ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
eNB.pppMEHostIf ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
eNB.pppMEHostIf ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
eNB.pppMEHostIf ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
eNB.pppMEHostIf ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
eNB.pppMEHostIf ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
eNB.pppMEHostIf ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
eNB.pppMEHostIf ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
eNB.pppMEHostIf ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.pppMEHostIf ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
eNB.pppMEHostIf ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
eNB.pppMEHostIf ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
eNB.pppMEHostIf ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
eNB.pppMEHostIf ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
eNB.pppMEHostIf ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.pppMEHostIf ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.pppMEHostIf ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
eNB.pppMEHostIf ↗.ppp ↗.mtu	int	4470B
eNB.pppMEHostIf ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
eNB.pppMEHostIf ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
eNB.ipv4 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.configurator ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv4 ↗.configurator ↗.routingTableModule	string
eNB.ipv4 ↗.configurator ↗.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
eNB.ipv4 ↗.configurator ↗.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
eNB.ipv4 ↗.routingTable ↗.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv4 ↗.routingTable ↗.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
eNB.ipv4 ↗.routingTable ↗.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
eNB.ipv4 ↗.routingTable ↗.forwarding	bool	true	Turns IP forwarding on/off
eNB.ipv4 ↗.routingTable ↗.multicastForwarding	bool	false	Turns multicast forwarding on/off
eNB.ipv4 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
eNB.ipv4 ↗.routingTable ↗.routingFile	string	“”	Routing table file name
eNB.ipv4 ↗.natTable ↗.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.natTable ↗.networkProtocolModule	string	“^.ip”
eNB.ipv4 ↗.natTable ↗.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
eNB.ipv4 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
eNB.ipv4 ↗.up ↗.forwardServiceRegistration	bool	true
eNB.ipv4 ↗.up ↗.forwardProtocolRegistration	bool	true
eNB.ipv4 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
eNB.ipv4 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
eNB.ipv4 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
eNB.ipv4 ↗.igmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.igmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv4 ↗.igmp ↗.routingTableModule	string
eNB.ipv4 ↗.igmp ↗.checksumMode	string	“declared”
eNB.ipv4 ↗.igmp ↗.enabled	bool	true
eNB.ipv4 ↗.igmp ↗.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
eNB.ipv4 ↗.igmp ↗.queryInterval	double	125s
eNB.ipv4 ↗.igmp ↗.queryResponseInterval	double	10s
eNB.ipv4 ↗.igmp ↗.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
eNB.ipv4 ↗.igmp ↗.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
eNB.ipv4 ↗.igmp ↗.startupQueryInterval	double	queryInterval / 4
eNB.ipv4 ↗.igmp ↗.startupQueryCount	int	robustnessVariable
eNB.ipv4 ↗.igmp ↗.lastMemberQueryInterval	double	1s
eNB.ipv4 ↗.igmp ↗.lastMemberQueryCount	int	robustnessVariable
eNB.ipv4 ↗.igmp ↗.unsolicitedReportInterval	double	10s
eNB.ipv4 ↗.icmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.icmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv4 ↗.icmp ↗.routingTableModule	string
eNB.ipv4 ↗.icmp ↗.checksumMode	string	“declared”
eNB.ipv4 ↗.icmp ↗.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
eNB.ipv4 ↗.mp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.mp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
eNB.ipv4 ↗.mp ↗.forwardServiceRegistration	bool	true
eNB.ipv4 ↗.mp ↗.forwardProtocolRegistration	bool	true
eNB.ipv4 ↗.mp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
eNB.ipv4 ↗.mp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
eNB.ipv4 ↗.mp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
eNB.ipv4 ↗.ip ↗.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.ip ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv4 ↗.ip ↗.routingTableModule	string
eNB.ipv4 ↗.ip ↗.arpModule	string
eNB.ipv4 ↗.ip ↗.icmpModule	string
eNB.ipv4 ↗.ip ↗.checksumMode	string	“declared”
eNB.ipv4 ↗.ip ↗.timeToLive	int	32
eNB.ipv4 ↗.ip ↗.multicastTimeToLive	int	32
eNB.ipv4 ↗.ip ↗.fragmentTimeout	double	60s
eNB.ipv4 ↗.ip ↗.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
eNB.ipv4 ↗.ip ↗.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
eNB.ipv4 ↗.ip ↗.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
eNB.ipv4 ↗.ip ↗.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
eNB.ipv4 ↗.ip ↗.maxLifetime	double	-1s	Packets older than the limit are discarded
eNB.ipv4 ↗.arp ↗.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.arp ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv4 ↗.arp ↗.routingTableModule	string
eNB.ipv4 ↗.arp ↗.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
eNB.ipv4 ↗.arp ↗.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
eNB.ipv4 ↗.arp ↗.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
eNB.ipv4 ↗.arp ↗.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
eNB.ipv4 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.ipsec ↗.networkProtocolModule	string	“^.ip”
eNB.ipv4 ↗.ipsec ↗.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
eNB.ipv4 ↗.ipsec ↗.interfaceTableModule	string
eNB.ipv4 ↗.ipsec ↗.spdModule	string	“^.spd”
eNB.ipv4 ↗.ipsec ↗.sadModule	string	“^.sad”
eNB.ipv4 ↗.ipsec ↗.spdConfig	xml
eNB.ipv4 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
eNB.ipv4 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
eNB.ipv4 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
eNB.ipv4 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
eNB.ipv4 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
eNB.ipv4 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
eNB.ipv4 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
eNB.ipv4 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
eNB.ipv4 ↗.ipsec ↗.espProtectInDelay	double	0.0s
eNB.ipv4 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv4 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
eNB.ipv4 ↗.lp ↗.forwardServiceRegistration	bool	true
eNB.ipv4 ↗.lp ↗.forwardProtocolRegistration	bool	true
eNB.ipv4 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
eNB.ipv4 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
eNB.ipv4 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
eNB.ipv6 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.configurator ↗.interfaceTableModule	string
eNB.ipv6 ↗.configurator ↗.routingTableModule	string
eNB.ipv6 ↗.configurator ↗.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
eNB.ipv6 ↗.configurator ↗.configureRoutingTable	bool	true
eNB.ipv6 ↗.routingTable ↗.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv6 ↗.routingTable ↗.routes	xml	xml(“<routingTable/>”)
eNB.ipv6 ↗.routingTable ↗.forwarding	bool	false
eNB.ipv6 ↗.routingTable ↗.isRouter	bool	this.forwarding
eNB.ipv6 ↗.routingTable ↗.multicastForwarding	bool	false
eNB.ipv6 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
eNB.ipv6 ↗.routingTable ↗.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
eNB.ipv6 ↗.routingTable ↗.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
eNB.ipv6 ↗.routingTable ↗.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
eNB.ipv6 ↗.routingTable ↗.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
eNB.ipv6 ↗.routingTable ↗.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
eNB.ipv6 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
eNB.ipv6 ↗.up ↗.forwardServiceRegistration	bool	true
eNB.ipv6 ↗.up ↗.forwardProtocolRegistration	bool	true
eNB.ipv6 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
eNB.ipv6 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
eNB.ipv6 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
eNB.ipv6 ↗.icmpv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.icmpv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv6 ↗.icmpv6 ↗.checksumMode	string	“declared”
eNB.ipv6 ↗.icmpv6 ↗.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
eNB.ipv6 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
eNB.ipv6 ↗.lp ↗.forwardServiceRegistration	bool	true
eNB.ipv6 ↗.lp ↗.forwardProtocolRegistration	bool	true
eNB.ipv6 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
eNB.ipv6 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
eNB.ipv6 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
eNB.ipv6 ↗.neighbourDiscovery ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.neighbourDiscovery ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv6 ↗.neighbourDiscovery ↗.checksumMode	string	“declared”
eNB.ipv6 ↗.neighbourDiscovery ↗.icmpv6Module	string
eNB.ipv6 ↗.neighbourDiscovery ↗.mipv6Module	string
eNB.ipv6 ↗.neighbourDiscovery ↗.routingTableModule	string
eNB.ipv6 ↗.neighbourDiscovery ↗.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
eNB.ipv6 ↗.neighbourDiscovery ↗.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
eNB.ipv6 ↗.neighbourDiscovery ↗.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
eNB.ipv6 ↗.neighbourDiscovery ↗.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
eNB.ipv6 ↗.neighbourDiscovery ↗.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
eNB.ipv6 ↗.neighbourDiscovery ↗.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
eNB.ipv6 ↗.neighbourDiscovery ↗.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
eNB.ipv6 ↗.neighbourDiscovery ↗.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
eNB.ipv6 ↗.neighbourDiscovery ↗.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
eNB.ipv6 ↗.neighbourDiscovery ↗.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
eNB.ipv6 ↗.ipv6 ↗.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.ipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv6 ↗.ipv6 ↗.routingTableModule	string
eNB.ipv6 ↗.ipv6 ↗.ipv6NeighbourDiscoveryModule	string
eNB.ipv6 ↗.ipv6 ↗.icmpv6Module	string
eNB.ipv6 ↗.ipv6 ↗.procDelay	double	0s
eNB.ipv6 ↗.ipv6 ↗.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
eNB.ipv6 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.ipsec ↗.interfaceTableModule	string
eNB.ipv6 ↗.ipsec ↗.spdModule	string	“^.spd”
eNB.ipv6 ↗.ipsec ↗.sadModule	string	“^.sad”
eNB.ipv6 ↗.ipsec ↗.spdConfig	xml
eNB.ipv6 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
eNB.ipv6 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
eNB.ipv6 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
eNB.ipv6 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
eNB.ipv6 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
eNB.ipv6 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
eNB.ipv6 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
eNB.ipv6 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
eNB.ipv6 ↗.ipsec ↗.espProtectInDelay	double	0.0s
eNB.ipv6 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.mipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.mipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.ipv6 ↗.mipv6 ↗.ipv6NeighbourDiscoveryModule	string
eNB.ipv6 ↗.mipv6 ↗.bindingUpdateListModule	string
eNB.ipv6 ↗.mipv6 ↗.bindingCacheModule	string
eNB.ipv6 ↗.mipv6 ↗.isHomeAgent	bool
eNB.ipv6 ↗.mipv6 ↗.isMobileNode	bool
eNB.ipv6 ↗.mipv6 ↗.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
eNB.ipv6 ↗.mipv6 ↗.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
eNB.ipv6 ↗.mipv6 ↗.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
eNB.ipv6 ↗.buList ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.bindingCache ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.pmipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.pmipv6 ↗.interfaceTableModule	string		path to the InterfaceTable module
eNB.ipv6 ↗.pmipv6 ↗.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
eNB.ipv6 ↗.pmipv6 ↗.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
eNB.ipv6 ↗.pmipv6 ↗.isMobileAccessGateway	bool	false
eNB.ipv6 ↗.pmipv6 ↗.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
eNB.ipv6 ↗.pmipv6 ↗.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
eNB.ipv6 ↗.pmipv6 ↗.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
eNB.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
eNB.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
eNB.ipv6 ↗.mld ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.ipv6 ↗.mld ↗.interfaceTableModule	string		path to the InterfaceTable module
eNB.ipv6 ↗.mld ↗.routingTableModule	string		path to the Ipv6RoutingTable module
eNB.ipv6 ↗.mld ↗.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
eNB.ipv6 ↗.mld ↗.enabled	bool	true	when false, MLD is inert on this node (see above)
eNB.ipv6 ↗.mld ↗.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
eNB.ipv6 ↗.mld ↗.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
eNB.ipv6 ↗.mld ↗.queryInterval	double	125s	querier: interval between periodic General Queries
eNB.ipv6 ↗.mld ↗.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
eNB.ipv6 ↗.mld ↗.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
eNB.ipv6 ↗.mld ↗.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
eNB.ipv6 ↗.mld ↗.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
eNB.ipv6 ↗.mld ↗.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
eNB.ipv6 ↗.mld ↗.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
eNB.udp ↗.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.udp ↗.interfaceTableModule	string		The path to the InterfaceTable module
eNB.udp ↗.checksumMode	string	“declared”
eNB.udp ↗.defaultMulticastLoop	bool	true
eNB.tcp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.tcp ↗.checksumMode	string	“declared”
eNB.tcp ↗.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
eNB.tcp ↗.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
eNB.tcp ↗.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
eNB.tcp ↗.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
eNB.tcp ↗.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
eNB.tcp ↗.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
eNB.tcp ↗.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
eNB.tcp ↗.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
eNB.tcp ↗.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
eNB.tcp ↗.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
eNB.tcp ↗.msl	int	120s	Maximum Segment Lifetime
eNB.tcp ↗.tcpAlgorithmClass	string	“TcpReno”
eNB.tcp ↗.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
eNB.tcp ↗.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
eNB.tcp ↗.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
eNB.tcp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
eNB.tcp ↗.ecnWillingness	bool	false	True if willing to use ECN
eNB.tcp ↗.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
eNB.tcp ↗.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
eNB.tcp ↗.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
eNB.x2App.client.displayStringTextFormat	string	“{socketState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.x2App.client.localAddress	string	“”	Comma-separated list of addresses
eNB.x2App.client.localPort	int	0	Port number to listen on
eNB.x2App.client.connectAddress	string		Server address (may be symbolic)
eNB.x2App.client.connectPort	int	5000	Port number to connect to
eNB.x2App.client.startTime	double	0s	Time the first session begins
eNB.x2App.client.numRequestsPerSession	int	1	Number of requests sent per session
eNB.x2App.client.numPacketsToReceive	int	0
eNB.x2App.client.requestLength	int	1452	Length of a request (bytes)
eNB.x2App.client.thinkTime	double	0s	Time gap between requests
eNB.x2App.client.waitToClose	double	0s	Time to wait between the last message sent and abort
eNB.x2App.client.reconnectInterval	double	0s	If the connection breaks, waits this much before trying to reconnect
eNB.x2App.client.inboundStreams	int	17
eNB.x2App.client.outboundStreams	int	1
eNB.x2App.client.echo	bool	false	Echoes received packages when true
eNB.x2App.client.ordered	bool	true
eNB.x2App.client.queueSize	int	0
eNB.x2App.client.prMethod	int	0	0=NONE, 1=PR_TTL, 2=PR_RTX, 3=PR_PRIO, 4=PR_STRRST
eNB.x2App.client.prValue	double	0	For PR-SCTP
eNB.x2App.client.streamReset	bool	false
eNB.x2App.client.streamRequestTime	double	0s
eNB.x2App.client.streamResetType	int	5	NO_RESET=5, RESET_OUTGOING=6, RESET_INCOMING=7, RESET_BOTH=8, SSN_TSN=9
eNB.x2App.client.streamToReset	int	0
eNB.x2App.client.stopTime	double	-1s	Time of finishing sending, negative values mean forever
eNB.x2App.client.primaryTime	double	0s
eNB.x2App.client.newPrimary	string	“”
eNB.x2App.client.streamRequestLengths	string	“”
eNB.x2App.client.streamRequestRatio	string	“”
eNB.x2App.client.streamPriorities	string	“”
eNB.x2App.client.finishEndsSimulation	bool	false
eNB.x2App.client.binderModule	string	“binder”
eNB.x2App.server.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.x2App.server.localAddress	string	“”	Comma-separated list of addresses
eNB.x2App.server.localPort	int	0	Port number to listen on
eNB.x2App.server.echo	bool	false	Echoes received packages when true
eNB.x2App.server.echoDelay	double	0s
eNB.x2App.server.delayFirstRead	double	0s
eNB.x2App.server.readingInterval	double	0s
eNB.x2App.server.messagesToPush	int	0
eNB.x2App.server.numPacketsToSendPerClient	int	0	Number of requests sent per session
eNB.x2App.server.numPacketsToReceivePerClient	int	1
eNB.x2App.server.requestLength	int	1452	Length of a request (bytes)
eNB.x2App.server.thinkTime	double	0s	Time gap between requests
eNB.x2App.server.waitToClose	double	0s	Time to wait between last message sent and abort
eNB.x2App.server.finishEndsSimulation	bool	false
eNB.x2App.server.ordered	bool	true
eNB.x2App.server.inboundStreams	int	17
eNB.x2App.server.outboundStreams	int	1
eNB.x2App.server.queueSize	int	0
eNB.x2App.server.prMethod	int	0	0=NONE, 1=PR_TTL, 2=PR_RTX, 3=PR_PRIO, 4=PR_STRRST
eNB.x2App.server.prValue	double	0	For PR-SCTP
eNB.x2App.server.streamReset	bool	false
eNB.x2App.server.streamRequestTime	double	0s
eNB.x2App.server.streamToReset	int	0
eNB.x2App.server.streamPriorities	string	“”
eNB.x2App.server.binderModule	string	“binder”
eNB.sctp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.sctp ↗.interfaceTableModule	string
eNB.sctp ↗.routingTableModule	string
eNB.sctp ↗.checksumMode	string	“declared”
eNB.sctp ↗.numGapReports	int	3
eNB.sctp ↗.rtoInitial	double	3s
eNB.sctp ↗.rtoMin	double	1s
eNB.sctp ↗.rtoMax	double	60s
eNB.sctp ↗.rtoAlpha	double	0.125
eNB.sctp ↗.rtoBeta	double	0.250
eNB.sctp ↗.maxBurst	int	4
eNB.sctp ↗.maxBurstVariant	string	“maxBurst”
eNB.sctp ↗.initialWindow	int	0
eNB.sctp ↗.assocMaxRetrans	int	10
eNB.sctp ↗.pathMaxRetrans	int	5
eNB.sctp ↗.maxInitRetrans	int	8
eNB.sctp ↗.sackPeriod	double	200ms
eNB.sctp ↗.sackFrequency	int	2
eNB.sctp ↗.reactivatePrimaryPath	bool	false
eNB.sctp ↗.sendQueueLimit	int	0
eNB.sctp ↗.validCookieLifetime	double	10s
eNB.sctp ↗.enableHeartbeats	bool	true
eNB.sctp ↗.hbInterval	double	30s
eNB.sctp ↗.sendHeartbeatsOnActivePaths	bool	false
eNB.sctp ↗.nagleEnabled	bool	true
eNB.sctp ↗.naglePoint	int	1468
eNB.sctp ↗.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
eNB.sctp ↗.fastRecoverySupported	bool	true
eNB.sctp ↗.sctpAlgorithmClass	string	“SctpAlg”
eNB.sctp ↗.ccModule	int	0	RFC4960=0
eNB.sctp ↗.osbWithHeader	bool	false
eNB.sctp ↗.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
eNB.sctp ↗.ssModule	int	0	ROUND_ROBIN=0
eNB.sctp ↗.arwnd	int	65535
eNB.sctp ↗.swsLimit	int	3000	Limit for SWS
eNB.sctp ↗.udpEncapsEnabled	bool	false
eNB.sctp ↗.natFriendly	bool	false
eNB.sctp ↗.bytesToAddPerRcvdChunk	int	0	For flow control
eNB.sctp ↗.bytesToAddPerPeerChunk	int	0	For flow control
eNB.sctp ↗.tellArwnd	bool	false	For flow control
eNB.sctp ↗.messageAcceptLimit	int	0	For flow control
eNB.sctp ↗.fairStart	double	0s
eNB.sctp ↗.fairStop	double	0s
eNB.sctp ↗.streamsToPaths	string	“”
eNB.sctp ↗.startEndToEndDelay	int	0
eNB.sctp ↗.stopEndToEndDelay	int	10
eNB.sctp ↗.throughputInterval	double	1
eNB.sctp ↗.auth	bool	false
eNB.sctp ↗.chunks	string	“”
eNB.sctp ↗.padding	bool	false
eNB.sctp ↗.addIP	bool	false
eNB.sctp ↗.addTime	double	0s
eNB.sctp ↗.addAddress	string	“”
eNB.sctp ↗.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
eNB.sctp ↗.packetDrop	bool	false
eNB.sctp ↗.sackNow	bool	false
eNB.sctp ↗.highSpeedCC	bool	false
eNB.sctp ↗.checkSackSeqNumber	bool	false
eNB.sctp ↗.nrSack	bool	false
eNB.sctp ↗.disableReneging	bool	false
eNB.sctp ↗.gapReportLimit	int	100000000
eNB.sctp ↗.gapListOptimizationVariant	string	“none”
eNB.sctp ↗.smartOverfullSACKHandling	bool	false
eNB.sctp ↗.allowQoSTracking	bool	false
eNB.sctp ↗.qosTrackingInterval	double	1.0s
eNB.sctp ↗.cmtSendAllVariant	string	“normal”
eNB.sctp ↗.cmtRetransmissionVariant	string	“normal”
eNB.sctp ↗.cmtCUCVariant	string	“normal”
eNB.sctp ↗.cmtBufferSplitVariant	string	“none”
eNB.sctp ↗.cmtBufferSplittingUsesOSB	bool	false
eNB.sctp ↗.cmtUseSFR	bool	true
eNB.sctp ↗.cmtUseDAC	bool	true
eNB.sctp ↗.cmtUseFRC	bool	true
eNB.sctp ↗.cmtSmartT3Reset	bool	true
eNB.sctp ↗.cmtSmartFastRTX	bool	true
eNB.sctp ↗.cmtSmartReneging	bool	false
eNB.sctp ↗.cmtSlowPathRTTUpdate	bool	false
eNB.sctp ↗.cmtChunkReschedulingVariant	string	“none”
eNB.sctp ↗.cmtChunkReschedulingThreshold	double	0.5
eNB.sctp ↗.cmtMovedChunksReduceCwnd	bool	true
eNB.sctp ↗.movedChunkFastRTXFactor	double	2.0
eNB.sctp ↗.cmtSackPath	string	“standard”
eNB.sctp ↗.strictCwndBooking	bool	false
eNB.sctp ↗.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
eNB.sctp ↗.cmtCCPathGroups	string	“”
eNB.sctp ↗.rpPathBlocking	bool	false
eNB.sctp ↗.rpScaleBlockingTimeout	bool	false
eNB.sctp ↗.rpMinCwnd	int	1
eNB.at ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.at ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
eNB.at ↗.forwardServiceRegistration	bool	true
eNB.at ↗.forwardProtocolRegistration	bool	true
eNB.at ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
eNB.at ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
eNB.at ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
eNB.tn ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.tn ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
eNB.tn ↗.forwardServiceRegistration	bool	true
eNB.tn ↗.forwardProtocolRegistration	bool	true
eNB.tn ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
eNB.tn ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
eNB.tn ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
eNB.nl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
eNB.nl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
eNB.nl ↗.forwardServiceRegistration	bool	true
eNB.nl ↗.forwardProtocolRegistration	bool	true
eNB.nl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
eNB.nl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
eNB.relay.trafficFlowFilter.binderModule	string	“binder”
eNB.relay.trafficFlowFilter.fastForwarding	bool	true
eNB.relay.gtpUser.binderModule	string	“binder”
eNB.relay.gtpUser.localPort	int	31
eNB.relay.gtpUser.tunnelPeerPort	int	31
eNB.gtpUserX2.binderModule	string	“binder”
eNB.gtpUserX2.localPort	int	32
eNB.gtpUserX2.tunnelPeerPort	int	32
ueCell.status ↗.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.status ↗.initialStatus	string	“UP”	Initial status of the network node
ueCell.mobility ↗.displayStringTextFormat	string	“p: {position}\nv: {velocity}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.mobility ↗.subjectModule	string	“^”	The module path that determines the subject module, the motion of which this mobility model describes. The default value is the parent module
ueCell.mobility ↗.coordinateSystemModule	string	“”	The module path of the geographic coordinate system module; optional, empty disables geographic conversion (and the {geo_position} directive)
ueCell.mobility ↗.updateDisplayString	bool	true	Enables continuous update of the subject module’s position by modifying its display string
ueCell.mobility ↗.constraintAreaMinX	double	-inf m	The minimum x position of the constraint area. It is unconstrained by default (negative infinity)
ueCell.mobility ↗.constraintAreaMinY	double	-inf m	The minimum y position of the constraint area. It is unconstrained by default (negative infinity)
ueCell.mobility ↗.constraintAreaMinZ	double	-inf m	The minimum z position of the constraint area. It is unconstrained by default (negative infinity)
ueCell.mobility ↗.constraintAreaMaxX	double	inf m	The maximum x position of the constraint area. It is unconstrained by default (positive infinity)
ueCell.mobility ↗.constraintAreaMaxY	double	inf m	The maximum y position of the constraint area. It is unconstrained by default (positive infinity)
ueCell.mobility ↗.constraintAreaMaxZ	double	inf m	The maximum z position of the constraint area. It is unconstrained by default (positive infinity)
ueCell.mobility ↗.initialX	double	uniform(this.constraintAreaMinX, this.constraintAreaMaxX)
ueCell.mobility ↗.initialY	double	uniform(this.constraintAreaMinY, this.constraintAreaMaxY)
ueCell.mobility ↗.initialZ	double	nanToZero(uniform(this.constraintAreaMinZ, this.constraintAreaMaxZ))
ueCell.mobility ↗.initialLatitude	double	nan deg
ueCell.mobility ↗.initialLongitude	double	nan deg
ueCell.mobility ↗.initialAltitude	double	0m
ueCell.mobility ↗.initialHeading	double	0deg
ueCell.mobility ↗.initialElevation	double	0deg
ueCell.mobility ↗.initialBank	double	0deg
ueCell.mobility ↗.initFromDisplayString	bool	true	Enables one-time initialization from the subject module’s display string
ueCell.mobility ↗.updateFromDisplayString	bool	true	Enables continuous update from the subject module’s display string for dragging and rotating it
ueCell.environment ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.environment ↗.initStage	int	0	Initialization stage for the setup command
ueCell.environment ↗.globalNamespace	bool	false	Create new network namespaces under /var/run/netns/ (Linux only)
ueCell.environment ↗.namespace	string	“”	Name of the host OS network namespace (optional) (Linux only)
ueCell.environment ↗.setupCommand	string	“”	A host OS system command
ueCell.environment ↗.teardownCommand	string	“”	A host OS system command
ueCell.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueCell.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueCell.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueCell.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueCell.pcapRecorder ↗.fileFormat	string	“pcapng”
ueCell.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueCell.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueCell.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueCell.pcapRecorder ↗.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
ueCell.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueCell.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueCell.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueCell.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueCell.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueCell.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueCell.interfaceTable ↗.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.interfaceTable ↗.displayAddresses	bool	false	Whether to display IP addresses on links
ueCell.cb ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.cb ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.cb ↗.forwardServiceRegistration	bool	true
ueCell.cb ↗.forwardProtocolRegistration	bool	true
ueCell.cb ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.cb ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.cb ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.bl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.bl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.bl ↗.forwardServiceRegistration	bool	true
ueCell.bl ↗.forwardProtocolRegistration	bool	true
ueCell.bl ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.bl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.bl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.ethernet ↗.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ethernet ↗.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
ueCell.ethernet ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ethernet ↗.fcsMode	string	“declared”
ueCell.ethernet ↗.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
ueCell.ethernet ↗.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
ueCell.li ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.li ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.li ↗.forwardServiceRegistration	bool	true
ueCell.li ↗.forwardProtocolRegistration	bool	true
ueCell.li ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.li ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.li ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.lo ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.lo ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueCell.lo ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueCell.lo ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueCell.lo ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueCell.lo ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueCell.lo ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueCell.lo ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueCell.lo ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueCell.lo ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueCell.lo ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueCell.lo ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueCell.lo ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueCell.lo ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueCell.lo ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueCell.lo ↗.lo ↗.displayStringTextFormat	string	“rcv:{numRcvdOK} snt:{numSent}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.lo ↗.lo ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.lo ↗.lo ↗.mtu	int	4470B
ueCell.wlan ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueCell.wlan ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueCell.wlan ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueCell.wlan ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueCell.wlan ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueCell.wlan ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueCell.wlan ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueCell.wlan ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueCell.wlan ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueCell.wlan ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueCell.wlan ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueCell.wlan ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueCell.wlan ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueCell.wlan ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueCell.wlan ↗.mib ↗.displayStringTextFormat	string	“Address: {address}{ssidStr}\n{modeStr}{stationTypeStr}{qosStr}{associatedStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.agent ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.agent ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.wlan ↗.agent ↗.mibModule	string
ueCell.wlan ↗.agent ↗.activeScan	bool	true	Selects between active and passive scanning
ueCell.wlan ↗.agent ↗.channelsToScan	string	“”	List of channel numbers to scan (space delimited); empty means all channels
ueCell.wlan ↗.agent ↗.probeDelay	double	100ms	Delay before sending a probe request during active scanning
ueCell.wlan ↗.agent ↗.minChannelTime	double	150ms	Min interval to spend on a channel during active scanning
ueCell.wlan ↗.agent ↗.maxChannelTime	double	300ms	Channel time for passive scanning, and max channel time for active scanning
ueCell.wlan ↗.agent ↗.authenticationTimeout	double	5s	Timeout for the authentication procedure
ueCell.wlan ↗.agent ↗.associationTimeout	double	5s	Timeout for the association procedure
ueCell.wlan ↗.agent ↗.startingTime	double	-1s	Agent starting time.
ueCell.wlan ↗.agent ↗.defaultSsid	string	“”	List of allowed SSIDs to connect to; leave empty for no filtering
ueCell.wlan ↗.mgmt ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mgmt ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.wlan ↗.mgmt ↗.numChannels	int	1	Number of channels to scan
ueCell.wlan ↗.mgmt ↗.mibModule	string
ueCell.wlan ↗.mgmt ↗.macModule	string		The path to the MAC module
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.pendingQueueModule	string	“^.pendingQueue”
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.originatorMacDataServiceModule	string	“^.^.originatorMacDataService”
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.ackHandlerModule	string	“^.^.ackHandler”
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
ueCell.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
ueCell.wlan ↗.mac ↗.dcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.fragmentationThreshold	int	1500B
ueCell.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.multicastFrameBitrate	double	-1bps
ueCell.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.responseAckFrameBitrate	double	-1bps
ueCell.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.responseCtsFrameBitrate	double	-1bps
ueCell.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameBitrate	double	-1bps	Fastest
ueCell.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameBandwidth	double	nan Hz	Unspecified by default
ueCell.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameNumSpatialStreams	int	-1	Unspecified by default
ueCell.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.mgmtFrameBitrate	double	-1bps	Fastest
ueCell.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.controlFrameBitrate	double	-1bps
ueCell.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.shortRetryLimit	int	7
ueCell.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.longRetryLimit	int	4
ueCell.wlan ↗.mac ↗.dcf ↗.originatorProtectionMechanism ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.originatorProtectionMechanism ↗.rateSelectionModule	string
ueCell.wlan ↗.mac ↗.dcf ↗.ackHandler ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.rateSelectionModule	string
ueCell.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.ackTimeout	double	-1s
ueCell.wlan ↗.mac ↗.dcf ↗.recipientAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.recipientAckPolicy ↗.rateSelectionModule	string
ueCell.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.rateSelectionModule	string
ueCell.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.ctsTimeout	double	-1s
ueCell.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.rtsThreshold	int	2346B
ueCell.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.rxModule	string
ueCell.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.rateSelectionModule	string
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.pendingQueueModule	string	“^.pendingQueue”
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.originatorMacDataServiceModule	string	“^.^.^.originatorMacDataService”
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.ackHandlerModule	string	“^.ackHandler”
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.ackHandler ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.txopProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.txopProcedure ↗.txopLimit	double	-1s
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.shortRetryLimit	int	7
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.longRetryLimit	int	4
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.collisionController ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.shortRetryLimit	int	7
ueCell.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.longRetryLimit	int	4
ueCell.wlan ↗.mac ↗.hcf ↗.hcca ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.subframeNumThreshold	int	-1	Minimum number of subframes needed to compose an A-MSDU. (-1 means it won’t be checked)
ueCell.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.aggregationLengthThreshold	int	-1	The minimum length for an aggregated payload necessary to create an A-MSDU (-1 means it won’t be checked).
ueCell.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.maxAMsduSize	int	4065	-1 means infinity
ueCell.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.qOsCheck	bool	true	Turns on/off the check of the presence of the QoS flag (false means off – this is needed for aggregation in DCF mode).
ueCell.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.mpduAggregationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.fragmentationThreshold	int	1500B
ueCell.wlan ↗.mac ↗.hcf ↗.singleProtectionMechanism ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.singleProtectionMechanism ↗.rateSelectionModule	string
ueCell.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.multicastFrameBitrate	double	-1bps
ueCell.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseAckFrameBitrate	double	-1bps
ueCell.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseBlockAckFrameBitrate	double	-1bps
ueCell.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseCtsFrameBitrate	double	-1bps
ueCell.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameBitrate	double	-1bps	Fastest
ueCell.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameBandwidth	double	nan Hz	Unspecified by default
ueCell.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameNumSpatialStreams	int	-1	Unspecified by default
ueCell.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.mgmtFrameBitrate	double	-1bps	Fastest
ueCell.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.controlFrameBitrate	double	-1bps
ueCell.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.rateSelectionModule	string
ueCell.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.blockAckReqThreshold	int	5
ueCell.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.maxBlockAckPolicyFrameLength	int	1000B
ueCell.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.blockAckTimeout	double	-1s
ueCell.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.ackTimeout	double	-1s
ueCell.wlan ↗.mac ↗.hcf ↗.recipientAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.recipientAckPolicy ↗.rateSelectionModule	string
ueCell.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.rateSelectionModule	string
ueCell.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.ctsTimeout	double	-1s
ueCell.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.rtsThreshold	int	2346B
ueCell.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.rxModule	string
ueCell.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.rateSelectionModule	string
ueCell.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.delayedAckPolicySupported	bool	false
ueCell.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.aMsduSupported	bool	true
ueCell.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.maximumAllowedBufferSize	int	64
ueCell.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
ueCell.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.delayedAckPolicySupported	bool	false
ueCell.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.aMsduSupported	bool	true
ueCell.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.maximumAllowedBufferSize	int	64
ueCell.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
ueCell.wlan ↗.mac ↗.ds ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.ds ↗.mibModule	string
ueCell.wlan ↗.mac ↗.rx ↗.displayStringTextFormat	string	“{rxStatus}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.tx ↗.displayStringTextFormat	string	“{txFramePrefix}{txState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.wlan ↗.mac ↗.tx ↗.rxModule	string
ueCell.ppp ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ppp ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueCell.ppp ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueCell.ppp ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueCell.ppp ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueCell.ppp ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueCell.ppp ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueCell.ppp ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueCell.ppp ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueCell.ppp ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueCell.ppp ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueCell.ppp ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueCell.ppp ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueCell.ppp ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueCell.ppp ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueCell.ppp ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ppp ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
ueCell.ppp ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
ueCell.ppp ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
ueCell.ppp ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
ueCell.ppp ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
ueCell.ppp ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ppp ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ppp ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
ueCell.ppp ↗.ppp ↗.mtu	int	4470B
ueCell.ppp ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
ueCell.ppp ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
ueCell.eth ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.eth ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueCell.eth ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueCell.eth ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueCell.eth ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueCell.eth ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueCell.eth ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueCell.eth ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueCell.eth ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueCell.eth ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueCell.eth ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueCell.eth ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueCell.eth ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueCell.eth ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueCell.eth ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueCell.tun ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.tun ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueCell.tun ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueCell.tun ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueCell.tun ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueCell.tun ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueCell.tun ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueCell.tun ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueCell.tun ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueCell.tun ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueCell.tun ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueCell.tun ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueCell.tun ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueCell.tun ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueCell.tun ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueCell.tun ↗.tun ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.tun ↗.tun ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.tun ↗.tun ↗.mtu	int	1500B
ueCell.virt ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.virt ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueCell.virt ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueCell.virt ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueCell.virt ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueCell.virt ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueCell.virt ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueCell.virt ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueCell.virt ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueCell.virt ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueCell.virt ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueCell.virt ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueCell.virt ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueCell.virt ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueCell.virt ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueCell.virt ↗.tunnel ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.virt ↗.tunnel ↗.interfaceTableModule	string
ueCell.virt ↗.tunnel ↗.realInterface	string
ueCell.virt ↗.tunnel ↗.protocol	string	vlanId != -1 ? “ieee8021qctag” : “”
ueCell.virt ↗.tunnel ↗.address	string	“copy”
ueCell.virt ↗.tunnel ↗.vlanId	int	-1
ueCell.virt ↗.tunnel ↗.steal	bool	vlanId != -1
ueCell.ipv4 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.configurator ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv4 ↗.configurator ↗.routingTableModule	string
ueCell.ipv4 ↗.configurator ↗.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
ueCell.ipv4 ↗.configurator ↗.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
ueCell.ipv4 ↗.routingTable ↗.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv4 ↗.routingTable ↗.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
ueCell.ipv4 ↗.routingTable ↗.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
ueCell.ipv4 ↗.routingTable ↗.forwarding	bool	true	Turns IP forwarding on/off
ueCell.ipv4 ↗.routingTable ↗.multicastForwarding	bool	false	Turns multicast forwarding on/off
ueCell.ipv4 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
ueCell.ipv4 ↗.routingTable ↗.routingFile	string	“”	Routing table file name
ueCell.ipv4 ↗.natTable ↗.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.natTable ↗.networkProtocolModule	string	“^.ip”
ueCell.ipv4 ↗.natTable ↗.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
ueCell.ipv4 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.ipv4 ↗.up ↗.forwardServiceRegistration	bool	true
ueCell.ipv4 ↗.up ↗.forwardProtocolRegistration	bool	true
ueCell.ipv4 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.ipv4 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.ipv4 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.ipv4 ↗.igmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.igmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv4 ↗.igmp ↗.routingTableModule	string
ueCell.ipv4 ↗.igmp ↗.checksumMode	string	“declared”
ueCell.ipv4 ↗.igmp ↗.enabled	bool	true
ueCell.ipv4 ↗.igmp ↗.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
ueCell.ipv4 ↗.igmp ↗.queryInterval	double	125s
ueCell.ipv4 ↗.igmp ↗.queryResponseInterval	double	10s
ueCell.ipv4 ↗.igmp ↗.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
ueCell.ipv4 ↗.igmp ↗.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
ueCell.ipv4 ↗.igmp ↗.startupQueryInterval	double	queryInterval / 4
ueCell.ipv4 ↗.igmp ↗.startupQueryCount	int	robustnessVariable
ueCell.ipv4 ↗.igmp ↗.lastMemberQueryInterval	double	1s
ueCell.ipv4 ↗.igmp ↗.lastMemberQueryCount	int	robustnessVariable
ueCell.ipv4 ↗.igmp ↗.unsolicitedReportInterval	double	10s
ueCell.ipv4 ↗.icmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.icmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv4 ↗.icmp ↗.routingTableModule	string
ueCell.ipv4 ↗.icmp ↗.checksumMode	string	“declared”
ueCell.ipv4 ↗.icmp ↗.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
ueCell.ipv4 ↗.mp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.mp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.ipv4 ↗.mp ↗.forwardServiceRegistration	bool	true
ueCell.ipv4 ↗.mp ↗.forwardProtocolRegistration	bool	true
ueCell.ipv4 ↗.mp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.ipv4 ↗.mp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.ipv4 ↗.mp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.ipv4 ↗.ip ↗.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.ip ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv4 ↗.ip ↗.routingTableModule	string
ueCell.ipv4 ↗.ip ↗.arpModule	string
ueCell.ipv4 ↗.ip ↗.icmpModule	string
ueCell.ipv4 ↗.ip ↗.checksumMode	string	“declared”
ueCell.ipv4 ↗.ip ↗.timeToLive	int	32
ueCell.ipv4 ↗.ip ↗.multicastTimeToLive	int	32
ueCell.ipv4 ↗.ip ↗.fragmentTimeout	double	60s
ueCell.ipv4 ↗.ip ↗.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
ueCell.ipv4 ↗.ip ↗.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
ueCell.ipv4 ↗.ip ↗.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
ueCell.ipv4 ↗.ip ↗.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
ueCell.ipv4 ↗.ip ↗.maxLifetime	double	-1s	Packets older than the limit are discarded
ueCell.ipv4 ↗.arp ↗.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.arp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv4 ↗.arp ↗.routingTableModule	string
ueCell.ipv4 ↗.arp ↗.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
ueCell.ipv4 ↗.arp ↗.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
ueCell.ipv4 ↗.arp ↗.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
ueCell.ipv4 ↗.arp ↗.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
ueCell.ipv4 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.ipsec ↗.networkProtocolModule	string	“^.ip”
ueCell.ipv4 ↗.ipsec ↗.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
ueCell.ipv4 ↗.ipsec ↗.interfaceTableModule	string
ueCell.ipv4 ↗.ipsec ↗.spdModule	string	“^.spd”
ueCell.ipv4 ↗.ipsec ↗.sadModule	string	“^.sad”
ueCell.ipv4 ↗.ipsec ↗.spdConfig	xml
ueCell.ipv4 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
ueCell.ipv4 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
ueCell.ipv4 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
ueCell.ipv4 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
ueCell.ipv4 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
ueCell.ipv4 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
ueCell.ipv4 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
ueCell.ipv4 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
ueCell.ipv4 ↗.ipsec ↗.espProtectInDelay	double	0.0s
ueCell.ipv4 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv4 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.ipv4 ↗.lp ↗.forwardServiceRegistration	bool	true
ueCell.ipv4 ↗.lp ↗.forwardProtocolRegistration	bool	true
ueCell.ipv4 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.ipv4 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.ipv4 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.ipv6 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.configurator ↗.interfaceTableModule	string
ueCell.ipv6 ↗.configurator ↗.routingTableModule	string
ueCell.ipv6 ↗.configurator ↗.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
ueCell.ipv6 ↗.configurator ↗.configureRoutingTable	bool	true
ueCell.ipv6 ↗.routingTable ↗.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv6 ↗.routingTable ↗.routes	xml	xml(“<routingTable/>”)
ueCell.ipv6 ↗.routingTable ↗.forwarding	bool	false
ueCell.ipv6 ↗.routingTable ↗.isRouter	bool	this.forwarding
ueCell.ipv6 ↗.routingTable ↗.multicastForwarding	bool	false
ueCell.ipv6 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
ueCell.ipv6 ↗.routingTable ↗.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
ueCell.ipv6 ↗.routingTable ↗.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
ueCell.ipv6 ↗.routingTable ↗.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
ueCell.ipv6 ↗.routingTable ↗.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
ueCell.ipv6 ↗.routingTable ↗.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
ueCell.ipv6 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.ipv6 ↗.up ↗.forwardServiceRegistration	bool	true
ueCell.ipv6 ↗.up ↗.forwardProtocolRegistration	bool	true
ueCell.ipv6 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.ipv6 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.ipv6 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.ipv6 ↗.icmpv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.icmpv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv6 ↗.icmpv6 ↗.checksumMode	string	“declared”
ueCell.ipv6 ↗.icmpv6 ↗.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
ueCell.ipv6 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.ipv6 ↗.lp ↗.forwardServiceRegistration	bool	true
ueCell.ipv6 ↗.lp ↗.forwardProtocolRegistration	bool	true
ueCell.ipv6 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.ipv6 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.ipv6 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.ipv6 ↗.neighbourDiscovery ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.neighbourDiscovery ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv6 ↗.neighbourDiscovery ↗.checksumMode	string	“declared”
ueCell.ipv6 ↗.neighbourDiscovery ↗.icmpv6Module	string
ueCell.ipv6 ↗.neighbourDiscovery ↗.mipv6Module	string
ueCell.ipv6 ↗.neighbourDiscovery ↗.routingTableModule	string
ueCell.ipv6 ↗.neighbourDiscovery ↗.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
ueCell.ipv6 ↗.neighbourDiscovery ↗.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
ueCell.ipv6 ↗.neighbourDiscovery ↗.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
ueCell.ipv6 ↗.neighbourDiscovery ↗.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
ueCell.ipv6 ↗.neighbourDiscovery ↗.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
ueCell.ipv6 ↗.neighbourDiscovery ↗.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
ueCell.ipv6 ↗.neighbourDiscovery ↗.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
ueCell.ipv6 ↗.neighbourDiscovery ↗.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
ueCell.ipv6 ↗.neighbourDiscovery ↗.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
ueCell.ipv6 ↗.neighbourDiscovery ↗.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
ueCell.ipv6 ↗.ipv6 ↗.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.ipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv6 ↗.ipv6 ↗.routingTableModule	string
ueCell.ipv6 ↗.ipv6 ↗.ipv6NeighbourDiscoveryModule	string
ueCell.ipv6 ↗.ipv6 ↗.icmpv6Module	string
ueCell.ipv6 ↗.ipv6 ↗.procDelay	double	0s
ueCell.ipv6 ↗.ipv6 ↗.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
ueCell.ipv6 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.ipsec ↗.interfaceTableModule	string
ueCell.ipv6 ↗.ipsec ↗.spdModule	string	“^.spd”
ueCell.ipv6 ↗.ipsec ↗.sadModule	string	“^.sad”
ueCell.ipv6 ↗.ipsec ↗.spdConfig	xml
ueCell.ipv6 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
ueCell.ipv6 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
ueCell.ipv6 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
ueCell.ipv6 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
ueCell.ipv6 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
ueCell.ipv6 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
ueCell.ipv6 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
ueCell.ipv6 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
ueCell.ipv6 ↗.ipsec ↗.espProtectInDelay	double	0.0s
ueCell.ipv6 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.mipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.mipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.ipv6 ↗.mipv6 ↗.ipv6NeighbourDiscoveryModule	string
ueCell.ipv6 ↗.mipv6 ↗.bindingUpdateListModule	string
ueCell.ipv6 ↗.mipv6 ↗.bindingCacheModule	string
ueCell.ipv6 ↗.mipv6 ↗.isHomeAgent	bool
ueCell.ipv6 ↗.mipv6 ↗.isMobileNode	bool
ueCell.ipv6 ↗.mipv6 ↗.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
ueCell.ipv6 ↗.mipv6 ↗.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
ueCell.ipv6 ↗.mipv6 ↗.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
ueCell.ipv6 ↗.buList ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.bindingCache ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.pmipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.pmipv6 ↗.interfaceTableModule	string		path to the InterfaceTable module
ueCell.ipv6 ↗.pmipv6 ↗.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
ueCell.ipv6 ↗.pmipv6 ↗.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
ueCell.ipv6 ↗.pmipv6 ↗.isMobileAccessGateway	bool	false
ueCell.ipv6 ↗.pmipv6 ↗.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
ueCell.ipv6 ↗.pmipv6 ↗.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
ueCell.ipv6 ↗.pmipv6 ↗.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
ueCell.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
ueCell.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
ueCell.ipv6 ↗.mld ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.ipv6 ↗.mld ↗.interfaceTableModule	string		path to the InterfaceTable module
ueCell.ipv6 ↗.mld ↗.routingTableModule	string		path to the Ipv6RoutingTable module
ueCell.ipv6 ↗.mld ↗.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
ueCell.ipv6 ↗.mld ↗.enabled	bool	true	when false, MLD is inert on this node (see above)
ueCell.ipv6 ↗.mld ↗.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
ueCell.ipv6 ↗.mld ↗.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
ueCell.ipv6 ↗.mld ↗.queryInterval	double	125s	querier: interval between periodic General Queries
ueCell.ipv6 ↗.mld ↗.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
ueCell.ipv6 ↗.mld ↗.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
ueCell.ipv6 ↗.mld ↗.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
ueCell.ipv6 ↗.mld ↗.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
ueCell.ipv6 ↗.mld ↗.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
ueCell.ipv6 ↗.mld ↗.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
ueCell.nl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.nl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.nl ↗.forwardServiceRegistration	bool	true
ueCell.nl ↗.forwardProtocolRegistration	bool	true
ueCell.nl ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.nl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.nl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.udp ↗.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.udp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueCell.udp ↗.checksumMode	string	“declared”
ueCell.udp ↗.defaultMulticastLoop	bool	true
ueCell.tcp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.tcp ↗.checksumMode	string	“declared”
ueCell.tcp ↗.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
ueCell.tcp ↗.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
ueCell.tcp ↗.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
ueCell.tcp ↗.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
ueCell.tcp ↗.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
ueCell.tcp ↗.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
ueCell.tcp ↗.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
ueCell.tcp ↗.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
ueCell.tcp ↗.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
ueCell.tcp ↗.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
ueCell.tcp ↗.msl	int	120s	Maximum Segment Lifetime
ueCell.tcp ↗.tcpAlgorithmClass	string	“TcpReno”
ueCell.tcp ↗.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
ueCell.tcp ↗.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
ueCell.tcp ↗.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
ueCell.tcp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
ueCell.tcp ↗.ecnWillingness	bool	false	True if willing to use ECN
ueCell.tcp ↗.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
ueCell.tcp ↗.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
ueCell.tcp ↗.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
ueCell.sctp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.sctp ↗.interfaceTableModule	string
ueCell.sctp ↗.routingTableModule	string
ueCell.sctp ↗.checksumMode	string	“declared”
ueCell.sctp ↗.numGapReports	int	3
ueCell.sctp ↗.rtoInitial	double	3s
ueCell.sctp ↗.rtoMin	double	1s
ueCell.sctp ↗.rtoMax	double	60s
ueCell.sctp ↗.rtoAlpha	double	0.125
ueCell.sctp ↗.rtoBeta	double	0.250
ueCell.sctp ↗.maxBurst	int	4
ueCell.sctp ↗.maxBurstVariant	string	“maxBurst”
ueCell.sctp ↗.initialWindow	int	0
ueCell.sctp ↗.assocMaxRetrans	int	10
ueCell.sctp ↗.pathMaxRetrans	int	5
ueCell.sctp ↗.maxInitRetrans	int	8
ueCell.sctp ↗.sackPeriod	double	200ms
ueCell.sctp ↗.sackFrequency	int	2
ueCell.sctp ↗.reactivatePrimaryPath	bool	false
ueCell.sctp ↗.sendQueueLimit	int	0
ueCell.sctp ↗.validCookieLifetime	double	10s
ueCell.sctp ↗.enableHeartbeats	bool	true
ueCell.sctp ↗.hbInterval	double	30s
ueCell.sctp ↗.sendHeartbeatsOnActivePaths	bool	false
ueCell.sctp ↗.nagleEnabled	bool	true
ueCell.sctp ↗.naglePoint	int	1468
ueCell.sctp ↗.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
ueCell.sctp ↗.fastRecoverySupported	bool	true
ueCell.sctp ↗.sctpAlgorithmClass	string	“SctpAlg”
ueCell.sctp ↗.ccModule	int	0	RFC4960=0
ueCell.sctp ↗.osbWithHeader	bool	false
ueCell.sctp ↗.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
ueCell.sctp ↗.ssModule	int	0	ROUND_ROBIN=0
ueCell.sctp ↗.arwnd	int	65535
ueCell.sctp ↗.swsLimit	int	3000	Limit for SWS
ueCell.sctp ↗.udpEncapsEnabled	bool	false
ueCell.sctp ↗.natFriendly	bool	false
ueCell.sctp ↗.bytesToAddPerRcvdChunk	int	0	For flow control
ueCell.sctp ↗.bytesToAddPerPeerChunk	int	0	For flow control
ueCell.sctp ↗.tellArwnd	bool	false	For flow control
ueCell.sctp ↗.messageAcceptLimit	int	0	For flow control
ueCell.sctp ↗.fairStart	double	0s
ueCell.sctp ↗.fairStop	double	0s
ueCell.sctp ↗.streamsToPaths	string	“”
ueCell.sctp ↗.startEndToEndDelay	int	0
ueCell.sctp ↗.stopEndToEndDelay	int	10
ueCell.sctp ↗.throughputInterval	double	1
ueCell.sctp ↗.auth	bool	false
ueCell.sctp ↗.chunks	string	“”
ueCell.sctp ↗.padding	bool	false
ueCell.sctp ↗.addIP	bool	false
ueCell.sctp ↗.addTime	double	0s
ueCell.sctp ↗.addAddress	string	“”
ueCell.sctp ↗.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
ueCell.sctp ↗.packetDrop	bool	false
ueCell.sctp ↗.sackNow	bool	false
ueCell.sctp ↗.highSpeedCC	bool	false
ueCell.sctp ↗.checkSackSeqNumber	bool	false
ueCell.sctp ↗.nrSack	bool	false
ueCell.sctp ↗.disableReneging	bool	false
ueCell.sctp ↗.gapReportLimit	int	100000000
ueCell.sctp ↗.gapListOptimizationVariant	string	“none”
ueCell.sctp ↗.smartOverfullSACKHandling	bool	false
ueCell.sctp ↗.allowQoSTracking	bool	false
ueCell.sctp ↗.qosTrackingInterval	double	1.0s
ueCell.sctp ↗.cmtSendAllVariant	string	“normal”
ueCell.sctp ↗.cmtRetransmissionVariant	string	“normal”
ueCell.sctp ↗.cmtCUCVariant	string	“normal”
ueCell.sctp ↗.cmtBufferSplitVariant	string	“none”
ueCell.sctp ↗.cmtBufferSplittingUsesOSB	bool	false
ueCell.sctp ↗.cmtUseSFR	bool	true
ueCell.sctp ↗.cmtUseDAC	bool	true
ueCell.sctp ↗.cmtUseFRC	bool	true
ueCell.sctp ↗.cmtSmartT3Reset	bool	true
ueCell.sctp ↗.cmtSmartFastRTX	bool	true
ueCell.sctp ↗.cmtSmartReneging	bool	false
ueCell.sctp ↗.cmtSlowPathRTTUpdate	bool	false
ueCell.sctp ↗.cmtChunkReschedulingVariant	string	“none”
ueCell.sctp ↗.cmtChunkReschedulingThreshold	double	0.5
ueCell.sctp ↗.cmtMovedChunksReduceCwnd	bool	true
ueCell.sctp ↗.movedChunkFastRTXFactor	double	2.0
ueCell.sctp ↗.cmtSackPath	string	“standard”
ueCell.sctp ↗.strictCwndBooking	bool	false
ueCell.sctp ↗.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
ueCell.sctp ↗.cmtCCPathGroups	string	“”
ueCell.sctp ↗.rpPathBlocking	bool	false
ueCell.sctp ↗.rpScaleBlockingTimeout	bool	false
ueCell.sctp ↗.rpMinCwnd	int	1
ueCell.quic ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.quic ↗.routingTableModule	string		Set by StandardHost.
ueCell.quic ↗.sendZeroRttTokenAsServer	bool	false
ueCell.quic ↗.congestionControl	string	“NewReno”	Sets the congestion control algorithm (NewReno or No).
ueCell.quic ↗.accurateIncreaseInNewRenoCongestionAvoidance	bool	true	For NewReno in Congestion Avoidance, if true, increases cwnd after cwnd-acked bytes; if false, increases cwnd on every acked packet by acked_bytes/cwnd.
ueCell.quic ↗.sendQueueLimit	int	64MB	Sets the limit of the send queue in bytes.
ueCell.quic ↗.sendQueueLowWaterRatio	double	.4	Defines the send queue low water mark relative to the limit.
ueCell.quic ↗.initialMaxData	int	15MB	Connection level flow control credit. Used as own and peer’s value.
ueCell.quic ↗.initialMaxStreamData	int	6MB	Stream level flow control credit for any stream (unidirectional, bidirectional local and remote). Used as own and peer’s value.
ueCell.quic ↗.maxDataFrameThreshold	double	0.5*initialMaxData	Defines when MaxDataFrame in ConnectionFlowControl will be send.
ueCell.quic ↗.maxStreamDataFrameThreshold	double	0.5*initialMaxStreamData	Defines when MaxStreamDataFrame in StreamFlowControl will be send.
ueCell.quic ↗.roundConsumedDataValue	bool	false	If true, FlowControlResponder rounds consumedData in streamRcvBuffer to the next packetSize.
ueCell.quic ↗.sendMaxDataFramesImmediately	bool	false	If true, a MAX_(STREAM)_DATA frame is sent immediately, after generation. Otherwise, sending the frame is delayed until the sending process starts due to another event.
ueCell.quic ↗.bundleAckForNonAckElicitingPackets	bool	false	If true, bundles ack for non-ack-eliciting packets in an outgoing packet.
ueCell.quic ↗.numReceivedAckElicitingsBeforeAck	int	2	Number of ack eliciting packets a receiver waits for, before it sends an ACK, immediately.
ueCell.quic ↗.useIBit	bool	false	If true, an ACK frame is sent immediately upon an ack-eliciting packet with the I-Bit set.
ueCell.quic ↗.useDplpmtud	bool	false	If true, uses DPLPMTUD (RFC8899) to determine the PMTU.
ueCell.quic ↗.maxPmtu	int	65535B	With useDplpmtud, it is used as upper limit for the PMTU search. Without useDplpmtud, the PMTU is set to the minimum of the MTU of the outgoing interface and this value.
ueCell.quic ↗.dplpmtudMinPmtu	int	0	Specifies the minimum PMTU to use (if 0, it uses 1200 B for IPv4 or 1280 B for IPv6 as minimum PMTU).
ueCell.quic ↗.dplpmtudMaxProbes	int	3	Specifies the number of probe packet sent for one candidate before given up.
ueCell.quic ↗.dplpmtudUsePtb	bool	true	If true, uses ICMP Packet Too Big (PTB) messages for DPLPMTUD.
ueCell.quic ↗.dplpmtudCandidateSequence	string	“OptBinary”	Specifies the sequence of candidates used for the search algorithm of DPLPMTUD (Up, Down, OptUp, Binary, OptBinary, Jump).
ueCell.quic ↗.skipPacketNumberForDplpmtudProbePackets	bool	false	Specifies whether to skip a packet number for a DPLPMTUD probe packet in order to avoid ack delay.
ueCell.quic ↗.useCwndForParallelProbes	int	0	If 0, no parallel probe packets; if 1, uses the availbale cwnd to send additional probe packets and if 2 prefers to send probe packets over other packets.
ueCell.quic ↗.sendDataDuringInitalDplpmtudBase	bool	true	If false, waits for DPLPMTUD switching initially to SEARCH before start sending application data.
ueCell.quic ↗.dplpmtudUsePmtuValidator	bool	true	If true, activates the PMTU Validator that trys to detect when the current PMTU estimation is larger than the actual PMTU.
ueCell.quic ↗.pmtuValidatorLostPacketsThreshold	int	2	Specifies the number of lost data packets before assuming a decreased PMTU.
ueCell.quic ↗.pmtuValidatorTimeThreshold	double	-1s	Specifies the time threshold between two lost packets. If negative, pmtuValidatorSrttFactorThreshold is used instead.
ueCell.quic ↗.pmtuValidatorSrttFactorThreshold	int	1	If pmtuValidatorTimeThreshold is negative, this number multiplied by SRTT is used instead.
ueCell.quic ↗.pmtuValidatorInvalidOnPersistentCongestion	int	1	If 0, disabled. If 1, the PMTU validator uses persistent congeation as signal for a decreased PMTU. If 2, only two consecutive persisten congestions used as signal. If 3, …
ueCell.quic ↗.reducePacketTimeThreshold	double	0s	Specifies after which time with no acks, packets with reduced size are sent. If zero, packet size reduction is disabled. If negative, reducePacketPtoFactorThreshold is used instead.
ueCell.quic ↗.reducePacketPtoFactorThreshold	int	3	If reducePacketTimeThreshold is negative, this number multiplied by PTO is used instead.
ueCell.tn ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.tn ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.tn ↗.forwardServiceRegistration	bool	true
ueCell.tn ↗.forwardProtocolRegistration	bool	true
ueCell.tn ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.tn ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.tn ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.at ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.at ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueCell.at ↗.forwardServiceRegistration	bool	true
ueCell.at ↗.forwardProtocolRegistration	bool	true
ueCell.at ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueCell.at ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueCell.at ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueCell.cellularNic.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.cellularNic.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueCell.cellularNic.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueCell.cellularNic.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueCell.cellularNic.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueCell.cellularNic.pcapRecorder ↗.fileFormat	string	“pcapng”
ueCell.cellularNic.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueCell.cellularNic.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueCell.cellularNic.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueCell.cellularNic.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueCell.cellularNic.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueCell.cellularNic.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueCell.cellularNic.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueCell.cellularNic.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueCell.cellularNic.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueCell.cellularNic.handoverPacketHolder.sessionType	string		The type of the UE’s session (see LteUe): the IP types parse the uplink datagram’s header for the modules after this one, the others carry the payload as is
ueCell.cellularNic.ip2nic.binderModule	string	“binder”
ueCell.cellularNic.ip2nic.connectionControlModule	string	“^.rrc.connectionControl”	The node’s control-plane entry point, asked for a bearer on a lookup miss
ueCell.cellularNic.ip2nic.isNr	bool	false	True for the NR leg (set by NrNicUe/NrNicEnb, or in the ini for a DC master eNB)
ueCell.cellularNic.ip2nic.hasSdap	bool	false	When true, SDAP handles DRB/RLC assignment; Ip2Nic skips traffic classification
ueCell.cellularNic.ip2nic.sessionType	string	“”	UE only: the type of the UE’s session (see LteUe), which the payload the NIC delivers up is of; set by the NIC
ueCell.cellularNic.ip2nic.establishBearersOnDemand	bool	true	When false, a packet that finds no established bearer raises an error instead of establishing one (static bearers are established up front; see the staticDrbs parameter of BearerConfigurator)
ueCell.cellularNic.ip2nic.d2dBinderModule	string	“d2dBinder”	The network’s D2dBinder, which holds the D2D state
ueCell.cellularNic.rrc.registration.interfaceTableModule	string
ueCell.cellularNic.rrc.registration.interfaceName	string	“cellular”
ueCell.cellularNic.rrc.registration.routingTableModule	string
ueCell.cellularNic.rrc.registration.binderModule	string	“binder”
ueCell.cellularNic.rrc.registration.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point (see Rrc), told about a multicast group join
ueCell.cellularNic.rrc.registration.sessionType	string	“”	UE only: the type of the UE’s session (see LteUe): a UE created during the run gets an IPv4 default route through the NIC only on an IP session, and the NIC of an Ethernet session is an Ethernet port; set by the NIC
ueCell.cellularNic.rrc.bearerManagement.binderModule	string	“binder”	To reach a peer’s BearerManagement on RLF
ueCell.cellularNic.rrc.bearerManagement.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point (see Rrc), which a torn-down bearer’s DRB identity goes back through
ueCell.cellularNic.rrc.bearerManagement.t311	double	0s	RRC re-establishment cell-selection timer (0 => release-to-IDLE)
ueCell.cellularNic.rrc.bearerManagement.t301	double	0.1s	RRC re-establishment (request -> complete) timer
ueCell.cellularNic.rrc.bearerManagement.headerCompressedSize	int	-1B	Removed, an error if set: header compression is configured per bearer (the rohc field of BearerConfigurator’s bearer definitions)
ueCell.cellularNic.rrc.bearerManagement.pdcpEntityModuleType	string	“simu5g.stack.pdcp.LtePdcpEntity”	PDCP entity types: the full PDCP entity is a compound (PdcpEntityBase, TX+RX sides plus the leg split/join stage of a multi-leg bearer); the instantiable types are its subclasses (LtePdcpEntity, NrPdcpEntity). At a DC secondary a bearer’s PDCP lives at the master, so the secondary installs an PdcpRelayEntity (tunnels PDUs to/from the master) in its place.
ueCell.cellularNic.rrc.bearerManagement.pdcpRelayEntityModuleType	string	“simu5g.stack.pdcp.PdcpRelayEntity”
ueCell.cellularNic.rrc.bearerManagement.dualConnectivityEnabled	bool	false	Set by the NIC; two-leg (split-capable) bearers
ueCell.cellularNic.rrc.bearerManagement.rlcTmEntityModuleType	string	“simu5g.stack.rlc.RlcTmEntity”	RLC entity types (compound modules): lteRlc* = LTE-FI bearers (TS 36.322), nrRlc* = NR bearers (SI/SO wire format, TS 38.322)
ueCell.cellularNic.rrc.bearerManagement.lteRlcUmEntityModuleType	string	“simu5g.stack.rlc.LteRlcUmEntity”
ueCell.cellularNic.rrc.bearerManagement.lteRlcAmEntityModuleType	string	“simu5g.stack.rlc.LteRlcAmEntity”
ueCell.cellularNic.rrc.bearerManagement.nrRlcUmEntityModuleType	string	“simu5g.stack.rlc.NrRlcUmEntity”
ueCell.cellularNic.rrc.bearerManagement.nrRlcAmEntityModuleType	string	“simu5g.stack.rlc.NrRlcAmEntity”
ueCell.cellularNic.rrc.bearerManagement.registrationModule	string	“^.registration”	Module references for accessing other stack layers
ueCell.cellularNic.rrc.bearerManagement.drbTableModule	string	“^.drbTable”
ueCell.cellularNic.rrc.bearerManagement.ip2nicModule	string	“^.^.ip2nic”
ueCell.cellularNic.rrc.bearerManagement.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”	Attachment-ledger push target (UE only)
ueCell.cellularNic.rrc.bearerManagement.pdcpMuxModule	string	“^.^.pdcpMux”
ueCell.cellularNic.rrc.bearerManagement.pdcpDcMuxModule	string	“^.^.pdcpDcMux”
ueCell.cellularNic.rrc.bearerManagement.d2dModeControllerModule	string	“^.d2dModeController”
ueCell.cellularNic.rrc.bearerManagement.rlcMuxModule	string	“^.^.rlcMux”
ueCell.cellularNic.rrc.bearerManagement.nrRlcMuxModule	string	“^.^.nrRlcMux”
ueCell.cellularNic.rrc.bearerManagement.macModule	string	“^.^.mac”
ueCell.cellularNic.rrc.bearerManagement.nrMacModule	string	“^.^.nrMac”
ueCell.cellularNic.rrc.bearerManagement.sdapModule	string	“^.^.sdap”	Configuration push target; unresolvable (no SDAP on the NIC) = no pushes
ueCell.cellularNic.rrc.bearerManagement.qosFlowClassifierModule	string	“^.^.qosFlowClassifier”	Uplink QFI rule push target; unresolvable (not a UE stack with SDAP) = no pushes
ueCell.cellularNic.rrc.connectionControl.binderModule	string	“binder”
ueCell.cellularNic.rrc.connectionControl.bearerConfiguratorModule	string	“bearerConfigurator”
ueCell.cellularNic.rrc.connectionControl.coreControlModule	string	“coreControl”
ueCell.cellularNic.rrc.connectionControl.bearerManagementModule	string	“^.bearerManagement”
ueCell.cellularNic.rrc.connectionControl.macModule	string	“^.^.mac”
ueCell.cellularNic.rrc.connectionControl.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”
ueCell.cellularNic.rrc.connectionControl.gtpUserModule	string	“^.^.^.relay.gtpUser”
ueCell.cellularNic.rrc.connectionControl.gtpUserX2Module	string	“^.^.^.gtpUserX2”
ueCell.cellularNic.rrc.connectionControl.macNodeId	int		The base station’s node id; the NIC sets it from the node’s
ueCell.cellularNic.rrc.connectionControl.gateway	string	“”	The node’s core network gateway, as its gateway parameter names it; ignored at a node not connected to a core network (a secondary node)
ueCell.cellularNic.rrc.nrConnectionControl.dynamicCellAssociation	bool	false
ueCell.cellularNic.rrc.nrConnectionControl.enableHandover	bool	false	Allows handovers in the UE
ueCell.cellularNic.rrc.nrConnectionControl.isNr	bool		Whether this instance is associated with the NR or the LTE stack
ueCell.cellularNic.rrc.nrConnectionControl.macNodeId	int		MacNodeId of the stack leg this controller belongs to (set by the NIC)
ueCell.cellularNic.rrc.nrConnectionControl.sessionType	string		The type of the session the UE requests at connection setup (see LteUe), set by the NIC
ueCell.cellularNic.rrc.nrConnectionControl.handoverLatency	double	50ms	Handover duration
ueCell.cellularNic.rrc.nrConnectionControl.handoverDetachmentTime	double	handoverLatency > 0s ? handoverLatency/2 : 25ms
ueCell.cellularNic.rrc.nrConnectionControl.handoverAttachmentTime	double	handoverLatency > 0s ? handoverLatency-handoverDetachmentTime : handoverDetachmentTime
ueCell.cellularNic.rrc.nrConnectionControl.minRssiDefault	bool	true	Whether minRssi is taken from PhyPisaData instead of the minRssi parameter
ueCell.cellularNic.rrc.nrConnectionControl.minRssi	double	-99.0dB	Configurable minimum threshold RSSI for attaching to an eNB (meaningful only if minRssiDefault==false)
ueCell.cellularNic.rrc.nrConnectionControl.hysteresisFactor	double	10
ueCell.cellularNic.rrc.nrConnectionControl.binderModule	string	“binder”
ueCell.cellularNic.rrc.nrConnectionControl.macModule	string	“^.^.mac”
ueCell.cellularNic.rrc.nrConnectionControl.bearerManagementModule	string	“^.bearerManagement”
ueCell.cellularNic.rrc.nrConnectionControl.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”
ueCell.cellularNic.rrc.nrConnectionControl.feedbackGeneratorModule	string	“^.^.dlFbGen”	TODO or “^.^.nrDlFbGen”
ueCell.cellularNic.rrc.nrConnectionControl.otherConnectionControlModule	string	“”
ueCell.cellularNic.rrc.nrConnectionControl.hasCollector	bool	false	True when node has a collector module (ueCollector/nrUeCollector) for this PHY module
ueCell.cellularNic.rrc.d2dModeSelection.modeSelectionPeriod	double	1s
ueCell.cellularNic.rrc.d2dModeSelection.binderModule	string	“binder”
ueCell.cellularNic.rrc.d2dModeSelection.d2dBinderModule	string	“d2dBinder”	The network’s D2dBinder, which holds the D2D state
ueCell.cellularNic.rrc.d2dModeSelection.macModule	string	“^.^.mac”
ueCell.cellularNic.rrc.d2dModeSelection.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point, which knows the UEs handing over
ueCell.cellularNic.rlcMux.bearerManagementModule	string	“^.rrc.bearerManagement”
ueCell.cellularNic.phy.isNr	bool	false	True for the NR leg (set by NrNicUe/NrNicEnb on their PHY submodule)
ueCell.cellularNic.phy.macNodeId	int		MacNodeId of the stack leg this PHY belongs to (set by the NIC)
ueCell.cellularNic.phy.ueTxPower	double	26dBm
ueCell.cellularNic.phy.eNodeBTxPower	double	46dBm
ueCell.cellularNic.phy.microTxPower	double	30dBm
ueCell.cellularNic.phy.txDirection	string	“OMNI”
ueCell.cellularNic.phy.txAngle	double	0deg
ueCell.cellularNic.phy.binderModule	string	“binder”
ueCell.cellularNic.phy.channelModelModule	string	“^.channelModel[0]”	Set to “^.nrChannelModel[0]” on an NR leg, see NrNicUe
ueCell.cellularNic.phy.connectionControlModule	string	“^.rrc.connectionControl”
ueCell.cellularNic.packetFlowObserver.macModule	string	“^.mac”
ueCell.cellularNic.packetFlowObserver.pdcpModule	string	“^”
ueCell.cellularNic.packetFlowObserver.rlcModule	string	“^”
ueCell.cellularNic.packetFlowObserver.isNrObserver	bool	false
ueCell.cellularNic.packetFlowObserver.pfmType	string	“PacketFlowObserverUe”
ueCell.cellularNic.dlFbGen.isNr	bool	false	True for the NR leg (set by NrNicUe on the nrDlFbGen submodule)
ueCell.cellularNic.dlFbGen.macNodeId	int		MacNodeId of the stack leg this generator belongs to (set by the NIC)
ueCell.cellularNic.dlFbGen.feedbackType	string	“ALLBANDS”	Can be ALLBANDS, PREFERRED, WIDEBAND
ueCell.cellularNic.dlFbGen.rbAllocationType	string	“localized”	Resource allocation type (“distributed” or “localized”)
ueCell.cellularNic.dlFbGen.fbPeriod	int	6tti	Period for Periodic feedback in TTI
ueCell.cellularNic.dlFbGen.fbDelay	int	1tti	Time interval between sensing and transmission in TTI
ueCell.cellularNic.dlFbGen.usePeriodic	bool	true	Whether periodic feedback is used in addition to aperiodic feedback
ueCell.cellularNic.dlFbGen.initialTxMode	string	“SINGLE_ANTENNA_PORT0”	Initial txMode (see LteCommon.h)
ueCell.cellularNic.dlFbGen.binderModule	string	“binder”
ueCell.cellularNic.dlFbGen.phyModule	string	“^.phy”
ueCell.macTable ↗.displayStringTextFormat	string	“addr: %a\nvlan: %v”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.macTable ↗.agingTime	double	120s
ueCell.macTable ↗.forwardingTable	object	[]
ueCell.macTable ↗.forwardingTableFile	string	“”
ueCell.macTable ↗.interfaceTableModule	string
ueCell.unstructuredApp.source ↗.displayStringTextFormat	string	“created %p pk (%l)”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.unstructuredApp.source ↗.packetNameFormat	string	“%a-%c”	See directives in module documentation
ueCell.unstructuredApp.source ↗.packetRepresentation	string	“byteCount”	Determines the chunk of the packet data
ueCell.unstructuredApp.source ↗.packetProtocol	string	“unknown”
ueCell.unstructuredApp.source ↗.packetLength	int
ueCell.unstructuredApp.source ↗.packetData	int	-1
ueCell.unstructuredApp.source ↗.attachCreationTimeTag	bool	true
ueCell.unstructuredApp.source ↗.attachIdentityTag	bool	true
ueCell.unstructuredApp.source ↗.attachDirectionTag	bool	true
ueCell.unstructuredApp.source ↗.clockModule	string	“”	Relative path of a module that implements IClock; optional
ueCell.unstructuredApp.source ↗.initialProductionOffset	double	-1s	Initial duration before which packets are not produced. When negative, then produce packet in initialize()
ueCell.unstructuredApp.source ↗.productionInterval	double		Elapsed time between subsequent packets pushed to the connected packet consumer
ueCell.unstructuredApp.source ↗.scheduleForAbsoluteTime	bool	true	When a clock is used, “relative” means that setting the clock will not affect the simulation time of the event
ueCell.unstructuredApp.sink ↗.displayStringTextFormat	string	“received %p pk (%l)”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueCell.unstructuredApp.sink ↗.clockModule	string	“”	Relative path of a module that implements IClock; optional
ueCell.unstructuredApp.sink ↗.initialConsumptionOffset	double	0s	Initial duration before which packets are not consumed
ueCell.unstructuredApp.sink ↗.consumptionInterval	double	0s	Elapsed time between subsequent packets allowed to be pushed by the connected packet producer, 0 means any number of packets can be pushed at the same simulation time
ueCell.unstructuredApp.sink ↗.scheduleForAbsoluteTime	bool	true	When a clock is used, “relative” means that setting the clock will not affect the simulation time of the event
ueCell.unstructuredApp.io.interfaceTableModule	string		Relative module path of the interface table
ueCell.unstructuredApp.io.interface	string	“cellular”	The name of the cellular NIC’s interface
ueD2D.status ↗.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.status ↗.initialStatus	string	“UP”	Initial status of the network node
ueD2D.mobility ↗.displayStringTextFormat	string	“p: {position}\nv: {velocity}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.mobility ↗.subjectModule	string	“^”	The module path that determines the subject module, the motion of which this mobility model describes. The default value is the parent module
ueD2D.mobility ↗.coordinateSystemModule	string	“”	The module path of the geographic coordinate system module; optional, empty disables geographic conversion (and the {geo_position} directive)
ueD2D.mobility ↗.updateDisplayString	bool	true	Enables continuous update of the subject module’s position by modifying its display string
ueD2D.mobility ↗.constraintAreaMinX	double	-inf m	The minimum x position of the constraint area. It is unconstrained by default (negative infinity)
ueD2D.mobility ↗.constraintAreaMinY	double	-inf m	The minimum y position of the constraint area. It is unconstrained by default (negative infinity)
ueD2D.mobility ↗.constraintAreaMinZ	double	-inf m	The minimum z position of the constraint area. It is unconstrained by default (negative infinity)
ueD2D.mobility ↗.constraintAreaMaxX	double	inf m	The maximum x position of the constraint area. It is unconstrained by default (positive infinity)
ueD2D.mobility ↗.constraintAreaMaxY	double	inf m	The maximum y position of the constraint area. It is unconstrained by default (positive infinity)
ueD2D.mobility ↗.constraintAreaMaxZ	double	inf m	The maximum z position of the constraint area. It is unconstrained by default (positive infinity)
ueD2D.mobility ↗.initialX	double	uniform(this.constraintAreaMinX, this.constraintAreaMaxX)
ueD2D.mobility ↗.initialY	double	uniform(this.constraintAreaMinY, this.constraintAreaMaxY)
ueD2D.mobility ↗.initialZ	double	nanToZero(uniform(this.constraintAreaMinZ, this.constraintAreaMaxZ))
ueD2D.mobility ↗.initialLatitude	double	nan deg
ueD2D.mobility ↗.initialLongitude	double	nan deg
ueD2D.mobility ↗.initialAltitude	double	0m
ueD2D.mobility ↗.initialHeading	double	0deg
ueD2D.mobility ↗.initialElevation	double	0deg
ueD2D.mobility ↗.initialBank	double	0deg
ueD2D.mobility ↗.initFromDisplayString	bool	true	Enables one-time initialization from the subject module’s display string
ueD2D.mobility ↗.updateFromDisplayString	bool	true	Enables continuous update from the subject module’s display string for dragging and rotating it
ueD2D.environment ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.environment ↗.initStage	int	0	Initialization stage for the setup command
ueD2D.environment ↗.globalNamespace	bool	false	Create new network namespaces under /var/run/netns/ (Linux only)
ueD2D.environment ↗.namespace	string	“”	Name of the host OS network namespace (optional) (Linux only)
ueD2D.environment ↗.setupCommand	string	“”	A host OS system command
ueD2D.environment ↗.teardownCommand	string	“”	A host OS system command
ueD2D.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueD2D.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueD2D.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueD2D.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueD2D.pcapRecorder ↗.fileFormat	string	“pcapng”
ueD2D.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueD2D.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueD2D.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueD2D.pcapRecorder ↗.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
ueD2D.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueD2D.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueD2D.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueD2D.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueD2D.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueD2D.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueD2D.interfaceTable ↗.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.interfaceTable ↗.displayAddresses	bool	false	Whether to display IP addresses on links
ueD2D.cb ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.cb ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.cb ↗.forwardServiceRegistration	bool	true
ueD2D.cb ↗.forwardProtocolRegistration	bool	true
ueD2D.cb ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.cb ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.cb ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.bl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.bl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.bl ↗.forwardServiceRegistration	bool	true
ueD2D.bl ↗.forwardProtocolRegistration	bool	true
ueD2D.bl ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.bl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.bl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.ethernet ↗.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ethernet ↗.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
ueD2D.ethernet ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ethernet ↗.fcsMode	string	“declared”
ueD2D.ethernet ↗.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
ueD2D.ethernet ↗.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
ueD2D.li ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.li ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.li ↗.forwardServiceRegistration	bool	true
ueD2D.li ↗.forwardProtocolRegistration	bool	true
ueD2D.li ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.li ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.li ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.lo ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.lo ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueD2D.lo ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueD2D.lo ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueD2D.lo ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueD2D.lo ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueD2D.lo ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueD2D.lo ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueD2D.lo ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueD2D.lo ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueD2D.lo ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueD2D.lo ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueD2D.lo ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueD2D.lo ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueD2D.lo ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueD2D.lo ↗.lo ↗.displayStringTextFormat	string	“rcv:{numRcvdOK} snt:{numSent}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.lo ↗.lo ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.lo ↗.lo ↗.mtu	int	4470B
ueD2D.wlan ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueD2D.wlan ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueD2D.wlan ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueD2D.wlan ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueD2D.wlan ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueD2D.wlan ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueD2D.wlan ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueD2D.wlan ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueD2D.wlan ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueD2D.wlan ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueD2D.wlan ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueD2D.wlan ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueD2D.wlan ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueD2D.wlan ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueD2D.wlan ↗.mib ↗.displayStringTextFormat	string	“Address: {address}{ssidStr}\n{modeStr}{stationTypeStr}{qosStr}{associatedStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.agent ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.agent ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.wlan ↗.agent ↗.mibModule	string
ueD2D.wlan ↗.agent ↗.activeScan	bool	true	Selects between active and passive scanning
ueD2D.wlan ↗.agent ↗.channelsToScan	string	“”	List of channel numbers to scan (space delimited); empty means all channels
ueD2D.wlan ↗.agent ↗.probeDelay	double	100ms	Delay before sending a probe request during active scanning
ueD2D.wlan ↗.agent ↗.minChannelTime	double	150ms	Min interval to spend on a channel during active scanning
ueD2D.wlan ↗.agent ↗.maxChannelTime	double	300ms	Channel time for passive scanning, and max channel time for active scanning
ueD2D.wlan ↗.agent ↗.authenticationTimeout	double	5s	Timeout for the authentication procedure
ueD2D.wlan ↗.agent ↗.associationTimeout	double	5s	Timeout for the association procedure
ueD2D.wlan ↗.agent ↗.startingTime	double	-1s	Agent starting time.
ueD2D.wlan ↗.agent ↗.defaultSsid	string	“”	List of allowed SSIDs to connect to; leave empty for no filtering
ueD2D.wlan ↗.mgmt ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mgmt ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.wlan ↗.mgmt ↗.numChannels	int	1	Number of channels to scan
ueD2D.wlan ↗.mgmt ↗.mibModule	string
ueD2D.wlan ↗.mgmt ↗.macModule	string		The path to the MAC module
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.pendingQueue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.pendingQueueModule	string	“^.pendingQueue”
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.originatorMacDataServiceModule	string	“^.^.originatorMacDataService”
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.inProgressFrames ↗.ackHandlerModule	string	“^.^.ackHandler”
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
ueD2D.wlan ↗.mac ↗.dcf ↗.channelAccess ↗.contention ↗.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
ueD2D.wlan ↗.mac ↗.dcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.fragmentationThreshold	int	1500B
ueD2D.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.multicastFrameBitrate	double	-1bps
ueD2D.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.responseAckFrameBitrate	double	-1bps
ueD2D.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.responseCtsFrameBitrate	double	-1bps
ueD2D.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameBitrate	double	-1bps	Fastest
ueD2D.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameBandwidth	double	nan Hz	Unspecified by default
ueD2D.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.dataFrameNumSpatialStreams	int	-1	Unspecified by default
ueD2D.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.mgmtFrameBitrate	double	-1bps	Fastest
ueD2D.wlan ↗.mac ↗.dcf ↗.rateSelection ↗.controlFrameBitrate	double	-1bps
ueD2D.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.shortRetryLimit	int	7
ueD2D.wlan ↗.mac ↗.dcf ↗.recoveryProcedure ↗.longRetryLimit	int	4
ueD2D.wlan ↗.mac ↗.dcf ↗.originatorProtectionMechanism ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.originatorProtectionMechanism ↗.rateSelectionModule	string
ueD2D.wlan ↗.mac ↗.dcf ↗.ackHandler ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.rateSelectionModule	string
ueD2D.wlan ↗.mac ↗.dcf ↗.originatorAckPolicy ↗.ackTimeout	double	-1s
ueD2D.wlan ↗.mac ↗.dcf ↗.recipientAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.recipientAckPolicy ↗.rateSelectionModule	string
ueD2D.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.rateSelectionModule	string
ueD2D.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.ctsTimeout	double	-1s
ueD2D.wlan ↗.mac ↗.dcf ↗.rtsPolicy ↗.rtsThreshold	int	2346B
ueD2D.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.rxModule	string
ueD2D.wlan ↗.mac ↗.dcf ↗.ctsPolicy ↗.rateSelectionModule	string
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.pendingQueue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.pendingQueueModule	string	“^.pendingQueue”
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.originatorMacDataServiceModule	string	“^.^.^.originatorMacDataService”
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.inProgressFrames ↗.ackHandlerModule	string	“^.ackHandler”
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.contention ↗.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.ackHandler ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.txopProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.txopProcedure ↗.txopLimit	double	-1s
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.shortRetryLimit	int	7
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.edcaf ↗.recoveryProcedure ↗.longRetryLimit	int	4
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.collisionController ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.shortRetryLimit	int	7
ueD2D.wlan ↗.mac ↗.hcf ↗.edca ↗.mgmtAndNonQoSRecoveryProcedure ↗.longRetryLimit	int	4
ueD2D.wlan ↗.mac ↗.hcf ↗.hcca ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.subframeNumThreshold	int	-1	Minimum number of subframes needed to compose an A-MSDU. (-1 means it won’t be checked)
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.aggregationLengthThreshold	int	-1	The minimum length for an aggregated payload necessary to create an A-MSDU (-1 means it won’t be checked).
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.maxAMsduSize	int	4065	-1 means infinity
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.msduAggregationPolicy ↗.qOsCheck	bool	true	Turns on/off the check of the presence of the QoS flag (false means off – this is needed for aggregation in DCF mode).
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.mpduAggregationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorMacDataService ↗.fragmentationPolicy ↗.fragmentationThreshold	int	1500B
ueD2D.wlan ↗.mac ↗.hcf ↗.singleProtectionMechanism ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.singleProtectionMechanism ↗.rateSelectionModule	string
ueD2D.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.multicastFrameBitrate	double	-1bps
ueD2D.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseAckFrameBitrate	double	-1bps
ueD2D.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseBlockAckFrameBitrate	double	-1bps
ueD2D.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.responseCtsFrameBitrate	double	-1bps
ueD2D.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameBitrate	double	-1bps	Fastest
ueD2D.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameBandwidth	double	nan Hz	Unspecified by default
ueD2D.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.dataFrameNumSpatialStreams	int	-1	Unspecified by default
ueD2D.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.mgmtFrameBitrate	double	-1bps	Fastest
ueD2D.wlan ↗.mac ↗.hcf ↗.rateSelection ↗.controlFrameBitrate	double	-1bps
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.rateSelectionModule	string
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.blockAckReqThreshold	int	5
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.maxBlockAckPolicyFrameLength	int	1000B
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.blockAckTimeout	double	-1s
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorAckPolicy ↗.ackTimeout	double	-1s
ueD2D.wlan ↗.mac ↗.hcf ↗.recipientAckPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.recipientAckPolicy ↗.rateSelectionModule	string
ueD2D.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.rateSelectionModule	string
ueD2D.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.ctsTimeout	double	-1s
ueD2D.wlan ↗.mac ↗.hcf ↗.rtsPolicy ↗.rtsThreshold	int	2346B
ueD2D.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.rxModule	string
ueD2D.wlan ↗.mac ↗.hcf ↗.ctsPolicy ↗.rateSelectionModule	string
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.delayedAckPolicySupported	bool	false
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.aMsduSupported	bool	true
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.maximumAllowedBufferSize	int	64
ueD2D.wlan ↗.mac ↗.hcf ↗.originatorBlockAckAgreementPolicy ↗.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
ueD2D.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.delayedAckPolicySupported	bool	false
ueD2D.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.aMsduSupported	bool	true
ueD2D.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.maximumAllowedBufferSize	int	64
ueD2D.wlan ↗.mac ↗.hcf ↗.recipientBlockAckAgreementPolicy ↗.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
ueD2D.wlan ↗.mac ↗.ds ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.ds ↗.mibModule	string
ueD2D.wlan ↗.mac ↗.rx ↗.displayStringTextFormat	string	“{rxStatus}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.tx ↗.displayStringTextFormat	string	“{txFramePrefix}{txState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.wlan ↗.mac ↗.tx ↗.rxModule	string
ueD2D.ppp ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ppp ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueD2D.ppp ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueD2D.ppp ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueD2D.ppp ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueD2D.ppp ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueD2D.ppp ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueD2D.ppp ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueD2D.ppp ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueD2D.ppp ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueD2D.ppp ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueD2D.ppp ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueD2D.ppp ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueD2D.ppp ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueD2D.ppp ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueD2D.ppp ↗.queue ↗.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ppp ↗.queue ↗.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
ueD2D.ppp ↗.queue ↗.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
ueD2D.ppp ↗.queue ↗.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
ueD2D.ppp ↗.queue ↗.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
ueD2D.ppp ↗.queue ↗.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
ueD2D.ppp ↗.ppp ↗.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ppp ↗.ppp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ppp ↗.ppp ↗.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
ueD2D.ppp ↗.ppp ↗.mtu	int	4470B
ueD2D.ppp ↗.ppp ↗.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
ueD2D.ppp ↗.ppp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
ueD2D.eth ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.eth ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueD2D.eth ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueD2D.eth ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueD2D.eth ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueD2D.eth ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueD2D.eth ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueD2D.eth ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueD2D.eth ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueD2D.eth ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueD2D.eth ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueD2D.eth ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueD2D.eth ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueD2D.eth ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueD2D.eth ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueD2D.tun ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.tun ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueD2D.tun ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueD2D.tun ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueD2D.tun ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueD2D.tun ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueD2D.tun ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueD2D.tun ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueD2D.tun ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueD2D.tun ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueD2D.tun ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueD2D.tun ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueD2D.tun ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueD2D.tun ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueD2D.tun ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueD2D.tun ↗.tun ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.tun ↗.tun ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.tun ↗.tun ↗.mtu	int	1500B
ueD2D.virt ↗.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.virt ↗.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueD2D.virt ↗.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueD2D.virt ↗.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueD2D.virt ↗.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueD2D.virt ↗.pcapRecorder ↗.fileFormat	string	“pcapng”
ueD2D.virt ↗.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueD2D.virt ↗.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueD2D.virt ↗.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueD2D.virt ↗.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueD2D.virt ↗.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueD2D.virt ↗.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueD2D.virt ↗.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueD2D.virt ↗.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueD2D.virt ↗.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueD2D.virt ↗.tunnel ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.virt ↗.tunnel ↗.interfaceTableModule	string
ueD2D.virt ↗.tunnel ↗.realInterface	string
ueD2D.virt ↗.tunnel ↗.protocol	string	vlanId != -1 ? “ieee8021qctag” : “”
ueD2D.virt ↗.tunnel ↗.address	string	“copy”
ueD2D.virt ↗.tunnel ↗.vlanId	int	-1
ueD2D.virt ↗.tunnel ↗.steal	bool	vlanId != -1
ueD2D.ipv4 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.configurator ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv4 ↗.configurator ↗.routingTableModule	string
ueD2D.ipv4 ↗.configurator ↗.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
ueD2D.ipv4 ↗.configurator ↗.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
ueD2D.ipv4 ↗.routingTable ↗.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv4 ↗.routingTable ↗.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
ueD2D.ipv4 ↗.routingTable ↗.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
ueD2D.ipv4 ↗.routingTable ↗.forwarding	bool	true	Turns IP forwarding on/off
ueD2D.ipv4 ↗.routingTable ↗.multicastForwarding	bool	false	Turns multicast forwarding on/off
ueD2D.ipv4 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
ueD2D.ipv4 ↗.routingTable ↗.routingFile	string	“”	Routing table file name
ueD2D.ipv4 ↗.natTable ↗.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.natTable ↗.networkProtocolModule	string	“^.ip”
ueD2D.ipv4 ↗.natTable ↗.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
ueD2D.ipv4 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.ipv4 ↗.up ↗.forwardServiceRegistration	bool	true
ueD2D.ipv4 ↗.up ↗.forwardProtocolRegistration	bool	true
ueD2D.ipv4 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.ipv4 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.ipv4 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.ipv4 ↗.igmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.igmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv4 ↗.igmp ↗.routingTableModule	string
ueD2D.ipv4 ↗.igmp ↗.checksumMode	string	“declared”
ueD2D.ipv4 ↗.igmp ↗.enabled	bool	true
ueD2D.ipv4 ↗.igmp ↗.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
ueD2D.ipv4 ↗.igmp ↗.queryInterval	double	125s
ueD2D.ipv4 ↗.igmp ↗.queryResponseInterval	double	10s
ueD2D.ipv4 ↗.igmp ↗.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
ueD2D.ipv4 ↗.igmp ↗.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
ueD2D.ipv4 ↗.igmp ↗.startupQueryInterval	double	queryInterval / 4
ueD2D.ipv4 ↗.igmp ↗.startupQueryCount	int	robustnessVariable
ueD2D.ipv4 ↗.igmp ↗.lastMemberQueryInterval	double	1s
ueD2D.ipv4 ↗.igmp ↗.lastMemberQueryCount	int	robustnessVariable
ueD2D.ipv4 ↗.igmp ↗.unsolicitedReportInterval	double	10s
ueD2D.ipv4 ↗.icmp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.icmp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv4 ↗.icmp ↗.routingTableModule	string
ueD2D.ipv4 ↗.icmp ↗.checksumMode	string	“declared”
ueD2D.ipv4 ↗.icmp ↗.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
ueD2D.ipv4 ↗.mp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.mp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.ipv4 ↗.mp ↗.forwardServiceRegistration	bool	true
ueD2D.ipv4 ↗.mp ↗.forwardProtocolRegistration	bool	true
ueD2D.ipv4 ↗.mp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.ipv4 ↗.mp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.ipv4 ↗.mp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.ipv4 ↗.ip ↗.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.ip ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv4 ↗.ip ↗.routingTableModule	string
ueD2D.ipv4 ↗.ip ↗.arpModule	string
ueD2D.ipv4 ↗.ip ↗.icmpModule	string
ueD2D.ipv4 ↗.ip ↗.checksumMode	string	“declared”
ueD2D.ipv4 ↗.ip ↗.timeToLive	int	32
ueD2D.ipv4 ↗.ip ↗.multicastTimeToLive	int	32
ueD2D.ipv4 ↗.ip ↗.fragmentTimeout	double	60s
ueD2D.ipv4 ↗.ip ↗.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
ueD2D.ipv4 ↗.ip ↗.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
ueD2D.ipv4 ↗.ip ↗.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
ueD2D.ipv4 ↗.ip ↗.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
ueD2D.ipv4 ↗.ip ↗.maxLifetime	double	-1s	Packets older than the limit are discarded
ueD2D.ipv4 ↗.arp ↗.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.arp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv4 ↗.arp ↗.routingTableModule	string
ueD2D.ipv4 ↗.arp ↗.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
ueD2D.ipv4 ↗.arp ↗.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
ueD2D.ipv4 ↗.arp ↗.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
ueD2D.ipv4 ↗.arp ↗.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
ueD2D.ipv4 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.ipsec ↗.networkProtocolModule	string	“^.ip”
ueD2D.ipv4 ↗.ipsec ↗.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
ueD2D.ipv4 ↗.ipsec ↗.interfaceTableModule	string
ueD2D.ipv4 ↗.ipsec ↗.spdModule	string	“^.spd”
ueD2D.ipv4 ↗.ipsec ↗.sadModule	string	“^.sad”
ueD2D.ipv4 ↗.ipsec ↗.spdConfig	xml
ueD2D.ipv4 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
ueD2D.ipv4 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
ueD2D.ipv4 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
ueD2D.ipv4 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
ueD2D.ipv4 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
ueD2D.ipv4 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
ueD2D.ipv4 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
ueD2D.ipv4 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
ueD2D.ipv4 ↗.ipsec ↗.espProtectInDelay	double	0.0s
ueD2D.ipv4 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv4 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.ipv4 ↗.lp ↗.forwardServiceRegistration	bool	true
ueD2D.ipv4 ↗.lp ↗.forwardProtocolRegistration	bool	true
ueD2D.ipv4 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.ipv4 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.ipv4 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.ipv6 ↗.configurator ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.configurator ↗.interfaceTableModule	string
ueD2D.ipv6 ↗.configurator ↗.routingTableModule	string
ueD2D.ipv6 ↗.configurator ↗.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
ueD2D.ipv6 ↗.configurator ↗.configureRoutingTable	bool	true
ueD2D.ipv6 ↗.routingTable ↗.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.routingTable ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv6 ↗.routingTable ↗.routes	xml	xml(“<routingTable/>”)
ueD2D.ipv6 ↗.routingTable ↗.forwarding	bool	false
ueD2D.ipv6 ↗.routingTable ↗.isRouter	bool	this.forwarding
ueD2D.ipv6 ↗.routingTable ↗.multicastForwarding	bool	false
ueD2D.ipv6 ↗.routingTable ↗.useAdminDist	bool	false	Use Cisco-like administrative distances
ueD2D.ipv6 ↗.routingTable ↗.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
ueD2D.ipv6 ↗.routingTable ↗.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
ueD2D.ipv6 ↗.routingTable ↗.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
ueD2D.ipv6 ↗.routingTable ↗.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
ueD2D.ipv6 ↗.routingTable ↗.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
ueD2D.ipv6 ↗.up ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.up ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.ipv6 ↗.up ↗.forwardServiceRegistration	bool	true
ueD2D.ipv6 ↗.up ↗.forwardProtocolRegistration	bool	true
ueD2D.ipv6 ↗.up ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.ipv6 ↗.up ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.ipv6 ↗.up ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.ipv6 ↗.icmpv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.icmpv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv6 ↗.icmpv6 ↗.checksumMode	string	“declared”
ueD2D.ipv6 ↗.icmpv6 ↗.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
ueD2D.ipv6 ↗.lp ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.lp ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.ipv6 ↗.lp ↗.forwardServiceRegistration	bool	true
ueD2D.ipv6 ↗.lp ↗.forwardProtocolRegistration	bool	true
ueD2D.ipv6 ↗.lp ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.ipv6 ↗.lp ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.ipv6 ↗.lp ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.ipv6 ↗.neighbourDiscovery ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.neighbourDiscovery ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv6 ↗.neighbourDiscovery ↗.checksumMode	string	“declared”
ueD2D.ipv6 ↗.neighbourDiscovery ↗.icmpv6Module	string
ueD2D.ipv6 ↗.neighbourDiscovery ↗.mipv6Module	string
ueD2D.ipv6 ↗.neighbourDiscovery ↗.routingTableModule	string
ueD2D.ipv6 ↗.neighbourDiscovery ↗.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
ueD2D.ipv6 ↗.neighbourDiscovery ↗.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
ueD2D.ipv6 ↗.neighbourDiscovery ↗.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
ueD2D.ipv6 ↗.neighbourDiscovery ↗.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
ueD2D.ipv6 ↗.neighbourDiscovery ↗.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
ueD2D.ipv6 ↗.neighbourDiscovery ↗.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
ueD2D.ipv6 ↗.neighbourDiscovery ↗.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
ueD2D.ipv6 ↗.neighbourDiscovery ↗.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
ueD2D.ipv6 ↗.neighbourDiscovery ↗.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
ueD2D.ipv6 ↗.neighbourDiscovery ↗.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
ueD2D.ipv6 ↗.ipv6 ↗.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.ipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv6 ↗.ipv6 ↗.routingTableModule	string
ueD2D.ipv6 ↗.ipv6 ↗.ipv6NeighbourDiscoveryModule	string
ueD2D.ipv6 ↗.ipv6 ↗.icmpv6Module	string
ueD2D.ipv6 ↗.ipv6 ↗.procDelay	double	0s
ueD2D.ipv6 ↗.ipv6 ↗.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
ueD2D.ipv6 ↗.ipsec ↗.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.ipsec ↗.interfaceTableModule	string
ueD2D.ipv6 ↗.ipsec ↗.spdModule	string	“^.spd”
ueD2D.ipv6 ↗.ipsec ↗.sadModule	string	“^.sad”
ueD2D.ipv6 ↗.ipsec ↗.spdConfig	xml
ueD2D.ipv6 ↗.ipsec ↗.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
ueD2D.ipv6 ↗.ipsec ↗.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
ueD2D.ipv6 ↗.ipsec ↗.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
ueD2D.ipv6 ↗.ipsec ↗.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
ueD2D.ipv6 ↗.ipsec ↗.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
ueD2D.ipv6 ↗.ipsec ↗.ahProtectOutDelay	double	0.0s
ueD2D.ipv6 ↗.ipsec ↗.ahProtectInDelay	double	0.0s
ueD2D.ipv6 ↗.ipsec ↗.espProtectOutDelay	double	0.0s
ueD2D.ipv6 ↗.ipsec ↗.espProtectInDelay	double	0.0s
ueD2D.ipv6 ↗.spd ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.sad ↗.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.mipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.mipv6 ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.ipv6 ↗.mipv6 ↗.ipv6NeighbourDiscoveryModule	string
ueD2D.ipv6 ↗.mipv6 ↗.bindingUpdateListModule	string
ueD2D.ipv6 ↗.mipv6 ↗.bindingCacheModule	string
ueD2D.ipv6 ↗.mipv6 ↗.isHomeAgent	bool
ueD2D.ipv6 ↗.mipv6 ↗.isMobileNode	bool
ueD2D.ipv6 ↗.mipv6 ↗.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
ueD2D.ipv6 ↗.mipv6 ↗.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
ueD2D.ipv6 ↗.mipv6 ↗.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
ueD2D.ipv6 ↗.buList ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.bindingCache ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.pmipv6 ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.pmipv6 ↗.interfaceTableModule	string		path to the InterfaceTable module
ueD2D.ipv6 ↗.pmipv6 ↗.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
ueD2D.ipv6 ↗.pmipv6 ↗.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
ueD2D.ipv6 ↗.pmipv6 ↗.isMobileAccessGateway	bool	false
ueD2D.ipv6 ↗.pmipv6 ↗.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
ueD2D.ipv6 ↗.pmipv6 ↗.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
ueD2D.ipv6 ↗.pmipv6 ↗.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
ueD2D.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
ueD2D.ipv6 ↗.pmipv6 ↗.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
ueD2D.ipv6 ↗.mld ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.ipv6 ↗.mld ↗.interfaceTableModule	string		path to the InterfaceTable module
ueD2D.ipv6 ↗.mld ↗.routingTableModule	string		path to the Ipv6RoutingTable module
ueD2D.ipv6 ↗.mld ↗.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
ueD2D.ipv6 ↗.mld ↗.enabled	bool	true	when false, MLD is inert on this node (see above)
ueD2D.ipv6 ↗.mld ↗.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
ueD2D.ipv6 ↗.mld ↗.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
ueD2D.ipv6 ↗.mld ↗.queryInterval	double	125s	querier: interval between periodic General Queries
ueD2D.ipv6 ↗.mld ↗.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
ueD2D.ipv6 ↗.mld ↗.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
ueD2D.ipv6 ↗.mld ↗.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
ueD2D.ipv6 ↗.mld ↗.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
ueD2D.ipv6 ↗.mld ↗.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
ueD2D.ipv6 ↗.mld ↗.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
ueD2D.nl ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.nl ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.nl ↗.forwardServiceRegistration	bool	true
ueD2D.nl ↗.forwardProtocolRegistration	bool	true
ueD2D.nl ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.nl ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.nl ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.udp ↗.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.udp ↗.interfaceTableModule	string		The path to the InterfaceTable module
ueD2D.udp ↗.checksumMode	string	“declared”
ueD2D.udp ↗.defaultMulticastLoop	bool	true
ueD2D.tcp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.tcp ↗.checksumMode	string	“declared”
ueD2D.tcp ↗.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
ueD2D.tcp ↗.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
ueD2D.tcp ↗.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
ueD2D.tcp ↗.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
ueD2D.tcp ↗.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
ueD2D.tcp ↗.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
ueD2D.tcp ↗.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
ueD2D.tcp ↗.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
ueD2D.tcp ↗.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
ueD2D.tcp ↗.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
ueD2D.tcp ↗.msl	int	120s	Maximum Segment Lifetime
ueD2D.tcp ↗.tcpAlgorithmClass	string	“TcpReno”
ueD2D.tcp ↗.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
ueD2D.tcp ↗.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
ueD2D.tcp ↗.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
ueD2D.tcp ↗.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
ueD2D.tcp ↗.ecnWillingness	bool	false	True if willing to use ECN
ueD2D.tcp ↗.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
ueD2D.tcp ↗.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
ueD2D.tcp ↗.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
ueD2D.sctp ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.sctp ↗.interfaceTableModule	string
ueD2D.sctp ↗.routingTableModule	string
ueD2D.sctp ↗.checksumMode	string	“declared”
ueD2D.sctp ↗.numGapReports	int	3
ueD2D.sctp ↗.rtoInitial	double	3s
ueD2D.sctp ↗.rtoMin	double	1s
ueD2D.sctp ↗.rtoMax	double	60s
ueD2D.sctp ↗.rtoAlpha	double	0.125
ueD2D.sctp ↗.rtoBeta	double	0.250
ueD2D.sctp ↗.maxBurst	int	4
ueD2D.sctp ↗.maxBurstVariant	string	“maxBurst”
ueD2D.sctp ↗.initialWindow	int	0
ueD2D.sctp ↗.assocMaxRetrans	int	10
ueD2D.sctp ↗.pathMaxRetrans	int	5
ueD2D.sctp ↗.maxInitRetrans	int	8
ueD2D.sctp ↗.sackPeriod	double	200ms
ueD2D.sctp ↗.sackFrequency	int	2
ueD2D.sctp ↗.reactivatePrimaryPath	bool	false
ueD2D.sctp ↗.sendQueueLimit	int	0
ueD2D.sctp ↗.validCookieLifetime	double	10s
ueD2D.sctp ↗.enableHeartbeats	bool	true
ueD2D.sctp ↗.hbInterval	double	30s
ueD2D.sctp ↗.sendHeartbeatsOnActivePaths	bool	false
ueD2D.sctp ↗.nagleEnabled	bool	true
ueD2D.sctp ↗.naglePoint	int	1468
ueD2D.sctp ↗.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
ueD2D.sctp ↗.fastRecoverySupported	bool	true
ueD2D.sctp ↗.sctpAlgorithmClass	string	“SctpAlg”
ueD2D.sctp ↗.ccModule	int	0	RFC4960=0
ueD2D.sctp ↗.osbWithHeader	bool	false
ueD2D.sctp ↗.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
ueD2D.sctp ↗.ssModule	int	0	ROUND_ROBIN=0
ueD2D.sctp ↗.arwnd	int	65535
ueD2D.sctp ↗.swsLimit	int	3000	Limit for SWS
ueD2D.sctp ↗.udpEncapsEnabled	bool	false
ueD2D.sctp ↗.natFriendly	bool	false
ueD2D.sctp ↗.bytesToAddPerRcvdChunk	int	0	For flow control
ueD2D.sctp ↗.bytesToAddPerPeerChunk	int	0	For flow control
ueD2D.sctp ↗.tellArwnd	bool	false	For flow control
ueD2D.sctp ↗.messageAcceptLimit	int	0	For flow control
ueD2D.sctp ↗.fairStart	double	0s
ueD2D.sctp ↗.fairStop	double	0s
ueD2D.sctp ↗.streamsToPaths	string	“”
ueD2D.sctp ↗.startEndToEndDelay	int	0
ueD2D.sctp ↗.stopEndToEndDelay	int	10
ueD2D.sctp ↗.throughputInterval	double	1
ueD2D.sctp ↗.auth	bool	false
ueD2D.sctp ↗.chunks	string	“”
ueD2D.sctp ↗.padding	bool	false
ueD2D.sctp ↗.addIP	bool	false
ueD2D.sctp ↗.addTime	double	0s
ueD2D.sctp ↗.addAddress	string	“”
ueD2D.sctp ↗.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
ueD2D.sctp ↗.packetDrop	bool	false
ueD2D.sctp ↗.sackNow	bool	false
ueD2D.sctp ↗.highSpeedCC	bool	false
ueD2D.sctp ↗.checkSackSeqNumber	bool	false
ueD2D.sctp ↗.nrSack	bool	false
ueD2D.sctp ↗.disableReneging	bool	false
ueD2D.sctp ↗.gapReportLimit	int	100000000
ueD2D.sctp ↗.gapListOptimizationVariant	string	“none”
ueD2D.sctp ↗.smartOverfullSACKHandling	bool	false
ueD2D.sctp ↗.allowQoSTracking	bool	false
ueD2D.sctp ↗.qosTrackingInterval	double	1.0s
ueD2D.sctp ↗.cmtSendAllVariant	string	“normal”
ueD2D.sctp ↗.cmtRetransmissionVariant	string	“normal”
ueD2D.sctp ↗.cmtCUCVariant	string	“normal”
ueD2D.sctp ↗.cmtBufferSplitVariant	string	“none”
ueD2D.sctp ↗.cmtBufferSplittingUsesOSB	bool	false
ueD2D.sctp ↗.cmtUseSFR	bool	true
ueD2D.sctp ↗.cmtUseDAC	bool	true
ueD2D.sctp ↗.cmtUseFRC	bool	true
ueD2D.sctp ↗.cmtSmartT3Reset	bool	true
ueD2D.sctp ↗.cmtSmartFastRTX	bool	true
ueD2D.sctp ↗.cmtSmartReneging	bool	false
ueD2D.sctp ↗.cmtSlowPathRTTUpdate	bool	false
ueD2D.sctp ↗.cmtChunkReschedulingVariant	string	“none”
ueD2D.sctp ↗.cmtChunkReschedulingThreshold	double	0.5
ueD2D.sctp ↗.cmtMovedChunksReduceCwnd	bool	true
ueD2D.sctp ↗.movedChunkFastRTXFactor	double	2.0
ueD2D.sctp ↗.cmtSackPath	string	“standard”
ueD2D.sctp ↗.strictCwndBooking	bool	false
ueD2D.sctp ↗.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
ueD2D.sctp ↗.cmtCCPathGroups	string	“”
ueD2D.sctp ↗.rpPathBlocking	bool	false
ueD2D.sctp ↗.rpScaleBlockingTimeout	bool	false
ueD2D.sctp ↗.rpMinCwnd	int	1
ueD2D.quic ↗.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.quic ↗.routingTableModule	string		Set by StandardHost.
ueD2D.quic ↗.sendZeroRttTokenAsServer	bool	false
ueD2D.quic ↗.congestionControl	string	“NewReno”	Sets the congestion control algorithm (NewReno or No).
ueD2D.quic ↗.accurateIncreaseInNewRenoCongestionAvoidance	bool	true	For NewReno in Congestion Avoidance, if true, increases cwnd after cwnd-acked bytes; if false, increases cwnd on every acked packet by acked_bytes/cwnd.
ueD2D.quic ↗.sendQueueLimit	int	64MB	Sets the limit of the send queue in bytes.
ueD2D.quic ↗.sendQueueLowWaterRatio	double	.4	Defines the send queue low water mark relative to the limit.
ueD2D.quic ↗.initialMaxData	int	15MB	Connection level flow control credit. Used as own and peer’s value.
ueD2D.quic ↗.initialMaxStreamData	int	6MB	Stream level flow control credit for any stream (unidirectional, bidirectional local and remote). Used as own and peer’s value.
ueD2D.quic ↗.maxDataFrameThreshold	double	0.5*initialMaxData	Defines when MaxDataFrame in ConnectionFlowControl will be send.
ueD2D.quic ↗.maxStreamDataFrameThreshold	double	0.5*initialMaxStreamData	Defines when MaxStreamDataFrame in StreamFlowControl will be send.
ueD2D.quic ↗.roundConsumedDataValue	bool	false	If true, FlowControlResponder rounds consumedData in streamRcvBuffer to the next packetSize.
ueD2D.quic ↗.sendMaxDataFramesImmediately	bool	false	If true, a MAX_(STREAM)_DATA frame is sent immediately, after generation. Otherwise, sending the frame is delayed until the sending process starts due to another event.
ueD2D.quic ↗.bundleAckForNonAckElicitingPackets	bool	false	If true, bundles ack for non-ack-eliciting packets in an outgoing packet.
ueD2D.quic ↗.numReceivedAckElicitingsBeforeAck	int	2	Number of ack eliciting packets a receiver waits for, before it sends an ACK, immediately.
ueD2D.quic ↗.useIBit	bool	false	If true, an ACK frame is sent immediately upon an ack-eliciting packet with the I-Bit set.
ueD2D.quic ↗.useDplpmtud	bool	false	If true, uses DPLPMTUD (RFC8899) to determine the PMTU.
ueD2D.quic ↗.maxPmtu	int	65535B	With useDplpmtud, it is used as upper limit for the PMTU search. Without useDplpmtud, the PMTU is set to the minimum of the MTU of the outgoing interface and this value.
ueD2D.quic ↗.dplpmtudMinPmtu	int	0	Specifies the minimum PMTU to use (if 0, it uses 1200 B for IPv4 or 1280 B for IPv6 as minimum PMTU).
ueD2D.quic ↗.dplpmtudMaxProbes	int	3	Specifies the number of probe packet sent for one candidate before given up.
ueD2D.quic ↗.dplpmtudUsePtb	bool	true	If true, uses ICMP Packet Too Big (PTB) messages for DPLPMTUD.
ueD2D.quic ↗.dplpmtudCandidateSequence	string	“OptBinary”	Specifies the sequence of candidates used for the search algorithm of DPLPMTUD (Up, Down, OptUp, Binary, OptBinary, Jump).
ueD2D.quic ↗.skipPacketNumberForDplpmtudProbePackets	bool	false	Specifies whether to skip a packet number for a DPLPMTUD probe packet in order to avoid ack delay.
ueD2D.quic ↗.useCwndForParallelProbes	int	0	If 0, no parallel probe packets; if 1, uses the availbale cwnd to send additional probe packets and if 2 prefers to send probe packets over other packets.
ueD2D.quic ↗.sendDataDuringInitalDplpmtudBase	bool	true	If false, waits for DPLPMTUD switching initially to SEARCH before start sending application data.
ueD2D.quic ↗.dplpmtudUsePmtuValidator	bool	true	If true, activates the PMTU Validator that trys to detect when the current PMTU estimation is larger than the actual PMTU.
ueD2D.quic ↗.pmtuValidatorLostPacketsThreshold	int	2	Specifies the number of lost data packets before assuming a decreased PMTU.
ueD2D.quic ↗.pmtuValidatorTimeThreshold	double	-1s	Specifies the time threshold between two lost packets. If negative, pmtuValidatorSrttFactorThreshold is used instead.
ueD2D.quic ↗.pmtuValidatorSrttFactorThreshold	int	1	If pmtuValidatorTimeThreshold is negative, this number multiplied by SRTT is used instead.
ueD2D.quic ↗.pmtuValidatorInvalidOnPersistentCongestion	int	1	If 0, disabled. If 1, the PMTU validator uses persistent congeation as signal for a decreased PMTU. If 2, only two consecutive persisten congestions used as signal. If 3, …
ueD2D.quic ↗.reducePacketTimeThreshold	double	0s	Specifies after which time with no acks, packets with reduced size are sent. If zero, packet size reduction is disabled. If negative, reducePacketPtoFactorThreshold is used instead.
ueD2D.quic ↗.reducePacketPtoFactorThreshold	int	3	If reducePacketTimeThreshold is negative, this number multiplied by PTO is used instead.
ueD2D.tn ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.tn ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.tn ↗.forwardServiceRegistration	bool	true
ueD2D.tn ↗.forwardProtocolRegistration	bool	true
ueD2D.tn ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.tn ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.tn ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.at ↗.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.at ↗.interfaceTableModule	string		Module path to the InterfaceTable ↗ module
ueD2D.at ↗.forwardServiceRegistration	bool	true
ueD2D.at ↗.forwardProtocolRegistration	bool	true
ueD2D.at ↗.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
ueD2D.at ↗.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
ueD2D.at ↗.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
ueD2D.cellularNic.pcapRecorder ↗.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.cellularNic.pcapRecorder ↗.verbose	bool	true	Whether to log packets on the module output
ueD2D.cellularNic.pcapRecorder ↗.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
ueD2D.cellularNic.pcapRecorder ↗.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
ueD2D.cellularNic.pcapRecorder ↗.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
ueD2D.cellularNic.pcapRecorder ↗.fileFormat	string	“pcapng”
ueD2D.cellularNic.pcapRecorder ↗.snaplen	int	65535	Maximum number of bytes to record per packet
ueD2D.cellularNic.pcapRecorder ↗.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
ueD2D.cellularNic.pcapRecorder ↗.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
ueD2D.cellularNic.pcapRecorder ↗.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
ueD2D.cellularNic.pcapRecorder ↗.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
ueD2D.cellularNic.pcapRecorder ↗.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
ueD2D.cellularNic.pcapRecorder ↗.packetFilter	object	“*”	Which packets are considered, matches all packets by default
ueD2D.cellularNic.pcapRecorder ↗.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
ueD2D.cellularNic.pcapRecorder ↗.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
ueD2D.cellularNic.handoverPacketHolder.sessionType	string		The type of the UE’s session (see LteUe): the IP types parse the uplink datagram’s header for the modules after this one, the others carry the payload as is
ueD2D.cellularNic.ip2nic.binderModule	string	“binder”
ueD2D.cellularNic.ip2nic.connectionControlModule	string	“^.rrc.connectionControl”	The node’s control-plane entry point, asked for a bearer on a lookup miss
ueD2D.cellularNic.ip2nic.isNr	bool	false	True for the NR leg (set by NrNicUe/NrNicEnb, or in the ini for a DC master eNB)
ueD2D.cellularNic.ip2nic.hasSdap	bool	false	When true, SDAP handles DRB/RLC assignment; Ip2Nic skips traffic classification
ueD2D.cellularNic.ip2nic.sessionType	string	“”	UE only: the type of the UE’s session (see LteUe), which the payload the NIC delivers up is of; set by the NIC
ueD2D.cellularNic.ip2nic.establishBearersOnDemand	bool	true	When false, a packet that finds no established bearer raises an error instead of establishing one (static bearers are established up front; see the staticDrbs parameter of BearerConfigurator)
ueD2D.cellularNic.ip2nic.d2dBinderModule	string	“d2dBinder”	The network’s D2dBinder, which holds the D2D state
ueD2D.cellularNic.rrc.registration.interfaceTableModule	string
ueD2D.cellularNic.rrc.registration.interfaceName	string	“cellular”
ueD2D.cellularNic.rrc.registration.routingTableModule	string
ueD2D.cellularNic.rrc.registration.binderModule	string	“binder”
ueD2D.cellularNic.rrc.registration.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point (see Rrc), told about a multicast group join
ueD2D.cellularNic.rrc.registration.sessionType	string	“”	UE only: the type of the UE’s session (see LteUe): a UE created during the run gets an IPv4 default route through the NIC only on an IP session, and the NIC of an Ethernet session is an Ethernet port; set by the NIC
ueD2D.cellularNic.rrc.bearerManagement.binderModule	string	“binder”	To reach a peer’s BearerManagement on RLF
ueD2D.cellularNic.rrc.bearerManagement.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point (see Rrc), which a torn-down bearer’s DRB identity goes back through
ueD2D.cellularNic.rrc.bearerManagement.t311	double	0s	RRC re-establishment cell-selection timer (0 => release-to-IDLE)
ueD2D.cellularNic.rrc.bearerManagement.t301	double	0.1s	RRC re-establishment (request -> complete) timer
ueD2D.cellularNic.rrc.bearerManagement.headerCompressedSize	int	-1B	Removed, an error if set: header compression is configured per bearer (the rohc field of BearerConfigurator’s bearer definitions)
ueD2D.cellularNic.rrc.bearerManagement.pdcpEntityModuleType	string	“simu5g.stack.pdcp.LtePdcpEntity”	PDCP entity types: the full PDCP entity is a compound (PdcpEntityBase, TX+RX sides plus the leg split/join stage of a multi-leg bearer); the instantiable types are its subclasses (LtePdcpEntity, NrPdcpEntity). At a DC secondary a bearer’s PDCP lives at the master, so the secondary installs an PdcpRelayEntity (tunnels PDUs to/from the master) in its place.
ueD2D.cellularNic.rrc.bearerManagement.pdcpRelayEntityModuleType	string	“simu5g.stack.pdcp.PdcpRelayEntity”
ueD2D.cellularNic.rrc.bearerManagement.dualConnectivityEnabled	bool	false	Set by the NIC; two-leg (split-capable) bearers
ueD2D.cellularNic.rrc.bearerManagement.rlcTmEntityModuleType	string	“simu5g.stack.rlc.RlcTmEntity”	RLC entity types (compound modules): lteRlc* = LTE-FI bearers (TS 36.322), nrRlc* = NR bearers (SI/SO wire format, TS 38.322)
ueD2D.cellularNic.rrc.bearerManagement.lteRlcUmEntityModuleType	string	“simu5g.stack.rlc.LteRlcUmEntity”
ueD2D.cellularNic.rrc.bearerManagement.lteRlcAmEntityModuleType	string	“simu5g.stack.rlc.LteRlcAmEntity”
ueD2D.cellularNic.rrc.bearerManagement.nrRlcUmEntityModuleType	string	“simu5g.stack.rlc.NrRlcUmEntity”
ueD2D.cellularNic.rrc.bearerManagement.nrRlcAmEntityModuleType	string	“simu5g.stack.rlc.NrRlcAmEntity”
ueD2D.cellularNic.rrc.bearerManagement.registrationModule	string	“^.registration”	Module references for accessing other stack layers
ueD2D.cellularNic.rrc.bearerManagement.drbTableModule	string	“^.drbTable”
ueD2D.cellularNic.rrc.bearerManagement.ip2nicModule	string	“^.^.ip2nic”
ueD2D.cellularNic.rrc.bearerManagement.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”	Attachment-ledger push target (UE only)
ueD2D.cellularNic.rrc.bearerManagement.pdcpMuxModule	string	“^.^.pdcpMux”
ueD2D.cellularNic.rrc.bearerManagement.pdcpDcMuxModule	string	“^.^.pdcpDcMux”
ueD2D.cellularNic.rrc.bearerManagement.d2dModeControllerModule	string	“^.d2dModeController”
ueD2D.cellularNic.rrc.bearerManagement.rlcMuxModule	string	“^.^.rlcMux”
ueD2D.cellularNic.rrc.bearerManagement.nrRlcMuxModule	string	“^.^.nrRlcMux”
ueD2D.cellularNic.rrc.bearerManagement.macModule	string	“^.^.mac”
ueD2D.cellularNic.rrc.bearerManagement.nrMacModule	string	“^.^.nrMac”
ueD2D.cellularNic.rrc.bearerManagement.sdapModule	string	“^.^.sdap”	Configuration push target; unresolvable (no SDAP on the NIC) = no pushes
ueD2D.cellularNic.rrc.bearerManagement.qosFlowClassifierModule	string	“^.^.qosFlowClassifier”	Uplink QFI rule push target; unresolvable (not a UE stack with SDAP) = no pushes
ueD2D.cellularNic.rrc.connectionControl.binderModule	string	“binder”
ueD2D.cellularNic.rrc.connectionControl.bearerConfiguratorModule	string	“bearerConfigurator”
ueD2D.cellularNic.rrc.connectionControl.coreControlModule	string	“coreControl”
ueD2D.cellularNic.rrc.connectionControl.bearerManagementModule	string	“^.bearerManagement”
ueD2D.cellularNic.rrc.connectionControl.macModule	string	“^.^.mac”
ueD2D.cellularNic.rrc.connectionControl.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”
ueD2D.cellularNic.rrc.connectionControl.gtpUserModule	string	“^.^.^.relay.gtpUser”
ueD2D.cellularNic.rrc.connectionControl.gtpUserX2Module	string	“^.^.^.gtpUserX2”
ueD2D.cellularNic.rrc.connectionControl.macNodeId	int		The base station’s node id; the NIC sets it from the node’s
ueD2D.cellularNic.rrc.connectionControl.gateway	string	“”	The node’s core network gateway, as its gateway parameter names it; ignored at a node not connected to a core network (a secondary node)
ueD2D.cellularNic.rrc.nrConnectionControl.dynamicCellAssociation	bool	false
ueD2D.cellularNic.rrc.nrConnectionControl.enableHandover	bool	false	Allows handovers in the UE
ueD2D.cellularNic.rrc.nrConnectionControl.isNr	bool		Whether this instance is associated with the NR or the LTE stack
ueD2D.cellularNic.rrc.nrConnectionControl.macNodeId	int		MacNodeId of the stack leg this controller belongs to (set by the NIC)
ueD2D.cellularNic.rrc.nrConnectionControl.sessionType	string		The type of the session the UE requests at connection setup (see LteUe), set by the NIC
ueD2D.cellularNic.rrc.nrConnectionControl.handoverLatency	double	50ms	Handover duration
ueD2D.cellularNic.rrc.nrConnectionControl.handoverDetachmentTime	double	handoverLatency > 0s ? handoverLatency/2 : 25ms
ueD2D.cellularNic.rrc.nrConnectionControl.handoverAttachmentTime	double	handoverLatency > 0s ? handoverLatency-handoverDetachmentTime : handoverDetachmentTime
ueD2D.cellularNic.rrc.nrConnectionControl.minRssiDefault	bool	true	Whether minRssi is taken from PhyPisaData instead of the minRssi parameter
ueD2D.cellularNic.rrc.nrConnectionControl.minRssi	double	-99.0dB	Configurable minimum threshold RSSI for attaching to an eNB (meaningful only if minRssiDefault==false)
ueD2D.cellularNic.rrc.nrConnectionControl.hysteresisFactor	double	10
ueD2D.cellularNic.rrc.nrConnectionControl.binderModule	string	“binder”
ueD2D.cellularNic.rrc.nrConnectionControl.macModule	string	“^.^.mac”
ueD2D.cellularNic.rrc.nrConnectionControl.bearerManagementModule	string	“^.bearerManagement”
ueD2D.cellularNic.rrc.nrConnectionControl.handoverPacketHolderModule	string	“^.^.handoverPacketHolder”
ueD2D.cellularNic.rrc.nrConnectionControl.feedbackGeneratorModule	string	“^.^.dlFbGen”	TODO or “^.^.nrDlFbGen”
ueD2D.cellularNic.rrc.nrConnectionControl.otherConnectionControlModule	string	“”
ueD2D.cellularNic.rrc.nrConnectionControl.hasCollector	bool	false	True when node has a collector module (ueCollector/nrUeCollector) for this PHY module
ueD2D.cellularNic.rrc.d2dModeSelection.modeSelectionPeriod	double	1s
ueD2D.cellularNic.rrc.d2dModeSelection.binderModule	string	“binder”
ueD2D.cellularNic.rrc.d2dModeSelection.d2dBinderModule	string	“d2dBinder”	The network’s D2dBinder, which holds the D2D state
ueD2D.cellularNic.rrc.d2dModeSelection.macModule	string	“^.^.mac”
ueD2D.cellularNic.rrc.d2dModeSelection.connectionControlModule	string	“^.connectionControl”	The node’s control-plane entry point, which knows the UEs handing over
ueD2D.cellularNic.rlcMux.bearerManagementModule	string	“^.rrc.bearerManagement”
ueD2D.cellularNic.phy.isNr	bool	false	True for the NR leg (set by NrNicUe/NrNicEnb on their PHY submodule)
ueD2D.cellularNic.phy.macNodeId	int		MacNodeId of the stack leg this PHY belongs to (set by the NIC)
ueD2D.cellularNic.phy.ueTxPower	double	26dBm
ueD2D.cellularNic.phy.eNodeBTxPower	double	46dBm
ueD2D.cellularNic.phy.microTxPower	double	30dBm
ueD2D.cellularNic.phy.txDirection	string	“OMNI”
ueD2D.cellularNic.phy.txAngle	double	0deg
ueD2D.cellularNic.phy.binderModule	string	“binder”
ueD2D.cellularNic.phy.channelModelModule	string	“^.channelModel[0]”	Set to “^.nrChannelModel[0]” on an NR leg, see NrNicUe
ueD2D.cellularNic.phy.connectionControlModule	string	“^.rrc.connectionControl”
ueD2D.cellularNic.packetFlowObserver.macModule	string	“^.mac”
ueD2D.cellularNic.packetFlowObserver.pdcpModule	string	“^”
ueD2D.cellularNic.packetFlowObserver.rlcModule	string	“^”
ueD2D.cellularNic.packetFlowObserver.isNrObserver	bool	false
ueD2D.cellularNic.packetFlowObserver.pfmType	string	“PacketFlowObserverUe”
ueD2D.cellularNic.dlFbGen.isNr	bool	false	True for the NR leg (set by NrNicUe on the nrDlFbGen submodule)
ueD2D.cellularNic.dlFbGen.macNodeId	int		MacNodeId of the stack leg this generator belongs to (set by the NIC)
ueD2D.cellularNic.dlFbGen.feedbackType	string	“ALLBANDS”	Can be ALLBANDS, PREFERRED, WIDEBAND
ueD2D.cellularNic.dlFbGen.rbAllocationType	string	“localized”	Resource allocation type (“distributed” or “localized”)
ueD2D.cellularNic.dlFbGen.fbPeriod	int	6tti	Period for Periodic feedback in TTI
ueD2D.cellularNic.dlFbGen.fbDelay	int	1tti	Time interval between sensing and transmission in TTI
ueD2D.cellularNic.dlFbGen.usePeriodic	bool	true	Whether periodic feedback is used in addition to aperiodic feedback
ueD2D.cellularNic.dlFbGen.initialTxMode	string	“SINGLE_ANTENNA_PORT0”	Initial txMode (see LteCommon.h)
ueD2D.cellularNic.dlFbGen.binderModule	string	“binder”
ueD2D.cellularNic.dlFbGen.phyModule	string	“^.phy”
ueD2D.macTable ↗.displayStringTextFormat	string	“addr: %a\nvlan: %v”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.macTable ↗.agingTime	double	120s
ueD2D.macTable ↗.forwardingTable	object	[]
ueD2D.macTable ↗.forwardingTableFile	string	“”
ueD2D.macTable ↗.interfaceTableModule	string
ueD2D.unstructuredApp.source ↗.displayStringTextFormat	string	“created %p pk (%l)”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.unstructuredApp.source ↗.packetNameFormat	string	“%a-%c”	See directives in module documentation
ueD2D.unstructuredApp.source ↗.packetRepresentation	string	“byteCount”	Determines the chunk of the packet data
ueD2D.unstructuredApp.source ↗.packetProtocol	string	“unknown”
ueD2D.unstructuredApp.source ↗.packetLength	int
ueD2D.unstructuredApp.source ↗.packetData	int	-1
ueD2D.unstructuredApp.source ↗.attachCreationTimeTag	bool	true
ueD2D.unstructuredApp.source ↗.attachIdentityTag	bool	true
ueD2D.unstructuredApp.source ↗.attachDirectionTag	bool	true
ueD2D.unstructuredApp.source ↗.clockModule	string	“”	Relative path of a module that implements IClock; optional
ueD2D.unstructuredApp.source ↗.initialProductionOffset	double	-1s	Initial duration before which packets are not produced. When negative, then produce packet in initialize()
ueD2D.unstructuredApp.source ↗.productionInterval	double		Elapsed time between subsequent packets pushed to the connected packet consumer
ueD2D.unstructuredApp.source ↗.scheduleForAbsoluteTime	bool	true	When a clock is used, “relative” means that setting the clock will not affect the simulation time of the event
ueD2D.unstructuredApp.sink ↗.displayStringTextFormat	string	“received %p pk (%l)”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ueD2D.unstructuredApp.sink ↗.clockModule	string	“”	Relative path of a module that implements IClock; optional
ueD2D.unstructuredApp.sink ↗.initialConsumptionOffset	double	0s	Initial duration before which packets are not consumed
ueD2D.unstructuredApp.sink ↗.consumptionInterval	double	0s	Elapsed time between subsequent packets allowed to be pushed by the connected packet producer, 0 means any number of packets can be pushed at the same simulation time
ueD2D.unstructuredApp.sink ↗.scheduleForAbsoluteTime	bool	true	When a clock is used, “relative” means that setting the clock will not affect the simulation time of the event
ueD2D.unstructuredApp.io.interfaceTableModule	string		Relative module path of the interface table
ueD2D.unstructuredApp.io.interface	string	“cellular”	The name of the cellular NIC’s interface

Source code¶

//
// ~SingleCell with its UEs split into cellular terminals (ueCell) and members of
// a D2D multicast group (ueD2D). The rest of the topology is the same: one
// ~eNodeB on an EPC ~PgwStandard, with a router and a server behind it.
//
network SingleCell_D2DMulticast
{
    parameters:
        int numUeCell = default(1);
        int numUeD2D = default(0);
        @display("i=block/network2;bgb=991,558;bgi=background/budapest");
    submodules:
        channelControl: LteChannelControl {
            @display("p=50,25;is=s");
        }
        routingRecorder: RoutingTableRecorder {
            @display("p=50,75;is=s");
        }
        configurator: Ipv4NetworkConfigurator {
            @display("p=50,125;is=s");
        }
        binder: Binder {
            @display("p=50,175;is=s");
        }
        d2dBinder: D2dBinder {
            @display("p=50,425;is=s");
        }
        coreControl: CoreControl {
            @display("p=50,375;is=s");
        }
        bearerConfigurator: BearerConfigurator {
            @display("p=50,225;is=s");
        }
        carrierAggregation: CarrierAggregation {
            @display("p=50,275;is=s");
        }
        server: StandardHost {
            @display("p=212,118;is=n;i=device/server");
        }
        router: Router {
            @display("p=321,136;i=device/smallrouter");
        }
        pgw: PgwStandard {
            @display("p=520,175;is=l");
        }
        eNB: eNodeB {
            @display("p=391,260;is=vl");
        }
        ueCell[numUeCell]: LteUe {
            @display("p=292,367");
        }
        ueD2D[numUeD2D]: LteUe {
            @display("p=477,367");
        }
    connections:
        server.pppg++ <--> Eth10G <--> router.pppg++;
        router.pppg++ <--> Eth10G <--> pgw.dnPppg;
        pgw.pppg++ <--> Eth10G <--> eNB.ppp;
}

File: simulations/lte/networks/SingleCell_D2DMulticast.ned